3G-AE015-R Cisco 2900 Series 3G Antennae Option-Spare

Cisco 2900 Series 3G Antennae 3G-AE015-R

The Cisco 3G-AE015-R single-port antenna base is designed for use with portable antennas operating at frequencies up to 6 GHz that connect to 3G wireless high-speed WAN interface cards (HWICs) using a threaded Neill-Concelman (TNC) male connector. This antenna base unit, ordered separately, has 15 feet of plenum LMR-195 cable and can be used with antenna Cisco 3G-ANTM1919D.

The antenna base can be wall-mounted or placed on a rack or desktop, and has the following features:

•Multiple band coverage supporting cellular backahaul installations and wireless LAN (WLAN) and wi-fi networks

•Ergonomic design

Figure 1 shows the Cisco 3G-AE015-R antenna base.

Figure 1 Cisco 3G-AE015-R Antenna Base

Figure 2 shows the Cisco 3G-AE015-R Antenna connected to the Cisco 3G-ANTM-1919D multiband swivel-mount dipole antenna recommended for use with this product.

Figure 2 Cisco 3G-AE015-R Antenna Connected to the Cisco 3G-ANTM1919D Antenna Base

Technical Specifications

The following table lists the technical specifications for the Cisco 3G-AE015-R antenna.

System Requirements

The Cisco 3G-AE015-R antenna base is a remote antenna solution for the Cisco 3G wireless WAN HWICs and should be connected using the 20-ft or 50-ft ultra-low-loss (ULL) cables recommended for this product. It requires an antenna that uses a TNC (male) connector.

For proper use of the antenna base in conjunction with the Cisco 3G-ANTM-1919D antenna, see the Cisco Multiband Swivel Mount Dipole Antenna (3G-ANTM1919D) document.

Installation Notes

Table 1 lists the Cisco antennas that are supported for use with the antenna extension base.