04 3550600 052 7036860

AVPro Edge MXNet 1G Evolution II Weatherproof Decoder

Add to Wishlist
Key Features
  • Weatherproof Design with Nano-Coating
  • Sealed & Tested Chassis, IP68 Rating
  • 1G Decoder/Receiving Device, HDMI 2.0
  • Supports up to DCI 4K60 4:4:4 Video
  • Supports HDR 10, HLG & Dolby Vision
  • New ASIC for Improved Image Fidelity
  • Requires an L3 Multicast/MXNet Switch
  • Uses Cat 6A or SFP Fiber for Long Runs
  • Uses Optimized JPEG 2000 Codec
  • Compatible with NetGear Switches

د.إ9,999.00

Add to Wishlist

The MXNet 1G Evolution II Weatherproof Decoder from AVPro Edge receives and decodes video and audio signals at resolutions up to DCI 4K60 4:4:4, along with control, power, and HDR metadata. This decoder features a sealed and tested IP68 weatherproof design with a Sealoc nano-coating. It supports HDMI 2.0, HDR10, HLG, and Dolby Vision up to 30 Hz and is designed for use with an MXNet switch or a multicast capable L3 switch and with Cat 6A cable or with SFP fiber for longer runs. It features a new AVPro Edge ASIC (application-specific integrated circuit) for enhanced video processing and support for audio formats like Dolby Atmos and DTS:X for IMAX Enhanced soundtracks.

Note:

The AC-MXNET-1G-DV2 may coexist alongside 1st-generation MXNet encoders and decoders within previously installed or pending systems; however, they are required to be used exclusively in EVO II transmitter-to-EVO II decoder(s) pairings only.
Weatherproofed Design
  • The Sealoc nano-coating creates a durable, waterproof protective layer.
  • Protects delicate electronics against the elements.
  • Guards against water, moisture, humidity, dust, salt air, and corrosion.
  • The sealed chassis is rated IP68.
AVPro Edge ASIC
The AVPro Edge ASIC (application-specific integrated circuit) substantially improves the fidelity of the decoded image.
JPEG 2000
  • The JPEG 2000 encoding used by MXNet components optimizes compression efficiency for applications with limited bandwidth. It provides both lossless or lossy compression and parsable code streams.
  • Genlock support for syncing a video source to decoders comprising a video wall for a tear-free screen appearance.
Up to UHD 4K60 Support
  • This Evolution II Weatherproof Decoder supports video resolutions up to DCI 4K60 4:4:4/4:2:2 12-bit signals using limited, ultralight ICT compression.
  • Supports up to DCI 4K60 4:4:4 8-bit and UHD 4K60 4:2:2 12-bit uncompressed video signals.
  • Supports HDR 10, HLG, and Dolby Vision up to DCI 4K30.
High-Bitrate Audio Support
  • The Evolution II Weatherproof Decoder supports multichannel, high-bitrate audio.
  • Supports audio formats like Dolby Atmos and DTS-X for IMAX Enhanced soundtracks and more.
OLED Window
  • The front-panel OLED screen displays critical information, making setup and troubleshooting easier.
  • The data window displays the IP address and the MAC address or can be modified to display up to 12-character custom names.
NetGear Support
  • Install the AVPro Edge Profile for seamless compatibility with NetGear switchers.
SKU: AC-MXNET-1G-DV2-SEA Category: Tag:
nputs / Outputs
Video Inputs
1x RJ45 (DVI) Female
1x LC Fiber (DVI) Female
Audio Inputs
No
Video Outputs
1x HDMI (2.0b) Female
Audio Outputs
1x 1/8″ / 3.5 mm TRS Stereo Analog Female
Other I/O
2x 1/8″ / 3.5 mm IR Input
1x 1/8″ / 3.5 mm IR Output
1x Block 3-Pin RS-232
2x USB-A
1x USB-C Service
Expansion Slots
No
Format Support
Input Video Format
Fiber / RJ45 (8-Bit 4:4:4 RGB)
DCI 4K at 60 fps
Fiber / RJ45 (10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC)
UHD 4K at 24/30/50/60 fps
Fiber / RJ45 (12/16-Bit 4:2:2/4:2:0 RGB, YCC)
1080p at 50/60 fps
720p at 50/60 fps
Output Video Format
HDMI (8-Bit 4:4:4 RGB)
DCI 4K at 60 fps
HDMI (10/12-Bit 4:4:4/4:2:2/4:2:0 RGB, YCC)
UHD 4K at 24/30/50/60 fps
HDMI (16-Bit 4:2:2/4:2:0 RGB, YCC)
1080p at 50/60 fps
720p at 50/60 fps
Embedded Audio
HDMI/LAN (RJ45)
Standards
EDID Support
No
HDR Support
,
DTS Compatibility
DTS, DTS-ES, DTS-HD High Resolution, DTS-HD Master Audio
Dolby Compatibility
Dolby Atmos, Dolby Digital, Dolby Digital Plus
Hardware
Tally Light
Yes
Wireless
No
Power
Power I/O
1x IEC C14 (120 to 240 VAC at 0.8 A) Input
1x Barrel (12 VDC at 2 A) Output
PoE Support
PoE 802.3af
Power Consumption
9.5 W
Environmental
Operating Temperature
23 to 125°F / -5 to 51°C
Storage Temperature
-4 to 140°F / -20 to 60°C
Operating Humidity
5 to 90% ()
General
Certifications
IECIP68, CE, FCC, UL
Dimensions
7.9 x 4.7 x 0.8″ / 200 x 120 x 20 mm
Weight
1.2 lb / 550 g

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AVPro Edge MXNet 1G Evolution II Weatherproof Decoder”

There are no reviews yet.

Related products