Placeholder

Silicom PXG6I RoHS Server 6-Port Gigabit Adapter


Interface Types:Ā Ethernet RJ45

AED1,499.00

Silicom PX-Series Server 6-port RoHSĀ Gigabit adapter / Card / NIC – PXG6 – New Pull
The Silicom PX-Series Server Gigabit adapters are 64-bit/133MHz PCI-X network interface cards that contain multiple / single independent Gigabit port/s on one PCI-X adapter.
Silicom PX-Series Server adapters are based on the fourth generation of Broadcom BCM57XX PCI-X Gigabit Ethernet controllers that feature industry leading performance for PCI-X server Adapters.

KEY features

Copper Gigabit Ethernet 1000Base-T:
• Independently copper Gigabit Ethernet channels support six, four, two and one Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T).
• Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation.
• Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex.

SKU: PXG6I Category:
Interface Standard:
PCI v2.2 32/64 bit, 33/66Mhz
PCI-X v1.0 32/64-bit, 66/100/133MHz
Board Size: PCI add in card 175mm x 107mm (6.9ā€x4.2ā€)
PCI Card Type: +3.3V 64 bit Card
PCI Connector: +3.3V 64 bit
PCI Voltage: +5V (Min 4.75V, Max, 5.25V)
Holder: Metal Bracket
Weight: 180Ā gram (6.35 oz)
Power Consumption: 2.4A at 5V: Typical all ports operate at 1000Mbit/s.
1.3A at 5V: Typical all ports operate at 100Mbit/s.
1.1A at 5V: Typical all ports operate at 10Mbit/s.
1.1A at 5V: Typical No link at all ports.
Operating Temperature: 0°C – 50°C (32°F – 122°F)
Storage Temperature: -20°C–65°C (-4°F–149°F)
EMC Certifications: FCC Part 15, Subpart B Class A
Conducted Emissions
Radiated Emissions
CE EN 55022: 1998 Class A
Conducted Emissions
Radiated Emissions
CE EN 55024: 1998
Immunity for ITE Amendment A1: 2001
CE EN 61000-3-2 2000
Harmonic Current Emissions
CE EN 61000 3-3
Voltage Fluctuations and Flicker
CE IEC 6100-4-2: 1995
ESD Air Discharge 8kV. Contact Discharge 4kV.
CE IEC 6100-4-3:1995
Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz
CE IEC 6100-4-4:1995
EFT/B: Immunity to electrical fast transients 1kV Power
Leads, 0.5Kv Signals Leads
CE IEC 6100-4-5:1995
Immunity to conductive surges COM Mode; 2kV,
Dif. Mode 1kV
CE IEC 6100-4-6:1996
Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.
By 1kHz
CE IEC 6100-4-11:1994
Voltage Dips and Short Interruptions
V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per
MTBF*: 97 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature – 25ļ‚°C. Temperature rise of 10ļ‚°C above the system ambient temperature was assumed for the cards components.

 

PXG6: LED / Connector Specifications

LEDs: (2) LEDs per port
Link: Turns on any Link speed (green).
Activity: Blinks on activity (green).
LEDs location LEDS are located in the RJ-45 connector
Connectors: (6) Shielded RJ-45

 

Copper Gigabit Ethernet Technical Specifications – (1000Base-T) Adapters:

IEEE Standard / Network topology: Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex Support both Simplex & Full duplex operation in all operating speeds
Auto negotiation: Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s.
Data Transfer Rate: 1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port.
2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port.
Cables and Operating distance: 10Base-T Category 3, 4, or 5 maximum 50m *
100Base-Tx Category 5 maximum 50m *
1000Base-T Category 5E maximum 50m *
*Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard

 

Operating Systems Support (all adapters):

Operating system support: Windows.NET
Windows 2000
Windows NT
Windows98 / WindowsXP
Netware
Linux
FreeBSD
Unix:
SCO Open Server
UnixWare / OpenUnix 8
Solaris

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Silicom PXG6I RoHS Server 6-Port Gigabit Adapter”

There are no reviews yet.