EH1BS9703E00 Huawei S9700 Series Switch


Model: EH1BS9703E00 Huawei S9700 Series Switch
Detail:
S9703 Assembly Chassis, 3 Slots

AED3,499.00

EH1BS9703E00 is the Huawei S9703 Assembly Chassis with 3 Slots. The S9700 series terabit routing switches are high-end switches designed for next-generation campus networks and data centers to implement service aggregation. EH1BS9703E00 is only a chassis without any modules. The service cards, MPUs, fan module, power supply modules must be ordered separately.

Quick Specs

Table 1 shows the Quick Specs of Huawei S9703 switch.

Product Code S9703
Switching Capacity 2.88 Tbit/s or 5.76 Tbit/s
Packet Forwarding Rate 2,160 Mpps
Service Slots 3
IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+

Dimensions (H x W x D) 175 mm x 442 mm x 489 mm, 4U
Chassis Weight (empty) 11 kg
Operating Voltage DC: –40V to –72V

AC: 90V to 290V

Equipment Power Supply Capability 2,200W

 

Note:

ā‘  Three service cards slots ā‘£ Two power modules slots
ā‘” Two MPUs slots ⑤ Reserved slot
ā‘¢ A pair of mounting brackets ā‘„ Front ESD jack

 

Note:

ā‘  Fan Module Slot

EH1BS9703E00 Specification

Switching capacity Ā 2.88/5.76
Packet forwardingĀ rate Ā 2160 Mpps
Service slots Ā 3
Wireless networkĀ management

Ā 

Native AC

AP access control, AP region management, and AP profile management

Radio profile management, uniform static configuration, and centralized dynamic

management

Basic WLAN services, QoS, security, and user management

User management

Ā 

unified user management

802.1x, MAC address, and Portal authentication

Traffic- and time-based accounting

User authorization based on user groups, domains, and time ranges

iPCA qualityĀ awareness

Ā 

Marking real service packets to obtain real-time count of dropped packets and

packet loss ratio

Counting number of dropped packets and packet loss ratio on devices and L2/L3

networks

SVF 2.0 virtualization

Ā 

Virtualizing access switches (ASs) and APs into one logical device to simplify

management and maintenance

Two layers of ASs allowed in an SVF system

Third-party devices allowed between SVF parent and clients

VLAN

Ā 

Supports adding access, trunk, and hybrid interfaces to VLANs

Supports the default VLAN

Supports VLAN switching

Supports QinQ and selective QinQ

Supports MAC address-based VLAN assignment

MAC address

Ā 

Supports automatic learning and aging of MA C addresses

Supports static, dynamic, and blackhole MAC address entries

Supports packet filtering based on sour ce MAC addresses

Supports MAC address limiting based on ports and VL ANs

STP/ERPS

Ā 

Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

Supports BPDU protection, root protection, and loop protection

Supports BPDU tunnel

ERPS (G.8032)

IP routing

Ā 

Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS

Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and

BGP4+

Multicast

Ā 

Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping

Supports PIM-SM, PIM-DM, PIM-SSM

Supports MSDP, MBGP

Supports prompt leave

Supports multicast traffic control

Supports multicast querier

Supports suppression on multicast packets

Supports multicast CAC

Supports multicast ACL

MPLS

Ā 

Supports basic MPLS functions

Supports MPLS OAM

Supports MPLS TE

Supports MPLS VPN/VLL/VPLS

Reliability

Ā 

Supports LACP and E-Trunk

Supports VRRP and BFD for VRRP

Supports BFD for BGP/IS-IS/OSPF/static route

NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP

Supports TE FRR and IP FRR

Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level)

HSR

Supports ITU-Y.1731

Supports DLDP

QoS

Ā 

Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4

protocols, and 802.1p priority

Supports actions of ACL, CAR, re-mark, and schedule

Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and

SP+DRR

Supports congestion avoidance mechanisms, such as WRED and tail drop

Supports H-QoS

Supports traffic shaping

NetworkĀ synchronization Ethernet synchronization

1588v2

Dimensions (H x W xĀ D in mm) 175 x 442 x 489, 4U
Chassis weight(empty) 11 kg
Power supplyĀ capability of theĀ equipment 2200W

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EH1BS9703E00 Huawei S9700 Series Switch”

There are no reviews yet.