04 3550600
052 7036860
info@techsouq.com
WS-C2960S-48FPD-L Catalyst 2960-S Series GE Switch
| Model: | WS-C2960S-48FPD-L Catalyst 2960-S Series GE Switch |
| Detail: |
Cisco Catalyst 2960S-48FPD Layer 2 – Gigabit Ethernet Switch – 48 x 10/100/1000 PoE Ports – 740W – 2 x 10G SFP – LAN Base –
|
AED43,999.00
WS-C2960S-48FPD-L is one of the Cisco Catalyst 2960-S Switches, which are the leading Layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Catalyst 2960-S Series Switches include new FlexStack switch stacking capability with 1 and 10 Gigabit connectivity, and Power over Ethernet Plus (PoE+) with the Cisco Catalyst 2960 Series Switches offering Fast Ethernet access connectivity and PoE capabilities. The Cisco Catalyst 2960-S are fixed-configuration access switches designed for enterprise, midmarket, and branch office networks to provide lower total cost of ownership.
Quick Specs
Figure 1 shows the appearance of the WS-C2960S-48FPD-L.
Table 1 shows the Quick Spec of the WS-C2960S-48FPD-L.
| Product Code | WS-C2960S-48FPD-L |
| Enclosure Type | Rack-mountable – 1U |
| Feature Set | LAN Base |
| PoE capacity | 740W |
| Uplink Interfaces | 2 x 10 Gigabit SFP+ or 2 x 1 Gigabit Ethernet SFP+ uplink ports |
| Downlink Ports | 48 Ć Ethernet 10/100/1000 PoE+ ports |
| Expansion Slot(s) | 1 (total) / 1 (free) x Stacking Module |
| Switching capacity | 176 Gbps |
| Forwarding/Filtering Rate: | 77.4 Mpps |
| DRAM | 128 MB |
| Flash Memory | 64 MB |
| Dimensions | 44.5 Ć 38.6 Ć 4.5 cm |
| Package Weight | 10.65 Kg |
Product Details
Figure 2 shows the front panel of the WS-C2960S-48FPD-L.
Note:
| ā | 48 Ć Ethernet 10/100/1000 PoE+ ports | ā£ | RJ45 Console Port |
| ā” | USB Type A Port | ā¤ | Ethernet Management Port |
| ā¢ | USB mini-Type B (console) Port | ā„ | SFP Module Slots |
Figure 3 shows the back panel of the WS-C2960S-48FPD-L.
Note:
| ā | 1 (total) / 1 (free) x Stacking Module | ā¢ | RPS Connector |
| ā” | Fan Exhaust | ā£ | AC power connector |
WS-C2960S-48FPD-L Specification |
|
|
General Information |
|
| Device Type | Switch – 48 ports – Managed |
| Enclosure Type | Rack-mountable – 1U |
| Ports | 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
| Power Over Ethernet (PoE) | Yes |
| Performance | Switching capacity : 176 Gbps Forwarding performance (64-byte packet size) : 101.2 Mpps |
| MAC Address Table Size | 8K entries |
| Remote Management Protocol | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH |
| Encryption Algorithm | SSL |
| Authentication Method | Secure Shell (SSH), RADIUS, TACACS+ |
| Features | Layer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
| Compliant Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at |
| RAM | 128 MB |
| Flash Memory | 64 MB Flash |
| Status Indicators | Port status, link activity, port transmission speed, port duplex mode, power, system |
|
Expansion / Connectivity |
|
| Interfaces | 48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 – PoE USB : 1 x 4 pin USB Type A 1 x console – mini-USB Type B – management 1 x console – RJ-45 – management 1 x 10Base-T/100Base-TX – RJ-45 – management 2 x SFP+ |
| Expansion Slot(s) | 1 (total) / 1 (free) x Stacking Module |
|
Power |
|
| Power Device | Power supply – internal |
| Voltage Required | AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational | 81 Watt |
|
Miscellaneous |
|
| Width | 17.5 in (44.5 cm) |
| Depth | 15.2 in (38.6 cm) |
| Height | 1.8 in (4.5 cm) |
| Weight | 13 lb (5.9 Kg) |
| Package Weight | 23.5 lb (10.65 Kg) |
| Rack Mounting Kit | Optional |
| MTBF | 183,498 hour(s) |
| Compliant Standards | TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A |
|
Software / System Requirements |
|
| Software Included | Cisco IOS LAN Base |
| Service & Support | Limited lifetime warranty |
| Service & Support Details | Limited warranty – replacement – lifetime – response time: next business day Limited warranty – power supply and fans – 5 years New releases update |
|
Environmental Parameters |
|
| Min Operating Temperature | 23 Ā°F |
| Max Operating Temperature | 104 Ā°F |
| Humidity Range Operating | 10 – 95% (non-condensing) |
| Min Storage Temperature | -13 Ā°F |
| Max Storage Temperature | 158 Ā°F |
| Humidity Range Storage | 10 – 95% (non-condensing) |
There are no reviews yet.