Altronix Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or CAT5e or higher cable in a PoE(+) compliant format. Pace1PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to Pace1PTM transceiver which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.
Network Adapters
Altronix PACE1PRMT – transmitter and receiver – network/power extender – 10Mb LAN, 100Mb LAN
Altronix PACE1PRMT – Transmitter and receiver – network/power extender – 100Mb LAN – 10Base-T, 100Base-TX – up to 1640 ft
1,699.00 د.إ
General |
---|
Device Type | Network/power extender |
Networking |
Connectivity Technology | Wired |
Cabling Type | 10Base-T, 100Base-TX |
Data Link Protocol | 10Mb LAN, 100Mb LAN |
Data Transfer Rate | 100 Mbps |
Max Transfer Distance | 1640 ft |
Status Indicators | PoE, link/activity |
Features | Auto-negotiation, half duplex mode, full duplex mode |
Compliant Standards | IEEE 802.3af, IEEE 802.3at |
Expansion / Connectivity |
Interfaces | 1 x Ethernet 10Base-T/100Base-TX – RJ-45 female, 1 x network (PoE input) – RJ-45 |
Miscellaneous |
Compliant Standards | Plug and Play, UL, UL 60950-1 |
Power |
Power Over Ethernet (PoE) | PoE+ |
Dimensions & Weight |
Width | 3.5 in |
Depth | 3.5 in |
Height | 1 in |
Weight | 6.35 oz |
Dimensions & Weight (Shipping) |
Shipping Weight | 15.87 oz |
Environmental Parameters |
Min Operating Temperature | -4 °F |
Max Operating Temperature | 120.2 °F |
Humidity Range Operating | 0 – 85% (non-condensing) |
There are no reviews yet.