AIR-AP2802I-E-K9C – Cisco Aironet 2802i Access Point

802.11ac Wave 2 AP w/CleanAir, 4×4:3, Internal Antenna, E Regulatory Domain, Configurable

AED10,899.00

AIR-AP2802I-E-K9C Overview

Part Number	AIR-AP2802I-E-K9C
Description	802.11ac Wave 2 AP w/CleanAir, 4×4:3, Internal Antenna, E Regulatory Domain, Configurable
Features	4×4 MU-MIMO with three spatial streams MRC 802.11ac beamforming 20-, 40-, 80, 160-MHz channels PHY data rates up to 5.2 Gbps Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support
Interfaces	2×100/1000BASE-T autosensing (RJ-45) Management console port (RJ-45) USB 2.0 (enabled via future software)
Dimensions (W x L x H)	8.66 x 8.68 x 2.17 in.
Weight	3.53 lb (1.6 kg

SKU: AIR-AP2802I-E-K9C Category: Wireless Access Points AP Tag: AIR-AP2802I-E-K9C

AIR-AP2802I-E-K9C Specification
General
Device Type	Wireless access point
Ruggedized Design	Indoor
Width	8.7 in
Depth	8.7 in
Height	2.2 in
Networking
Form Factor	External
Connectivity Technology	Wireless
Data Transfer Rate	5.2 Gbps
Data Link Protocol	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Frequency Band	2.4 GHz, 5 GHz
Capacity	Spatial streams: 3
Status Indicators	Boot state, error, status
Features	Auto-sensing per device, DFS support, roaming function, CleanAir technology, Link Aggregation Control Protocol (LACP), Maximum Ratio Combining (MRC), 4T4R MIMO technology, cyclic shift diversity (CSD), MU-MIMO technology, beamforming technology, packet aggregation A-MPDU, packet aggregation A-MSDU, Cross AP Noise Reduction, MIMO equalization, ClientLink 4.0 technology, High Density Experience (HDX)
Compliant Standards	IEEE 802.11b, IEEE 802.11a, IEEE 802.3ad (LACP), IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac
Antenna
Antenna	Internal
Expansion / Connectivity
Interfaces	2 x 1000Base-T – RJ-45 ¦ 1 x console – RJ-45
Manufacturer Warranty
Service & Support	Limited warranty – advance hardware replacement – lifetime – response time: 10 days

0.0 overall

There are no reviews yet.