Compaq 213228-001 100MBps 7200 RPM IDE Ultra ATA Hard Disk Drive
| Weight | 0.62 kg |
|---|
| Specifications | |
|---|---|
| Model Number | 213228-001 |
| Alt Model Number | WD100BB |
| Recommended Setup Parameters | |
| Cylinders | 16383 |
| Heads | 16 |
| Sectors / Track | 63 |
| Landing Zone | 16383 |
| WPC | 16383 |
| Jumper Setting Information | Ten Pin Drive |
| Physical Specifications | |
| Formatted Capacity | 10,005 MB / 10GB |
| Interface | 40-pin EIDE |
| Actuator Type | Rorary Voice Coil |
| Number of Platters | 1 |
| Data Surfaces | 1 |
| Number of Heads | 1 |
| Bytes Per Sector | 512 |
| User Sectors Per Drive | 19,541,088 |
| Servo Type | Embedded |
| Recording Method | Rate 16/17 PRML |
| ECC | Reed Solomon |
| Head Park | Automatic |
| Performance Specifications | |
| Average Seek (Read) | 8.9 ms (typical), 18 ms (maximum) |
| Average Seek (Write) | 10.9 ms (typical), 20 ms (maximum) |
| Track to Track Seek | 2.0 ms (typical), 5 ms (maximum) |
| Full Stroke Seek | 21 ms (typical), 28 ms (maximum) |
| Index Pulse Period | 8.3 (nominal) |
| Average Latency | 4.2 ms (nominal) |
| Rotational Speed | 7200 RPM (nominal) |
| Controller Overhead | 0.3 ms average |
| Transfer Rate (Buffer to Host) | 100 MB/s (Mode 5 Ultra ATA) 66.6 MB/s (Mode 4 Ultra ATA) 33.3 MB/s (Mode 2 Ultra ATA) 16.6 MB/s (Mode 4 PIO) 16.6 MB/s (Mode 2 multi-word DMA) |
| Transfer Rate (Buffer to Disk) | 244 Mbits/s minimum 400 Mbits/s maximum |
| Interleave | 1:1 |
| Buffer Size | 2 MB |
| Error Rate (Non-Recoverable) | <1 in 10E14 bits read |
| Spindle Start Time – From Power-on to Drive Ready |
4.5s typical, 7s maximum |
| Contact Start/Stop Cycles (CSS) | 40,000 minimum |
| Physical Dimensions | |
| Height | 1.028 inch / 26.1 mm |
| Length | 5.787 inches / 147.0 mm |
| Width | 4.00 inches / 101.6 mm |
| Weight | 1.4 lbs / 0.62 kg |
04 3550600
052 7036860
info@techsouq.com




There are no reviews yet.