04 3550600 052 7036860

AVPro Edge MXNet 1G Encoder/Transmitter Device

Add to Wishlist
Key Features
  • Encode HDMI Video to Fiber/IP Output
  • Requires an L3 Multicast/MXNet Switch
  • Supports up to 4K60 4:4:4 Resolution
  • Works with AC-MXNET-1G-D Decoder
  • 1 GB/s Maximum Data Rate
  • Analog Stereo Audio De-Embedded Output
  • PoE (Power-over-Ethernet) Support
  • RS-232 & IR Pass-Through
  • Dolby & DTS, HDR/HLG Support
  • Near Zero Latency

5,499.00 د.إ

Add to Wishlist

Add the MXNet 1G Encoder/Transmitter Device from AVPro Edge to your network to send IP video for video walls, digital signage, or high resolution monitoring. The encoder inputs up to 4K60 4:4:4 video from the MXNet switch or a multicast-capable L3 switch over Gigabit Ethernet or extend the distance via an optional fiber module in the SFP slot, and it outputs HDMI video up to 4K60 to a display for local monitoring. The transmitter encodes HDMI video and transmits it with near zero latency with a maximum 1 GB/s data rate, outputting visually lossless video.

The transmitter/encoder fits right into the MXNet device ecosystem, and it can be configured and managed by the MXNet MENTOR control tool. Other features include EDID support, HDR and Dolby Vision support, DTS and Dolby audio support, a data status display, RS-232 and IR signaling pass-through support, USB and KVM support, and you can even turn off all the LED status lights on the unit so it can be installed discreetly.

Key Features
JPEG 2000
JPEG 2000 is the essential video encoding choice when picture quality is critical. JPEG 2000 supports progressive decoding and delivers both lossy and lossless compression within a code stream and it supports genlock, so that the frames of a video source are synced to all Decoders, resulting in tear-free video walls. It also enables the handling of color-space information, 10-bit color, and it supports interactivity in networked applications.
Data Window
The Data Window displays the IP address and the MAC address, or you can modify the name, using MXNet Mentor to display custom names such as LG-OLED-TV, WEST-BAR-12, TW-PROJ-3, etc. You have up to 12 characters available to use for your custom name.
Full External Light Control
When you install an decoder in a discreet location, you have the option to turn off all the lights on the device, including network link lights and the Data Window OLED light. This way, the end-user will never even know it’s there.
Control Signal Routing
Both RS-232 and IR signals can be direct routed from the AC-MXNET-1G-E encoder. When you route these signals through a network switch, you can specify which decoder to send these control signals.
USB and KVM Support
Each decoder unit has two USB ports, and you may also connect a USB hub if needed to expand the number of USB ports. Connect and route any USB signals back to the encoder host. Use the MXNet Mentor software to specify the host encoder, and the upstream USB device connected the selected decoder.
SKU: AC-MXNET-1G-E Category: Tag:
Inputs / Outputs
Video Inputs
1x HDMI (DVI/HDMI 2.0b) Female
Audio Inputs
1x 1/8″ / 3.5 mm TRS Stereo Analog Female
Video Outputs
1x RJ45 Female
Audio Outputs
1x Block 5-Pin Stereo Analog Female
Other I/O
3x 1/8″ / 3.5 mm IR Input/Output
1x Block 5-Pin RS-232 Input/Output
1x USB-B Input
1x Micro-USB Firmware Input
Expansion Slots
1x SFP Slot
Format Support
Input Video Format
HDMI (4:4:4/4:2:2)
DCI 4K at 30/60 fps
RJ45 (4:2:0)
DCI 4K at 60 fps
RJ45 (10/12-Bit 4:4:4/4:2:2/4:2:0)
1080p
Output Video Format
HDMI / RJ45 (10/12-Bit 4:4:4/4:2:2)
DCI 4K at 30/60 fps
HDMI / RJ45 (10/12-Bit 4:2:0)
DCI 4K at 60 fps
HDMI / RJ45 (16-Bit 4:4:4/4:2:2/4:2:0)
1080p
Output Audio Format
Analog
LPCM (Linear Pulse-Code Modulation)
Standards
EDID Support
Manual Control
HDR Support
Not Specified by Manufacturer
DTS Compatibility
DTS, DTS-ES, DTS-HD High Resolution
Dolby Compatibility
Dolby Digital, Dolby Digital Plus
Hardware
Wireless
No
Power
Power I/O
1x Barrel (12 VDC at 2 A) Input
PoE Support
PoE 802.3af
Power Consumption
Power Supply: 120 to 240 VAC at 0.8 A (6.5 W)
Environmental
Operating Temperature
23 to 123°F / -5 to 51°C
Storage Temperature
-4 to 140°F / -20 to 60°C
Operating Humidity
5 to 90%
General
Certifications
CE, FCC, UL
Dimensions
7.9 x 4.1 x 0.8″ / 200 x 104 x 20 mm
Weight
1.2 lb / 550 g

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AVPro Edge MXNet 1G Encoder/Transmitter Device”

There are no reviews yet.

Related products