| Polar Pattern | |
| Element Type | |
| Controls | |
| Analog Output | |
| Power Sources |
| Polar Pattern | |
| Element Type | |
| Sound Field | |
| Orientation | |
| Controls | |
| Circuitry |
| Sensitivity |
| Analog Output | |
| Cable Length |
| Power Sources | |
| Operating Voltage |
| Color | |
| Mounting Thread Size | |
| Dimensions |
No products in the cart.
AED1,099.00
| Polar Pattern |
Omnidirectional
|
| Element Type |
Electret Condenser
|
| Controls |
None
|
| Analog Output |
1x 1/8″ / 3.5 mm TRRS Male
|
| Power Sources |
Plug-In Power
|
| Polar Pattern |
Omnidirectional
|
| Element Type |
Electret Condenser
|
| Sound Field |
Mono
|
| Orientation |
Side or End Address
|
| Controls |
None
|
| Circuitry |
Solid-State
|
| Sensitivity |
-40 dB
|
| Analog Output |
1x 1/8″ / 3.5 mm TRRS Male
|
| Cable Length |
39″ / 99Ā cm
|
| Power Sources |
Plug-In Power
|
| Operating Voltage |
1 to 10 V (Bias/Plug-In Power)
|
| Color |
Black
|
| Mounting Thread Size |
No Mount Included
|
| Dimensions |
Ćø: 2.4″ / Ćø: 60Ā mm
|

The whiteĀ JBL Control 29AV-1Ā is a passive 8″ shielded loudspeaker with a low-saturation transformer designed for voice amplification and foreground music reproduction in a variety of indoor and outdoor venues.
The whiteĀ JBL Control 29AV-1Ā is a passive 8″ shielded loudspeaker with a low-saturation transformer designed for voice amplification and foreground music reproduction in a variety of indoor and outdoor venues. The 110W transformer allows the Control 29AV-1 to be driven by 70V, 100V, or 8-Ohm power amplifiers (available separately). Each Control 29AV-1 is equipped with a durable 8″ Kevlar-cone woofer and a 1″ titanium-diaphragm compression driver, yielding a frequency response of 43 Hz to 15 kHz, and a continuous program power capacity of 300W. With a rotatable horn, the loudspeaker supports positioning for horizontal or vertical orientation.
The built-in crossover network ensures proper frequency distribution to the speaker components as well as smooth tone. SonicGuard circuitry protects against damage incurred through overloading without compromising sound quality. The screw-down terminal strip enables simple wiring, and utilizes nickel/zinc terminals for enhanced resistance to rust. The supplied InvisiBall mounting system and input panel cover contributes to ease of installation. Thanks to judicious magnetic shielding, the Control 29AV-1 may be placed as close as 9″ to video monitors.
Capable of high-power handling and low distortion,Ā JBL’s ceiling mountedĀ Control 26CTĀ is ideal for upscale installs. Its performance ability ensures balanced sound throughout the listening area. The unit includes a multitap transformer for 70/100V systems.
The Control 26CT offers a very broad 110° area of coverage and is designed for longer, cooler operation, which allows for greater long-term power handling. A simpler and less-expensive install is achieved due to the coverage capability of the Control 26CT.
Offering broad, consistent coverage, powerful sound, and a sleek, low-profile enclosure, the whiteĀ SLP14/TĀ fromĀ JBLĀ lays a solid foundation for a wide range of installed audio applications, such as restaurants, retail spaces, hotels, resorts, and even home theater systems. With up to a peak 200W of power handling and a two-way driver system consisting of one 0.79″ tweeter and one 4.5″ woofer, the SLP14/T delivers potent, high-quality sound, and thanks to an award-winning design and a 15° down-tilted angle, it remains flush to the wall.
The 25W multitap transformer can support 70 and 100V or direct 8-ohm operation in installed systems, and connection to amplifiers is easy with a convenient 4-pin Euroblock terminal. This speaker is ADA compliant, at less than 4″ deep, and is capable of handling outdoor installations too, with an IP44 water splash rating. The SPL14/T includes a slide-on wall bracket for easy installation, a 4-pin Euroblock plug, and a protective rain cover for the terminal during outdoor use.
Sending...
04 3550600
052 7036860
info@techsouq.com
There are no reviews yet.