Product Specification:
Model Type: AIT-2 Internal Drive
Product Configuration:
Integrator model – Drive only
Capacity:
Media Maximum: 130 GB (2.6:1 compression)
Hardware Maximum: 130 GB (2.6:1 compression)
Native Capacity of Media: 50 GB
Native Capacity of Hardware: 50 GB
Linear Recording Density: 167,000 bpi
Recording Block Length: Variable or
fixed length blocks
Transfer Rate:
Sustained Transfer Rate: 12.0 MB/s (Compressed)
6.0 MB/s (Native)
Burst Transfer Rate: 12.0 MB/s (Async., Max.)
40.0 MB/s (Sync., Max.)
Speed:
Access Time (Avg.): 27 s (with MIC)
Search Speed: 1,440 MB/s (Compressed)
720 MB/s (Native)
Rewind Speed : 160 inches/s (Max.)
Drum Rotational Speed : 6,400 rpm
Media Load Time (Avg.): 10 s (with MIC)
Buffer Memory: 10 MB
Interface:
Drive: Wide Ultra SCSI
Single-ended / Low Voltage Differential
68-Pin Connector
Reliability:
MTBF: 300,000 POH (100% duty cycle)
Uncorrectable Error Rate: Less than 1017 bits
Read/Write Head Life (Avg.): 50,000 tape contact hours
Media Uses (Avg.): 30,000 end-to-end passes
Physical Dimensions:
Dimensions (WxHxD):
4.0 x 1.62 x 6.10 inches
101.5 x 41.1 x 154.9 mm
Weight: 1 lb 11.5 oz
780 g
Mounting: Horizontal or Vertical
Power:
Power Requirements: DC 5 V ±5%
DC 12 V ±10%
Power Consumption: 12 W (Avg.)
Enviromental:
Operating Temperature: 40° F to 104° F
5° C to 40° C
Non-Operating Temperature: -40° F to 158° F
-40° C to 70° C
Maximum Wet Bulb Temperature: 79° F
26° C
Shock: 5.0 G peak, half sine wave of 3 ms duration
Vibration : .25 G peak, half sine wave of
5 to 500 Hz (swept)
There are no reviews yet.