No products in the cart.
04 3550600
052 7036860
UPS , Power Back up and accessories
APC Smart UPS VT SUVTP10KH2B4S 10KVA UPS, With 2 Batteries Expandable To 4, Int Maint Bypass, Parallel Capable
Availability:
10 in stock
د.إ36,999.00
10 in stock
APC Smart UPS VT SUVTP10KH2B4S 10KVA UPS, With 2 Batteries Expandable To 4, Int Maintenance Bypass, Parallel Capable
Parallel-capacity capable
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
Smart-UPS VT Features & Benefits
Availability
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime
Allows additional run time to be quickly added as needed.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Serviceability
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Manageability
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Programmable frequency
Ensures compatibility with different input frequencies.
LED status indicators
Quickly understand unit and power status with visual indicators.
SmartSlot
Customize UPS capabilities with management cards.
Total Cost of Ownership
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Protection
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable
Provides temporary battery power when the utility power is out.
| Weight | 550 kg |
|---|
Output
Output Power Capacity
8000 Watts / 10 kVA
Max Configurable Power
8000 Watts / 10 kVA
Nominal Output Voltage
400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
95.2%
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal
Other Output Voltages
380, 415
Crest Factor
3 : 1
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Connections
| (1) Hard Wire 4-wire (3PH + G) | |
| (1) Hard Wire 5-wire (3PH + N + G) | |
| (1) Screw Terminals |
Bypass
Built-in Maintenance Bypass, Built-in Static Bypass
Input
Nominal Input Voltage
400V 3PH
Input Frequency
47 – 70 Hz (auto sensing)
Input Connections
| Hard Wire 5-wire (3PH + N + G) |
Input voltage range for main operations
304 – 477V
Other Input Voltages
380, 415
Maximum Input Current
14A
Input Breaker Capacity
20 A
Batteries & Runtime
Battery Type
VRLA
Included Battery Modules
2
Available Battery Module Slots
2
Typical recharge time
5 hour(s)
RBC™ Quantity
2
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage
+/-154 V
Runtime Graph
| Curve | Part Number(s) |
| A | SUVTP10KH2B4S |
| B | SUVTP10KH2B4S + (1)SYBT4 |
| C | SUVTP10KH2B4S + (2)SYBT4 |
| D | SUVTP10KH2B4S + (1)SUVTXR6B6S |
| E | SUVTP10KH2B4S + (2)SUVTXR6B6S |
Hover over the line on the graph above to view the runtime at any desired load
Estimated runtimes based on battery vendor data, at typical environmental conditions, with no electrical input and balanced PF = 0.8 output.
Communications & Management
Interface Port(s)
DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms : configurable delays
Emergency Power Off (EPO)
Yes
Physical
Maximum Height
1499.00 mm
Maximum Width
559.00 mm
Maximum Depth
813.00 mm
Net Weight
415.00 KG
Shipping Weight
445.91 KG
Shipping Height
1643.00 mm
Shipping Width
650.00 mm
Shipping Depth
1062.00 mm
Color
Black
Units per Pallet
1.00
Environmental
Operating Environment
0 – 40 °C
Operating Relative Humidity
0 – 95%
Operating Elevation
0-999.9 meters
Storage Temperature
-50 – 40 °C
Storage Relative Humidity
0 – 95%
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
64.00 dBA
Online Thermal Dissipation
1774.00 BTU/hr
Protection Class
IP 20
Conformance
Regulatory Approvals
C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111
Standard Warranty
1 year repair or replace, Start-Up Service
There are no reviews yet.