04 3550600
052 7036860
info@techsouq.com
Network Switches & Routers
ES1B03SACM0N Huawei S7700 Series switch
| Model: | ES1B03SACM0N Huawei S7700 Series switch |
| Detail: |
S7703 Basic Engine AC Bundle (Including Assembly Chassis,MCUA Main Board*1,800W AC Power*2,48-Port
|
AED48,799.00
ES1B03SACM0N is the Huawei S7703 Basic Engine AC Bundle (Including Assembly Chassis, MCUA Main Board*1,800W AC Power*2,48-Port 10/100/1000BASE-T Interface Card(FA,RJ45)*1,2-Port 10GBASE-X Interface Card(EA,XFP)*1).
Quick Specs
Ā Ā Table 1 shows the Quick Specs.
| Product Code | ES1B03SACM0N |
| Forwarding Performance | 1,440 Mpps |
| Switching Capacity | 1.92 Tbit/s |
| Service Slots | 3 |
| Redundancy Design | Supervisors, Power modules, CMUs, Fans trays |
| MPU Slots | 2 |
| LPU slots | 3 |
| System power supply slots | 2 |
| Fan slots | 1 |
| PoE power supply slots | 1 |
| Maximum PoE Power | 2,200W |
| Maximum power consumption (fully loaded) | 1000 W |
| Working Voltage | DC: ā38.4V to ā72V
AC: 90V to 290V |
| Dimensions (W x D x H, excluding rack-mounting brackets) | With cable management frames: 442 mm x 585 mm x 175 mm (17.4 in. x 23.0 in. x 6.9 in. (4 U))
Without cable management frames: 442 mm x 489 mm x 175 mm (17.4 in. x 19.3 in. x 6.9 in. (4 U)) |
| Weight (empty/fully loaded) | 10 kg/22 kg (22.0 lb/48.5 lb) |
Product Details
Note:
| ā | Three service cards, including:
|
| ā” | Two MPUs |
| ā¢ | Ā A pair of mounting brackets |
| ā£ | Two power modules |
| ā¤ | Ā One PoE power modules |
| ā„ | Front ESD jack |
| ā¦ | Cable management frames |
Note:
| ā | One Fan Module |
| ā” | Ground screw |
| ā¢ | Rear ESD jack |
| ā£ | Air filter |
ES1B03SACM0N Specifications |
|
| Switching Capacity | 1.92 Tbit/s |
| Forwarding Performance | 1,440 Mpps |
| Service Slots | 3 |
| Redundancy Design | Supervisors, power modules, CMUs, fans trays |
| Wireless Network Management | Native AC |
| AP access control, AP region management, and AP profile management | |
| Radio profile management, uniform static configuration, and centralized dynamic management | |
| Basic WLAN services, QoS, security, and user management | |
| Deployment of ACs on different network layers | |
| User Management | Unified user management |
| 802.1x, MAC address, and Portal authentication | |
| Traffic- and time-based accounting | |
| User authorization based on user groups, domains, and time ranges | |
| VLAN | Three types of interfaces: access, trunk, and hybrid |
| Default VLAN | |
| VLAN switching | |
| QinQ and selective QinQ | |
| MAC address-based VLAN assignment | |
| ARP | 256K ARP entries |
| MAC Address | 1M MAC address entries |
| MAC address learning and aging | |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| Limit on the number of MAC addresses learned on ports and VLANs | |
| Ring Protection | STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
| SEP | |
| BPDU protection, root protection, and loop protection | |
| BPDU tunnel | |
| ERPS (G.8032) | |
| IP Routing | 1M IPv4 routing entries |
| IPv4 routing protocols, such as RIP v1/v2, OSPF, BGP, and IS-IS | |
| IPv6 dynamic routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ | |
| Multicast | 128,000 multicast routing entries |
| IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping | |
| PIM-DM, PIM-SM, and PIM-SSM | |
| MSDP and MBGP | |
| Fast leave | |
| Multicast traffic control | |
| Multicast querier | |
| Multicast packet suppression | |
| Multicast CAC | |
| Multicast ACL | |
| MPLS | Basic MPLS functions |
| MPLS OAM | |
| MPLS-TE | |
| MPLS VPN/VLL/VPLS | |
| CSS Switch Fabric Clustering | CSS Switch Fabric Clustering (S7706 and S7712) |
| Service Port Clustering | Service Port Clustering (S7706 and S7712) |
| Reliability | LACP and E-Trunk between devices |
| VRRP and BFD for VRRP | |
| BFD for BGP/IS-IS/OSPF/static route | |
| NSF and GR for BGP/IS-IS/OSPF/LDP | |
| TE FRR and IP FRR | |
| HSR | |
| Ethernet OAM (IEEE 802.3ah and 802.1ag) | |
| ITU-Y.1731 | |
| DLDP | |
| QoS | 256K ACLs |
| Traffic classification based on Layer 2 protocol packet header, Layer 3 protocol information, Layer 4 protocol information, and 802.1p priority | |
| ACL, CAR, re-marking, and scheduling | |
| Queue scheduling algorithms including PQ, WRR, DRR, PQ + WRR, and PQ + DRR | |
| Congestion avoidance mechanisms, such as WRED and tail drop | |
| HQoS | |
| Traffic shaping | |
| Configuration and Maintenance | Zero-Touch Provisioning |
| Console and SSH terminals | |
| Network management protocols, such as SNMP v1/v2c/v3 | |
| File uploading and downloading using FTP and TFTP | |
| BootROM upgrade and remote upgrade | |
| Hot patches | |
| User operation logs | |
| Security and Management | 802.1x authentication and portal authentication |
| MACSec | |
| NAC | |
| RADIUS and HWTACACS authentication | |
| Different user levels for commands, preventing unauthorized users from using certain commands | |
| Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks | |
| Ping and traceroute | |
| RMON | |
| Service Chain | |
| Time synchronization | IEEE 1588v2 |
| SyncE | |
| Value-added Service* | Firewall |
| NAT | |
| NetStream | |
| IPSec | |
| Load balancing | |
| IPS | |
| Interoperability | Supports VBST (compatible with PVST/PVST+/RPVST) |
| Supports LNP (similar to DTP) | |
| Supports VCMP (similar to VTP) | |
| Energy Conservation | IEEE 802.3az: Energy Efficient Ethernet (EEE) |
| Dimensions (W x D x H) | 442 mm x 489 mm x 175 mm |
| Chassis Weight (empty) | 10 kg |
| Working Voltage | DC: ā38.4V to ā72V
AC: 90V to 290V |
| Maximum Power
Consumption of the Entire Equipment |
2,200W |
| Maximum PoE Power | 2,200W |
There are no reviews yet.