Seagate Barracuda 7200.8 250GB 7.2K SATA Hard Drive

Availability:

30 in stock


AED559.00

30 in stock

Seagate Barracuda 7200.8 250GB 7.2K SATA Hard Drive

Capacity: 250GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 65
Average Seek Time (read/write ms): 8 / 9
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 8MB

 

Detailed Description
 

These drives provide the following key features:

•7,200 RPM spindle speed.

•8 Mbyte buffer

•High instantaneous (burst) data-transfer rates (up to 150 Mbytes per second).

•Tunneling Giant Magnetoresistive (TGMR) recording heads and EPRML TECHNOLOGY, provide the drives with increased areal density.

•State-of-the-art cache and on-the-fly error-correction algorithms.

•Native Command Queueing with command ordering to increase performance in demanding applications.

•Full-track multiple-SECTOR transfer capability without local processor intervention.

•Quiet operation.

•300 Gs nonoperating shock.

•SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.

•Support for S.M.A.R.T. drive monitoring and reporting.

•Supports latching SATA cables and connectors.

Compatibility

 
Specifications
 

Drive specification

ST3250823AS

ST3250623AS

ST3200826AS

Formatted Gbytes (512 bytes/sector)*

250

200

Guaranteed SECTORS

488,397,168

390,721,968

Bytes per SECTOR

512

Default SECTORS per track

63

Default read/write heads

16

Default cylinders

16,383

Recording density in BPI (bits/inch max)

763,000

Track density TPI (tracks/inch avg)

120,000

Areal density (Mbits/inch2 avg)

91,560

Spindle speed (RPM)

7,200

Internal data transfer rate (Mbytes/sec max)

95

Sustained transfer rate OD (Mbytes/sec)

65

I/O data transfer rate (Mbytes/sec max)

150

ATA data-transfer modes supported

PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–6

SATA data-transfer modes supported

1.5 Gbits/sec

Cache buffer

8 Mbytes

16 Mbytes

8 Mbytes

Height (max)

26.11 mm (1.028 inches)

Width (max)

101.85 mm (4.010 inches)

Length (max)

146.99 mm (5.787 inches)

Weight (max) grams / lb.

635 / 1.39

Average latency (msec)

4.16

Power-on to ready (typical)

10 sec

Standby to ready (typical)

10 sec

Track-to-track seek time (msec typical)

0.8 (read), 1.0 (write)

Average seek, read (msec typical)

8.0

Average seek, write (msec typical)

9.0

Startup current (typical) 12V (peak)

2.8 amps

Seek power (typical) watts

9.9

Operating power (typical) watts

9.2

Idle mode (typical) watts

7.2

Standby mode (typical) watts

1.2

Sleep mode

1.2

Voltage tolerance

(including noise)

5V ± 5%

12V ± 10%

Ambient temperature

0° to 60°C (op.)

–40° to 70°C (nonop.)

Temperature gradient

(°C per hour max)

20°C (operating)

30°C (nonoperating)

Relative humidity

5% to 90% (operating)

5% to 95% (nonoperating)

Relative humidity gradient

30% per hour max

Wet bulb temperature(°C max)

37.7 (operating)

40.0 (nonoperating)

Altitude, operating

–60.96 m to 3,048 m

(–200 ft to 10,000+ ft)

Altitude, nonoperating (meters below mean sea level, max)

–60.96 m to 12,192 m

(–200 ft to 40,000+ ft)

Shock, operating (max at 2 msec)

63 Gs

Shock, nonoperating (max at 2 msec)

300 Gs

Vibration, operating

5–22 Hz: Limited displacement

23–350 Hz: 0.5 G acceleration

Vibration, nonoperating

5–22 Hz: Limited displacement

23–350 Hz: 5 Gs acceleration

Drive acoustics, sound power (bels)

Idle**

2.8 (typical)

3.4 (max)

Performance seek

3.7 (typical)3.9 (max)

Nonrecoverable read errors

1 per 1014 bits read

Annualized Failure Rate (AFR)

0.34%

Service life

5 Years

Contact start-stop cycles(25°C, 50% relative humidity)

50,000

Supports Hotplug operation per SATA II specification

Yes

 

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Seagate Barracuda 7200.8 250GB 7.2K SATA Hard Drive”

There are no reviews yet.