04 3550600 052 7036860

APC SUVTP10KH4B4S Smart-UPS VT 10kVA 400V with 4 Battery Modules, Start-Up 5X8, Internal Maintenance Bypass, Parallel Capable

Add to Wishlist

د.إ39,999.00

Add to Wishlist

APC SUVTP10KH4B4S Smart-UPS VT 10kVA 400V with 4 Battery Modules, Start-Up 5X8, Internal Maintenance Bypass, Parallel Capable

SUVTP10KH4B4S Features

APC Smart-UPS VT 10kVA 400V w/4 Batt Mod, Start-Up 5X8, Int Maint Bypass, Parallel Capable
Effective 10-40kVA 3 phase UPS power protection against downtime and data loss for mission critical applications.
Includes: Battery modules ship installed, Bolt Down Brackets, CD with software, Installation Guide, Network Management Card, Power modules ship installed, Start up included, User Manual
  • Parallel-capacity capable
    Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
  • Parallel-redundant capable
    Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy
SKU: SUVTP10KH4B4S Category: Tags: , , , ,

Output

Output power capacity 8.0kWatts / 10.0kVA
Max Configurable Power (Watts) 8.0kWatts / 10.0kVA
Nominal Output Voltage 400V 3PH
Output Voltage Note Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load 95.7 %
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 – 53 Hz for 50 Hz nominal
Output Frequency (not synced) 50Hz +/- 0.1% for 50Hz nominal
Other Output Voltages 380, 415
Load Crest Factor 3 : 1
Topology Double Conversion Online
Waveform type Sine wave
Maximum Output Current 16
Bypass Built-in Maintenance Bypass, Built-in Static Bypass

Input

Nominal Input Voltage 400V 3PH
Input frequency 40 – 70 Hz (auto sensing)
Input Connections Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations 304 – 477V
Efficiency at Full Load 95.7 %
Other Input Voltages 380, 415
Maximum Input Current 14.0A
Input Power Factor at Full Load 0.98

Batteries & Runtime

Battery type VRLA
Included Battery Modules 4
Typical recharge time 5hour(s)
Nominal Battery Voltage +/-192 V (split battery referenced to neutral)
Expected Battery Life (years) 3 – 5
RBC Quantity 4
Extendable Run Time 1
Battery Volt-Amp-Hour Capacity 9899
Extended Run Options

APC-Smart-UPS-VT-10kVA-400V-w-4-Batt-Mod-Start-Up-5X8-Int-Maint-Bypass-Parallel-Capable
End of Discharge Battery Voltage +/-154 V
Runtime View Runtime Graph

View Runtime Chart
Efficiency

View Efficiency Graph

Communications & Management

Interface Port(s) DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards

AP9631
Control panel

Multi-function LCD status and control console
Audible Alarm

Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)

Yes

Physical

Maximum Height 1490MM, 149.0CM
Maximum Width 523MM, 52.3CM
Maximum Depth 842MM, 84.2CM
Net Weight 599.09KG
Shipping weight 630.0KG
Shipping Height 1643MM, 164.3CM
Shipping Width 650MM, 65.0CM
Shipping Depth 1062MM, 106.2CM
Color Black
Units per Pallet 1.0

Environmental

Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 95 %
Operating Elevation 0-999.9meters
Storage Temperature -50 – 40 °C
Storage Relative Humidity 0 – 95 %
Storage Elevation 0-15000meters
Audible noise at 1 meter from surface of unit 51.3dBA
Online thermal dissipation 1774.0BTU/hr
Protection Class IP 20

Conformance

Approvals

C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, RCM, VFI-SS-111
Standard warranty

1 year repair or replace, Start-Up Service

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “APC SUVTP10KH4B4S Smart-UPS VT 10kVA 400V with 4 Battery Modules, Start-Up 5X8, Internal Maintenance Bypass, Parallel Capable”

There are no reviews yet.

Related products