04 3550600
052 7036860
C9115AXE-A – Cisco Catalyst 9115 Access Point
|
Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4×4:4 MIMO, A Domain
|
8,599.00 د.إ
C9115AXE-A Overview
CiscoĀ® CatalystĀ® 9115 Series Wi-Fi 6 Access Points are the next generation of enterprise access points. They are resilient, secure, and intelligent. C9115AXE-A is the Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4×4:4 MIMO, A Domain.
Product Details
Cisco AP 9115 series provides these features:
– 802.11ax (Wi-Fi 6)
– Uplink/downlink OFDMA
– MUāMIMO technology
– BSS coloring
– Target wake time
– Cisco Mobility Express
– Multigigabit Ethernet support
– Bluetooth 5.0
– Apple Features
C9115AXE-A Specification
C9115AXE-A Specification |
|
| Description | Cisco Catalyst 9115AX Access Point, External antenna; Wi-Fi 6; 4×4:4 MIMO, A Domain |
| Software | āĀ Ā Cisco Unified Wireless Network Software Release 8.9 or later
āĀ Ā Cisco IOSĀ Ā®Ā XE Software Release 16.11 or later |
| Supported wireless LAN controllers | āĀ Ā Cisco Catalyst 9800 Series Wireless Controllers
āĀ Ā Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities | āĀ Ā 4×4 MIMO with four spatial streams
āĀ Ā Maximal Ratio Combining (MRC) āĀ Ā 802.11n and 802.11a/g beamforming āĀ Ā 20- and 40-MHz channels āĀ Ā PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) āĀ Ā 802.11 Dynamic Frequency Selection (DFS) āĀ Ā Cyclic Shift Diversity (CSD) support |
| 802.11ac | āĀ Ā 4×4 downlink MU-MIMO with four spatial streams
āĀ Ā MRC āĀ Ā 802.11ac beamforming āĀ Ā 20-, 40-, 80-, and 160-MHz channels āĀ Ā PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz) āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) āĀ Ā 802.11 DFS āĀ Ā CSD support |
| 802.11ax | āĀ Ā 4×4 downlink MU-MIMO with four spatial streams
āĀ Ā Uplink/downlink OFDMA āĀ Ā TWT āĀ Ā BSS coloring āĀ Ā MRC āĀ Ā 802.11ax beamforming āĀ Ā 20-, 40-, 80-, and 160-MHz channels āĀ Ā PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) āĀ Ā 802.11 DFS āĀ Ā CSD support |
| Integrated antenna | āĀ Ā 2.4 GHz, peak gain 3 dBi, internal antenna, omnidirectional in azimuth
āĀ Ā 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
| External antenna (soldĀ separately) | āĀ Ā Cisco Catalyst 9115AXE Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
āĀ Ā Cisco offers the industry’s broadest selection ofĀ antennas, delivering optimal coverage for a variety of deployment scenarios |
| Interfaces | āĀ Ā 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) ā IEEE 802.3bz
āĀ Ā Management console port (RJ-45) āĀ Ā USB 2.0 (enabled via future software) |
| Indicators | āĀ Ā Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (WĀ xĀ LĀ xĀ H) | āĀ Ā Access point (without mounting brackets): C9115I: 8.0 x 8.0 x 1.5 in. (20.3 x 20.3 x 3.8 cm), C9115E: 8.0 x 8.0 x 1.7 in. (20.3 x 20.3 x 4.3 cm) |
| Input power requirements | āĀ Ā 802.3at Power over Ethernet Plus (PoE+), Ā 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOEĀ Ā®)
āĀ Ā Cisco power injector, AIR-PWRINJ6= āĀ Ā 802.3af PoE āĀ Ā Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) Note: When 802.3af PoE is the source of power, both 2.4-GHz and 5-GHz radios will be reduced to 2×2 and Ethernet downgraded to 1 Gigabit Ethernet. In addition, the USB port will be off. |
| Environmental | Cisco Catalyst 9115AXI
āĀ Ā Nonoperating (storage) temperature: -22Ā° to 158Ā°F (-30Ā° to 70Ā°C) āĀ Ā Nonoperating (storage) altitude test: 25ĖC, 15,000 ft. āĀ Ā Operating temperature: 32Ā° to 122Ā°F (0Ā° to 50Ā°C) āĀ Ā Operating humidity: 10% to 90% (noncondensing) āĀ Ā Operating altitude test: 40ĖC, 9843 ft. Note: When the ambient operating temperature exceeds 40Ā°C, the access point will shift from 4×4 to 2×2 on bothĀ the 2.4-GHz and 5-GHz radios, uplink Ethernet will downgrade to 1 Gigabit Ethernet, and the USB interface will be disabled. Cisco Catalyst 9115AXE āĀ Ā Nonoperating (storage) temperature: -22Ā° to 158Ā°F (-30Ā° to 70Ā°C) āĀ Ā Nonoperating (storage) altitude test: 25ĖC, 15,000 ft. āĀ Ā Operating temperature: -4Ā° to 122Ā°F (-20Ā° to 50Ā°C) āĀ Ā Operating humidity: 10% to 90% (noncondensing) āĀ Ā Operating altitude test: 40ĖC, 9843 ft. |
| System memory | āĀ Ā 2048 MB DRAM
āĀ Ā 1024 MB flash |
| Available transmit power settings | 2.4 GHz
āĀ Ā 23 dBm (200 mW) āĀ Ā 20 dBm (100 mW) āĀ Ā 17 dBm (50 mW) āĀ Ā 14 dBm (25 mW) āĀ Ā 11 dBm (12.5 mW) āĀ Ā 8 dBm (6.25 mW) āĀ Ā 5 dBm (3.13 mW) āĀ Ā 2 dBm (1.56 mW) āĀ Ā -1dBm (0.79mW) āĀ Ā -4dBm (0.39mW) 5 GHz āĀ Ā 23 dBm (200 mW) āĀ Ā 20 dBm (100 mW) āĀ Ā 17 dBm (50 mW) āĀ Ā 14 dBm (25 mW) āĀ Ā 11 dBm (12.5 mW) āĀ Ā 8 dBm (6.25 mW) āĀ Ā 5 dBm (3.13 mW) āĀ Ā 2 dBm (1.56 mW) āĀ Ā -1dBm (0.79mW) āĀ Ā -4dBm (0.39mW) |
| Frequency band and 20-MHz operating channels | A (A regulatory domain):
āĀ 2.412 to 2.462 GHz; 11 channels āĀ 5.180 to 5.320 GHz; 8 channels āĀ 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz) āĀ 5.745 to 5.825 GHz; 5 channels |
There are no reviews yet.