04 3550600
052 7036860
info@techsouq.com
Cisco CISCO2811 Integrated Services Router
Interface Types:Ā USB 1.1, Ethernet RJ45
Electrical Interface:Ā Ethernet Fast – 100Mbps
On-Board Cache:Ā 256MB
Bays/Ports/Slots:Ā 2
U Height:Ā 1U
Voltage:Ā 110-240V Multi
AED799.00
Cisco CISCO2811 / 2811 2800 Series Integrated Services Router – 2 FE, 1NME, 4 HWIC, 2 PVDM Slots, 256MB DRAM, 64MB Flash – Refurbished
Cisco CISCO2811 / 2811 2800 Series Integrated Services Router – 2 FE, 1NME, 4 HWIC, 2 PVDM Slots, 256MB DRAM, 64MB Flash – Refurbished
Cisco Systems Ā®, Inc. redefined best-in-class enterprise and small- to- midsize business routing with a new line of integrated services routers that are optimized for the secure, wire-speed delivery of concurrent data, voice, video, and wireless services. Founded on 20 years of leadership and innovation, the Cisco Ā® 2800 Series of integrated services routers (refer to Figure 1) intelligently embed data, security, voice, and wireless services into a single, resilient system for fast, scalable delivery of mission-critical business applications. The unique integrated systems architecture of the Cisco 2800 Series delivers maximum business agility and investment protection.
| Specifications | |
|---|---|
| DRAM |
|
| Compact Flash |
|
| Fixed USB 1.1 Ports | 2 |
| Onboard LAN Ports | 2-10/100 |
| Onboard AIM (Internal) Slot | 2 |
| Interface Card Slots | 4 slots, each slot can support HWIC, WIC, VIC, or VWIC type modules |
| Network-Module Slot | 1 slot, supports NM and NME type modules |
| Extension Voice Module Slot | 0 |
| PVDM (DSP) Slots on Motherboard | 2 |
| Integrated Hardware-Based Encryption | Yes |
| VPN Hardware Acceleration (on Motherboard) | DES, 3DES, AES 128, AES 192, and AES 256 |
| Optional Integrated In-Line Power (PoE) | Yes, requires AC-IP power supply |
| Console Port (up to 115.2 kbps) | 1 |
| Auxiliary Port (up to 115.2 kbps) | 1 |
| Minimum Cisco IOS Software Release | 12.3(8)T |
| Rack Mountable | Yes, 19- and 23-in. options |
| Wall Mountable | Yes |
| Power Requirements | |
| AC Input Voltage | 100 to 240 VAC, autoranging |
| AC Input Frequency | 47-63 Hz |
| AC Input Current | 2A (110V) 1A (230V) |
| AC Input Surge Current | 50A maximum, one cycle |
| AC-IP Maximum In-Line Power Distribution | 160W |
| AC-IP Input Current | 4A (110V) 2A (230V) |
| AC-IP Input Surge Current | 50A maximum, one cycle |
| DC Input Voltage | 24 to 60 VDC, autoranging positive or negative |
| DC Input Current |
|
| Typical Power Dissipation (No Modules) | 32W (109 BTU/hr) |
| Power Dissipation-AC without IP Phone Support | 170W (580 BTU/hr) |
| Power Dissipation-AC with IP Phone Support-System Only | 210W (717 BTU/hr) |
| Power Dissipation-AC with IP Phone Support-IP Phones | 160W (546 BTU/hr) |
| Power Dissipation-DC | 180W (614 BTU/hr) |
| RPS | External only, connector for RPS provided by default |
| Recommended RPS Unit | Cisco RPS-2300 Redundant Power System |
| Environmental Specifications | |
| Operating Temperature | 32Ā° to 104Ā°F (0Ā° to 40Ā°C) |
| Non-Operating Temperature | -40Ā° to 158Ā°F (-40Ā° to 70Ā°C) |
| Maximum Operating Temperature at Altitude |
|
| Operating Humidity | 5 to 85%RH, non-condensing |
| Dimensions (H x W x D) |
|
| Rack Height | 1 rack unit (1RU) |
| Weight (Fully Configured) | 14 lb (6.4 kg) |
| Noise Level (Min/Max) |
|
Alternate MPNs:Ā 2811
Weight:Ā 17Ā lb
There are no reviews yet.