04 3550600 052 7036860

Marshall Electronics VSW-2000 4×1 3G-SDI Switcher

Add to Wishlist
  • Four SDI Inputs
  • Supports SD, HD, and 3G-SDI Signals
  • Re-Clocked Output
  • Front Panel Controls
  • Includes IR Remote Control
  • RS-232 Control Enabled

AED1,899.00

Add to Wishlist

Simply switch between four SDI sources with the Marshall Electronics VSW-2000 4×1 3G-SDI Switcher. Four SDI inputs accept SD, HD, and 3G-SDI signals from cameras, recording decks, and other professional equipment and with the push of a button on the front panel, sends one selected signal to the SDI output. The VSW-2000 analyzes incoming signals in order to optimize transmission. The SDI output is re-clocked to ensure that long cable lengths can be used. For convenience, the included infrared remote control can perform input selection functions. Alternatively, the RS-232 interface can be used.

SKU: VSW-2000 Category: Tag:

Marshall Electronics VSW-2000 Specs

SDI Standards
SD, HD, 3G
Protocols: DVB-ASI at 270 Mbps, SMPTE-259M, SMPTE-292M, SMPTE-424M, SMPTE-425M
Video Bandwidth
2.97 Gpbs, 2.97/1.001 Gbps
Re-Clocking
Yes
Cable Equalization
3G: Up to 300′ / 90 m
HD: Up to 500′ / 150 m
SD: Up to 1000′ / 300 m
Inputs
4 x BNC SDI
Outputs
1 x BNC SDI
Eye Pattern Characteristics
Amplitude: Within 800 MV (<10%)
Rise Overshoot: Less than 2% (<10%)
Fall Overshoot: Less than 2% (<10%)
Long Time Jitter: 0.195 UI (<1.0 UI)
Timing Jitter: 0.8 UI (<1.0 UI)
Alignment Jitter: 0.13 UI (<0.2 UI)
Power Supply
5 VDC, 4 A
Power Consumption
5 W (max)
Environmental
Operating Temperature: 32 to 104°F / 0 to 40°C
Storage Temperature: -4 to 140°F/ -20 to 60°C
Humidity: 20 to 90% RH, non-condensing
Dimensions
6.5 x 2.8 x 1.0″ / 165 x 71 x 26 mm
Weight
14.5 oz / 411 g
Packaging Info
Package Weight
2 lb
Box Dimensions (LxWxH)
10.4 x 6.9 x 3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Marshall Electronics VSW-2000 4×1 3G-SDI Switcher”

There are no reviews yet.

Related products