04 3550600 052 7036860

Ashly ne4800MSC Network Enabled Digital Signal Processor with 4-Channel Mic Pre Inputs + 8-Channel AES3 Outputs + CobraNet Card

Add to Wishlist
Key Features
  • 4 Analog Inputs / 8 Analog Outputs
  • 10/100 Ethernet and RS-232 Interfaces
  • 24-Bit A/D-D/A Audio Resolution
  • Extensive DSP via Protea Software Suite
  • Easy and Intuitive User Interface
  • Wordclock I/O
  • Option Bays for Expanded Functionality
  • Windows Compatible

AED17,299.00

Add to Wishlist

Control and protect your sound system with the Ashly ne4800MSC, a network-enabled DSP processor that offers easy setup and control using standard 10/100 Ethernet protocol and Protea ne software. The ne4800MSC features four option bays for expanded functionality. This model includes the 4-channel mic pre input card, 8-channel AES3 output card, and CobraNet card.

The rear panel utilizes Euroblock connectors for easy and secure wiring. Additionally, the 12V Digital Logic I/O uses a 9-pin Euroblock connector that can be assigned to trigger a preset recall or push-to-talk mic function. A 10-pin Euroblock connector is for the 5 VDC Remote Level Control, which allows for up to eight user-defined remote DC level controls.

At a Glance
  • CobraNet, Dante, AES3, Mic input options
  • 10/100 Ethernet and RS-232 computer interface standard
  • Extensive DSP available
  • Easy and intuitive user interface
  • 24-bit A/D–D/A audio resolution
  • 32-bit SHARC DSPs
  • Sample rates of 48 and 96 kHz
  • Hot-plug software control
  • Automatic DHCP network IP configuration
  • Butterworth, Bessel, Linkwitz-Riley, and Notched-Linkwitz-Riley filters
  • FIR filter capability
  • Advanced automatic feedback suppression
  • Wordclock input and output
  • Euroblock connectors for audio, preset recall, DC remote level control and data in/out
  • Remote controls for level, logic I/O and programmable functions
  • Third-party control friendly, input and output metering, multi-level security
Protea DSP Functions and Processors
  • Input source selection
  • Brick wall limiter
  • Compressor
  • Autoleveler controls
  • Ambient noise compensation (output only)
  • Ducking (high/low priority, trigger, filibuster, ducked program)
  • Gate
  • Advanced gate controls
  • Gain
  • EQ:
    • 31-band
    • Parametric 2, 4, 6, or 10 band
    • High/Low Shelf 6/12 dB per octave
    • All-Pass
    • Variable Q HP/LP
    • Notch/Band-Pass
  • Feedback Suppressor (inputs only and 48 kHz sampling rate)
  • Crossover: 2-, 3-, 4-way crossover, and High-Pass/Low-Pass filters
  • Delay:
    • Input time, distance, and temperature at 48 kHz sampling rate
    • Input time, distance, and temperature at 96 kHz sampling rate
  • Audio metering tool
  • Signal Generator Tool (pink noise, white noise, sine wave)
  • Matrix mixer
  • Processors
Programming
All programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne software on a PC platform. Hot-plug software control allows you to plug any function into any channel block, even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network setup time. Multi-level software security with password access assures you a tamperproof audio system.
SKU: NE4800MSC Category: Tag:
Specification Parameter Value
Frequency Response Range 20 Hz to 20 kHz
A>D ±0.1 dB
D>A ±0.25 dB
A>A ±0.25 dB
Dynamic Range Range (Unweighted, 20 Hz to 20 kHz)
A>D >115 dB
D>A >114 dB
A>A >114 dB
THD + N 1 kHz, +20 dBu Analog (-1.0 dBFS)
A>D >0.001%
D>A >0.002%
A>A >0.002%
D>D >0.00001%
Latency (48 kHz) A>D 1.42 ms
D>A 0.90 ms
A>A 2.21 ms
D>D 0.10 ms
Latency (96 kHz) A>D 0.71 ms
D>A 0.45 ms
A>A 1.11 ms
D>D 0.05 ms
Wordclock Input/Output Type 75 Ohms BNC
Lock Range 48 kHz ±4%, 96 kHz ±4%
Input Impedance Selectable 75 Ohms or High Impedance
Input Voltage Range 1.0 to 7.0 Vpp
Output Impedance 75 Ohms
Output Level 5.0 Vpp Nominal, Unterminated
Master Clock Sources Audio Network Yes
Word clock Yes
AES3 Yes
Internal Crystal Clock Yes
Master Clock Modes Prioritized Auto Switching Yes
Manual Yes
Inputs – Analog Line Input Type Active Balanced Euroblock
Input Impedance 20 Kilohms
Maximum Input Level +20 dB
Inputs – AES3 Digital Input Type Transformer Balanced Female XLR
Input Impedance 110 Ohms
Maximum Input Level 7.0 Vpp
Outputs – Analog Output Type Servo-Balanced Euroblock
Output Impedance 20 Ohms
Maximum Output Level +20 dBu
Outputs – AES3 Output Type Transformer Balanced Male XLR
Output Impedance 110 Ohms
Maximum Output Level 5.0 Vpp
Other Connectors Ethernet Port 10/100 Ethernet
RS-232 Port Yes
Remote Level Control Yes
Logic I/O Yes
Data In/Out Ports Yes
On/Off Switch Yes
Environmental Operating Temperature 40 to 120°F / 4 to 49°C (Non-Condensing)
Power Requirements Voltage Range 90 to 240 VAC, 50/60 Hz
Maximum Power 70 W
System Requirements OS Compatibility Windows Vista, 7, 8, 10
Dimensions (WxHxD) 19 x 8.5 x 3.5″ / 483 x 216 x 89 mm
Weight 10.3 lb / 4.7 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ashly ne4800MSC Network Enabled Digital Signal Processor with 4-Channel Mic Pre Inputs + 8-Channel AES3 Outputs + CobraNet Card”

There are no reviews yet.

Related products