APC SRT10KXLI SRT 10000VA, 230V Rack-mount or Tower Smart UPS


د.إ24,999.00

APC SRT10KXLI SRT 10000VA, 230V Rack-mount or Tower Smart UPS

Availability
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manageability
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
SmartSlot
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Serial connectivity
Provides management of the UPS via a serial port.
Adaptability
Plug-and-Play external batteries
Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Serviceability
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Cold-start capable
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

SKU: SRT10KXLI Category: Tags: , , , ,
Weight 128.82 kg

Output

Output Power Capacity
10Ā kW /Ā 10 kVA
Max Configurable Power
10Ā kW /Ā 10 kVA
Nominal Output Voltage
230V
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60Hz +/- 3 Hz
Other Output Voltages
220, 240
Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 3-wire (H N + G) Ā 
(6) IEC 320 C13 IEC 320 C13
(4) IEC 320 C19 IEC 320 C19
(3) IEC Jumpers Ā 
Bypass
Internal Bypass (Automatic and Manual)

Input

Nominal Input Voltage
230V, 400V 3PH
Input Frequency
40 – 70 Hz (auto sensing)
Input Connections
Hard Wire 3 wire (1PH+N+G) Ā 
Hard Wire 5-wire (3PH + N + G) Ā 
Input voltage range for main operations
160 – 275V
Input voltage adjustable range for mains operation
100 – 275 (half load), 173 – 476 (half load)V
Other Input Voltages
220, 240, 380, 415

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
1.50Ā hour(s)
Replacement Battery
(Service center technician only)
RBCā„¢ Quantity
2
Extended Run Options
Runtime Graph
Curve Part Number(s)
A SRT10KXLI
B SRT10KXLIĀ 
+ (1)SRT192BP2
C SRT10KXLIĀ 
+ (2)SRT192BP2
D SRT10KXLIĀ 
+ (3)SRT192BP2
E SRT10KXLIĀ 
+ (4)SRT192BP2
F SRT10KXLIĀ 
+ (5)SRT192BP2
G SRT10KXLIĀ 
+ (6)SRT192BP2
H SRT10KXLIĀ 
+ (8)SRT192BP2
I SRT10KXLIĀ 
+ (10)SRT192BP2Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.

Energy Use/Efficiency

Load Efficiency
25% 94.0%
50% 95.1%
75% 95.0%
100% 94.6%

 

Hover over the line on the graph above to view the efficiency at any desired load
Curve fit of data measured in accordance with the ENERGY STAR Program Requirements Product Specification for Uninterruptible Power Supplies (UPSs) – Eligibility Criteria Version 1.0. All measurements taken in normal mode(s), at typical environmental conditions, with 230V/50Hz electrical input and balanced resistive load (PF = 1.0) output.

Communications & Management

Interface Port(s)
Contact Closure, RJ-45 10/100 Base-T, RJ-45 Serial, Smart-Slot, USB
Available SmartSlotā„¢ Interface Quantity
1
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
Yes

Surge Protection and Filtering

Surge energy rating
480Ā Joules

Physical

Maximum Height
432.00Ā mm
Maximum Width
263.00Ā mm
Maximum Depth
715.00Ā mm
Net Weight
111.82Ā KG
Shipping Weight
126.82Ā KG
Shipping Height
461.00Ā mm
Shipping Width
600.00Ā mm
Shipping Depth
1000.00Ā mm
Color
Black

Environmental

Operating Environment
0 – 40Ā Ā°C
Operating Relative Humidity
0 – 95%
Operating Elevation
0-3000Ā meters
Storage Temperature
-15 – 45Ā Ā°C
Storage Relative Humidity
0 – 95% no%
Storage Elevation
0-15000Ā meters
Audible noise at 1 meter from surface of unit
55.00Ā dBA
Online Thermal Dissipation
1947.00Ā BTU/hr
Protection Class
IP 20

Conformance

Regulatory Approvals
C-tick, CE, CE Mark, EAC, EN 50091-1, EN 50091-2, IEC 60950, IEC 62040-2, IRAM, VDE
Standard Warranty
3 years repair or replace (excluding battery) and 2 years for battery

Sustainable Offer Status

RoHS
Compliant
REACH
REACH: Contains No SVHCs
Battery Directive
Compliant
Battery Notes

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “APC SRT10KXLI SRT 10000VA, 230V Rack-mount or Tower Smart UPS”

There are no reviews yet.