04 3550600
052 7036860
UPS , Power Back up and accessories
APC DIN Rail – Panel Mount UPS with Standard Battery 500VA 120V
- 500VA/325W DIN Rail UPS with hardwire input/output.
- Emergency power off switch for immediate disconnect if needed.
- SmartSlot for optional remote management and monitoring of the UPS and connected load.
AED4,199.00
24V DC UPS designed specifically for industrial automation and controls. This 325W UPS comes with hardwire input/output and can be mounted on a DIN Rail or any control panel. It features temperature-compensated battery charging that helps prolong the battery life.
Overview
| Parameter | Details |
|---|---|
| Lead Time | Usually in Stock |
| Main Run Time for Load | 7 min 22 s (at 325 W) |
| Load Range | 33 – 325 W |
| Max Capacity Used | 100% |
| Product Type | Uninterruptible Power Supply (UPS) |
Batteries & Runtime
| Parameter | Details |
|---|---|
| Battery Type | Lead-Acid battery |
| Extendable Run Time | 0 |
| Included Battery Modules | 1 |
| Battery Slots Empty | 1 |
| Typical Recharge Time | 2 hours |
| RBC Quantity | 1 |
| Battery Life | 3 – 5 years |
| Replacement Battery | APCRBC135 |
| Battery Charge Power | 60 W rated |
| Run Time | View Runtime Graph |
General
| Parameter | Details |
|---|---|
| Provided Equipment | CD with software, Documentation CD, Installation guide, Smart UPS signalling RS-232 cable |
| Power Module Slots (Filled/Free) | 0 / 0 |
| Redundant | No |
Physical
| Parameter | Details |
|---|---|
| Height | 5.83 in (14.8 cm) |
| Width | 14.25 in (36.2 cm) |
| Depth | 6.73 in (17.1 cm) |
| Weight | 28.35 lb (12.86 kg) |
| Mounting Preference | No preference |
| Mounting Mode | Not rack-mountable |
| Two Post Mountable | 0 |
| USB Compatible | No |
Input
| Parameter | Details |
|---|---|
| Main Input Voltage | 120 V |
| Input Voltage Range | 75 – 154 V adjustable; 82 – 144 V |
| Input Connectors | 1 Hard Wire 3-wire (1PH+N+G) |
| Input Frequency | 50/60 Hz ± 3 Hz (auto-sensing) |
Output
| Parameter | Details |
|---|---|
| Main Output Voltage | 120 V |
| Power Rating | 325 W / 500 VA |
| Max Configurable Power | 325 W / 500 VA |
| Output Connector Type | Hard Wire 3-wire (H N + E) 1 |
| Harmonic Distortion | < 5% |
| Topology | Line Interactive |
| Waveform Type | Sine wave |
| Efficiency (at Full Load) | 94% |
| Output Frequency (Sync to Mains) | 47–53 Hz (50 Hz), 57–63 Hz (60 Hz) |
Conformance
| Parameter | Details |
|---|---|
| Product Certifications | UL Recognized |
Environmental
| Parameter | Details |
|---|---|
| Acoustic Level | 55 dBA |
| Online Thermal Dissipation | 90 Btu/h |
| Operating Altitude | 0 – 10,000 ft |
| Operating Temperature | 32 – 104 °F (0 – 40 °C) |
| Storage Temperature | 5 – 113 °F (-15 – 45 °C) |
| Storage Altitude | 0 – 50,000 ft (0 – 15,240 m) |
| IP Degree of Protection | IP20 |
| Operating Relative Humidity | 0 – 95% |
| Storage Relative Humidity | 0 – 95% |
Based on 0 reviews
Be the first to review “APC DIN Rail – Panel Mount UPS with Standard Battery 500VA 120V”
Related products
-
UPS , Power Back up and accessories
APC SRTRK2 – Smart-UPS SRT 19 INCH Rail Kit for Smart-UPS SRT 5KVA, 6KVA, 8KVA, 10kVA UPS
UPS , Power Back up and accessoriesAPC SRTRK2 – Smart-UPS SRT 19 INCH Rail Kit for Smart-UPS SRT 5KVA, 6KVA, 8KVA, 10kVA UPS
- Quick installation The iBusway for Data Center solution uses bolted snap fit hangers and plug in joint connections, which simplify installation and eliminate the need for expensive special tools
- Includes: Installation guide, Mounting hardware
- Automatic internal bypass
- Scalable runtime
- Intelligent battery management
SKU: APC SRTRK2
There are no reviews yet.