CE7850-32Q-EI-F Specifications
|
| Ports |
32 x 40 GE QSFP+ |
| Switching Capacity |
2.56 Tbit/s |
| Forwarding Performance |
1,440 Mpps |
| Airflow Design |
Front-to-back or back-to-front |
| Device Virtualization |
iStack |
| SVF |
| M-LAG |
| Network Virtualization |
TRILL |
| VXLAN routing and bridging |
| BGP-EVPN |
| QinQ access VXLAN |
| IPv6 over VXLAN |
| SDN |
Agile Controller |
| VMware NSX |
| Network Convergence |
FCoE |
| DCBX, PFC, and ETS |
| Programmability |
OPS |
| Puppet, Ansible, and OVSDB plug-ins released on open source websites |
| Linux containers for open-source and customized programming |
| Traffic Analysis |
NetStream |
| sFlow |
| VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
| Default VLAN |
| QinQ |
| MUX VLAN |
| GARP VLAN registration protocol (GVRP ) |
| ACL |
Ingress: 3,750; Egress: 1,000 |
| MAC Address Table |
Maximum: 288k |
| Dynamic learning and aging of MAC addresses |
| Static, dynamic, and black hole MAC address entries |
| Packet filtering based on source MAC addresses |
| MAC address limiting based on ports and VLANs |
| ARP |
Maximum: 128k |
| ND |
Maximum: 48k |
| IPv4 FIB |
Maximum: 256k |
| IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
| IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ |
| IPv6 FIB |
Maximum: 128k |
| IPv6 |
IPv6 Neighbor Discovery (ND) |
| Path MTU Discovery (PMTU) |
| TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 |
| Multicast FIB |
Maximum: 8k |
| Multicast |
IGMP, PIM-SM, PIM-DM,Ā MSDP, and MBGP |
| IGMP snooping |
| Fast leave of multicast member interfaces |
| Multicast traffic suppression |
| Multicast VLAN |
| MPLS |
MPLS |
| Reliability |
LACP |
| STP, RSTP, VBST, and MSTP |
| BPDU protection, root protection, and loop protection |
| Smart Link and multi-instance |
| DLDP |
| ERPS (G.8032) |
| VRRP, VRRP load balancing, and BFD for VRRP |
| BFD for BGP/IS-IS/OSPF/Static route |
| QoS |
Traffic classification based on L2 headers, L3 protocols, L4 protocols, and 802.1p priority |
| Actions of ACL, CAR, re-marking, and scheduling |
| Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR |
| Congestion avoidance mechanisms, including WRED and tail drop |
| Traffic shaping |
| Configuration and Maintenance |
Console, Telnet, and SSH terminals |
| Network management protocols, such as SNMP v1/v2c/v3 |
| File upload and download through FTP and TFTP |
| BootROM upgrade and remote upgrade |
| 802.3az Energy Efficient Ethernet (EEE) |
| Hot patches |
| User operation logs |
| Zero-Touch Provisioning (ZTP) |
| Security and Management |
802.1x authentication |
| Command line authority control based on user levels, preventing unauthorized users from using commands |
| DoS, ARP, and ICMP attack defenses |
| Port isolation, port security, and sticky MAC |
| Binding of the IP address, MAC address, interface and VLAN |
| Authentication methods, including AAA, RADIUS, and HWTACACS |
| Remote Network Monitoring (RMON) |
| Dimensions (W x D x H) |
17.4 in. x 23.9 in. x 1.7 in. (442 mm x 607 mm x 43.6 mm) |
| Weight (fully loaded) |
11.2 kg (24.7 lb) |
| Environment Parameters |
Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% RH to 95% RH, non-condensing |
| Operating Voltage |
90V AC to 290V AC |
| Maximum Power Consumption |
431W |
There are no reviews yet.