04 3550600 052 7036860

AJA Dante AV 12G-SDI/HDMI 4K Transmitter

Add to Wishlist
Key Features
  • Dante AV Ultra Signals up to UHD 4K
  • 1 x 12G-SDI and 1 x HDMI 2.0 Input
  • Gigabit Ethernet Ports, PoE+
  • HDCP 2.2 Support, RS-422 Serial Control
  • 2 x USB-A Ports, Mini-USB Host Port
  • 1 x 3.5mm IR Input, 1 x 3.5mm IR Output
  • Dante Controller Software Compatible
  • Low Latency, PCM Digital Audio

د.إ8,799.00

Add to Wishlist

Use the AJA Dante AV 12G-SDI/HDMI 4K Transmitter to deliver Dante AV Ultra signals up to UHD 4K via your Ethernet network. In combination with the separately available receiver, the transmitter can operate in your conference room, lecture hall, or event space thanks to its modular system design. Connect the unit to your Dante AV network using the primary Ethernet port. The transmitter features one 12G-SDI input and one HDMI 2.0 input capable of supporting signals up to 4K60. 8-channel, 48 kHz embedded PCM audio from those sources can be distributed across the network via TCP/IP protocols.

The transmitter is compatible with Dante Controller software, which allows you to route the video, audio, KVM, VISCA, and IR connections via your network to the destination of your choice. Two USB-A ports connect peripheral devices, while a mini-USB port inputs your Windows or macOS computer. IR communication is facilitated using the 3.5mm input and output ports and the included emitter and receiver units. The transmitter supports HDCP 2.2 and has a DB-9 port for RS-422 serial control. Five LED indicators on the front panel of the unit display power, codec, system, sync, and HDCP status.

Dante AV Ultra Ecosystem
Dante AV is a 1 GigE networking solution that delivers up to UHD 4K60 video at a 0.5 frame latency over an IP connection. It features a JPEG 2000 codec for high-quality visuals with network efficiency. The codec supports lossy and lossless coding and has up to 16384 components. Easily integrate Dante-enabled audio products into your setup for a complete AV-over-IP ecosystem.
Dante Controller Software
Use the Dante Controller software with your macOS or Windows computer to set up your video and audio signal routing between Dante devices. Control the video and audio connections and move them over in real time to an Ethernet network. Take the transmitter’s embedded audio and configure it as a separate audio source channel on the network using the Dante Via. The separately available Dante Virtual Soundcard can emulate a physical PC or Mac soundcard via the Dante network.
Flexible Power Options
The primary Ethernet port supports PoE+ for reduced cable runs. Included with the transmitter unit is a power adapter capable of converting 100-240 VAC at 50/60 Hz to 12 VDC. A DIN 4-pin power input accepts the power adapter cable.
VESA Monitor Formats
The Dante AV transmitter supports various VESA formats from WUXGA to VGA to allow efficient monitoring of your networked connections. An RCA analog audio port outputs audio signals to your monitor.
SKU: DANTE-AV-4K-TNA Category: Tag:
Inputs / Outputs
Video Inputs
1x HDMI (2.0) Female
1x BNC (12G-SDI) Female
Audio Inputs
No
Audio Outputs
1x 2RCA Analog Female
Other I/O
1x BNC Reference Output
1x RJ45 LAN, PoE
1x RJ45 LAN
1x DE-9/DB-9 RS-422 Input
2x USB-A
1x Mini-USB Input
1x 1/8″ / 3.5 mm IR Input
1x 1/8″ / 3.5 mm IR Output
Expansion Slots
No
Latency
0.5 Frame
Format Support
Input Video Format
SDI (10-Bit 4:2:2 YCC)
DCI 4K 23.98/24/25/29.97/30/50/59.94/60 fps
UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps
DCI 2K 23.98/24/25/29.97/30/50/59.94/60 fps
1080p 23.98/24/25/29.97/30/50/59.94/60 fps
1080PsF 23.98/24/25/29.97/30 fps
720p 50/59.94/60 fps
HDMI (8/10/12-Bit 4:4:4 RGB, YCC)
DCI 4K 23.98/24/25/29.97/30/50/59.94/60 fps
UHD 4K 23.98/24/25/29.97/30/50/59.94/60 fps
DCI 2K 23.98/24/25/29.97/30/50/59.94/60 fps
1080p 23.98/24/25/29.97/30/50/59.94/60 fps
720p 50/59.94/60 fps
HDMI / SDI (8-Bit 4:4:4)
WUXGA (1920 x 1200) 60 fps
UXGA (1600 x 1200) 60 fps
SXVGA (1280 x 1024) 60 fps
XGA (1024 x 768) 60 fps
SVGA (800 x 600) 60 fps
VGA (640 x 480) 60 fps
Input Audio Format
LPCM (Linear Pulse-Code Modulation): 48 kHz / 24-Bit
Embedded Audio
SDI Input: 8-Channel
HDMI Input: 8-Channel
Standards
Video Standard Compliance
SMPTE 292M/424M/425M-A/ST-2081/ST-2082
HDCP Support
Yes, Version 2.2
EDID Support
No
HDR Support
No
Hardware
Tally Light
Yes
OS Compatibility
Windows
macOS
Power
Power I/O
1x DIN 4-Pin (12 VDC ) Input
PoE Support
PoE+ 802.3at
Power Consumption
Power Supply: 100 to 240 VAC at 1.5 A
Environmental
Operating Temperature
32 to 104°F / 0 to 40°C
Storage Temperature
-40 to 140°F / -40 to 60°C
Operating Humidity
10 to 90% ()
General
Certifications
FCC, CE
Dimensions
8.74 x 7.09 x 1.65″ / 22.2 x 18.01 x 4.19 cm
Weight
3.1 lb / 1.4 kg
Packaging Info
Package Weight
3.62 lb
Box Dimensions (LxWxH)
10.2 x 10.1 x 4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AJA Dante AV 12G-SDI/HDMI 4K Transmitter”

There are no reviews yet.

Related products