HPE MSR954 – router – rack-mountable


Tech overview

HPE MSR954 – Router – 4-port switch – GigE – rack-mountable

AED3,999.00

The HPE MSR95x Router Series delivers high-performance, small branch routing in a single, cost-optimized form factor. Featuring integrated routing, switching, wireless, security, and voice with no additional licensing, boost your service delivery while simplifying the management of the corporate WAN. This series is flexible to deploy, with Zero Touch Provisioning and WAN options with LTE connectivity. With Comware v7 and fiber connections, the MSR95x also brings the performance and advanced services available on modular routers, such as IPS and high encryption, to a fixed port form factor.

SKU: JH296A#ABA Category: Tag:
Specifications Details
General
Device Type Router – 4-port switch (integrated)
Enclosure Type Rack-mountable – 1U
Connectivity Technology Wired
Data Link Protocol Ethernet, Fast Ethernet, Gigabit Ethernet
Data Transfer Rate 1 Gbps
Performance
Forwarding Performance Up to 300 Kpps
Encryption Throughput Up to 160 Mbps
Throughput (64-byte packet size) Up to 300 Kpps
Capacity
VPN Tunnels 100
IPv4 Routing Table Entries 10,000
IPv6 Routing Table Entries 5,000
IPv4 Forwarding Table Entries 10,000
IPv6 Forwarding Table Entries 5,000
Network/Transport Protocol TCP/IP, UDP/IP, NTP, IPSec, ARP
Routing Protocol OSPF, EGP, BGP-4, IS-IS, RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, OSPFv3, Bidirectional PIM, MSDP, static IPv4 routing, static IPv6 routing, ECMP, BGP-4+, BGP+
Remote Management Protocol SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, TFTP, CLI
Encryption Algorithm DES, Triple DES, MD5, SHA-1, 128-bit AES, 192-bit AES, 256-bit AES
Authentication Method Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Features
NAT Support Yes
VLAN Support Yes
Port Mirroring Yes
Weighted Random Early Detection (WRED) Yes
sFlow Yes
Spanning Tree Protocol (STP) Support Yes
Rapid Spanning Tree Protocol (RSTP) Support Yes
Multiple Spanning Tree Protocol (MSTP) Support Yes
Tunneling Yes
Access Control List (ACL) Support Yes
Quality of Service (QoS) Yes
Committed Access Rate (CAR) Yes
Unicast Reverse Path Forwarding (URPF) Yes
DHCP Relay Yes
Management Information Base (MIB) Yes
Port Isolation Yes
Packet Storm Protection Yes
Class of Service (CoS) Yes
Loopback Yes
Dynamic Virtual Private Network (DVPN) Yes
Multicast Border Gateway Protocol (MBGP) Yes
Random Early Detection (RED) Yes
Compliant Standards IEEE 802.2, IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, ETSI, EN55022, ICES-003 Class B, FCC Part 68 / CS03 Issue 8, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, FDA, FCC CFR47 Part 15 B, EN 60825-1, AS/NZS 60950, ANSI C63.4, EN 60825-2, CAN/CSA C22.2 No. 60950-1-03, EN 61000-3-2:2006, EN 61000-3-3:1995+A1:2001+A2:2005, EN 61000-4-11:2004, EMC 2004/108/EC, EN 300 386 V1.3.3, AS/NZS CISPR 22 Class B, CAN/CSA-C22.2 No. 60950-1, EN 55024:1998+A1:2001+A2:2003
Processor 1 x Marvell A370 800 MHz
RAM 1 GB DDR3 SDRAM
Flash Memory 256 MB
Expansion/Connectivity
Interfaces 1 x Ethernet 1000 – SFP (mini-GBIC), WAN: 1 x Ethernet 1000 – RJ-45, LAN: 4 x Ethernet 1000 – RJ-45, 2 x USB 2.0
Power
Voltage Required AC 120/230 V
Miscellaneous
Localization English / United States
Software/System Requirements
OS Provided Comware v7
Dimensions & Weight
Width 10.5 in
Depth 6.3 in
Height 1.7 in
Weight 2.2 lbs

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “HPE MSR954 – router – rack-mountable”

There are no reviews yet.