Cisco WS-X6716-10G-3C Catalyst 6500 16 Port 10GB 10 Gigabit Module
WS-X6716-10G-3C Overview
WS-X6716-10G-3C consists of 16 X2 10 Gigabit Ethernet fiber ports line card module for Cisco Catalyst 6500 series only.* WS-X6716-10G-3C equipped with WS-X6716-10G and WS-F6700-DFC3C and primarily designed for Supervisor Engine 720 with 3C daughter card to support Cisco 6500 Virtual Switching System (VSS) 1440. WS-X6716-10G-3C is ideally suited for LAN campus aggregation and data center access. Users can configure 4 port groups of 4 ports each, each port group in either oversubscription mode or performance mode. In performance mode, up to 4 10 Gigabit Ethernet ports can be used to create a virtual switch link in a VSS.
WS-X6716-10G-3C Specifications
Model info: | WS-X6716-10G-3C | Ā |
Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6716-10G-3C | Ā |
Devide Tyde | 10 Gigabit Ethernet interface Fiber module | Ā |
Ports | 16 * 10G X2 ports | Ā |
Switch fabric connection | 40 Gbps (80 Gbps full duplex) | Ā |
Forwarding Engine | WS-F6700-DFC3C | Ā |
routing entries | 256,000 | Ā |
Queues | Oversubscription mode ā Receive: 1 priority queue, 7 round robin queues, 2 threshold per port ā Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group |
Performance mode: ā Receive: 8 priority queue, 4 threshold per port ā Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group
|
Scheduler | Oversubscription mode: ā DWRR ā WRED |
Performance mode: ā DWRR ā WRED ā SRR at egress |
Virtual Switch Link (VSL) | Oversubscription mode: No | Performance mode: Yes (supported in a subsequent software release) |
Port buffers | Oversubscription mode: ā 90 MB per port group |
Performance mode: ā 200 MB per port |
Queuing Mechanisms | ā CoS-based queue mapping ā DSCP-based queue mapping |
Ā |
Hardware-based Multicast replication (Layer 2) | ā Ingress and egress ā Approximately 20 GB per replication engine ā 2 replication engines per module |
Ā |
Hardware-based multicast replication (layer 3) | ā Ingress and egress ā Approximately 20 GB per replication engine ā 2 replication engines per module |
Ā |
Jumbo frame support for bridged and routed packets | Up to 9216 bytes | Ā |
Maximum port density per chassis | 130 ports (9-slot chassis) | Ā |
Maximum port density per VSS | 260 ports | Ā |
Supervisor engines supported | Cisco Catalyst 6500 Series Supervisor Engine VS-S720-10G-3C | Ā |
Chassis supported | ā Cisco Catalyst 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E, 6513-E and C6509-NEB-A chassis with dual fan tray ā Cisco Catalyst 6506, 6509, 6513, and C6509-NEB-A with single fan tray |
ā Not supported in Cisco Catalyst 6503 non-E Series chassis and 7600 Series chassis |
Slot requirements | ā Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E, or 6509-NEB-A chassis | ā Can occupy only slots 9 through 13 in a Cisco Catalyst 6513 chassis |
Onboard memory | 1 GB default | Ā |
Power requirement | 457.8W (10.9A @ 42V) | Ā |
X2 Pluggable Optics part number | ā X2-10GB-LRM(multimode fiber): 1310 nm serial, 220m over multimode fiber ā X2-10GB-LR(single-mode fiber): 1310 nm serial, 10 km over single-mode fiber ā X2-10GB-ER(single-mode fiber): 1550 nm serial, 40 km over single-mode fiber ā X2-10GB-ZR: 1550 nm serial, 80 Km over single-mode fiber |
ā X2-10GB-SR(multimode fiber): 850 nm serial, up to 300m over multimode fiber ā X2-10GB-LX4(multimode fiber): WWDM 1310 nm, up to 300m over multimode fiber |
There are no reviews yet.