04 3550600 052 7036860

Blonder Tongue Clearview Flex QAM Flexible Transmodulator – 32 IP/ASI In/Cherry Pick/IP/ASI/4 QAM Out

Add to Wishlist
  • Multiplexes SPTS to MPTS via IP and/or QAM outputs; MPEG-2 or H.264/H.265
  • De-multiplexes MPTS to SPTS; MPEG-2 or H.264/H.265
  • Can pass-thru or modify PSIP information such as major/minor channels, short names, and corresponding program IDs (PIDs)
  • Allows for null packet insertions or deletion supporting Constant Bit Rate (CBR)
  • UDP Unicast or Multicast support

د.إ10,399.00

Add to Wishlist

The Blonder Tongue Clearview Flex QAM combines IP grooming and edge QAM technology into one integrated package. By providing a wide-range of functionality in a compact solution, the Flex QAM brings remarkable cost savings. The unit can convert ASI to IP video streams, as well as Mux and Demux ASI and IP streams.

The Clearview Flex QAM can multiplex a multitude of IP Video sources to create up to 4 complete QAM transport stream outputs per 1 RU with a capacity of over 155 Megabits per second, including full SI and PSIP creation so that digital televisions can scan, recognize and display custom channel lineups designed by the integrator or installer specific to a property. Sources can include IP Cameras, local video sources, service operator content, or off-air sources from their Aircasterā„¢ AQT8

  • Features:

    • Multiplexes SPTS to MPTS via IP and/or QAM outputs; MPEG-2 or H.264/H.265
    • De-multiplexes MPTS to SPTS; MPEG-2 or H.264/H.265
    • Can pass-thru or modify PSIP information such as major/minor channels, short names, and corresponding program IDs (PIDs)
    • Allows for null packet insertions or deletion supporting Constant Bit Rate (CBR)
    • UDP Unicast or Multicast support
    • Supports UDP delivery of IP packets
    • Supports three audio formats: AC3, AAC and MPEG-1 Layer 2, E-AC3
SKU: BT-CLEARVFLEXQAM Category: Tag:

  • Specifications:

    • Input
    • IP Mode
      Connector: 1x RJ45 (Rear Panel)
      Standard: 1000Base-T Ethernet (GigE)
      UDP/RTP: Supported (User-Selectable)
      Protocols Supported: IGMPv2/IGMPv3
    • Stream Portfolio
      Standard: ISO / IEC 13818-1 Systems
      TS Packet Length: 188 bytes
      Sync Byte: 0x47
      SPTS and MPTS: Supported
      Muxing: 32 SPTS to 4 MPTS
      Bit Rate: Constant
    • ASI
      Connector: 4x BNC Female
      Rates: DVB-ASI; EN 50083-9

      Output – QAM

    • # of Output Modules: 1x Quad-QAM (total of 4 QAM channels)
    • Connector: 1x “F” Female (for combined output)
    • Modulation: QAM 16, 32, 64, 128, and 256
    • Standards: ITU-T J.83; Annex A and B
    • DVB Symbol Rate: Variable; up to 7 MSymbol/sec (MBaud)
    • Frequency Range: 54 to 1002 MHz
    • Tuning: CATV Channel Selectable (Ch. 2 to 158)

      Output

    • Channels Bandwidth: 24 MHz (4x Adjacent 6 MHz)
    • RF Level: +40 dBmV (Ā±1 dB increment)
    • RF Level Adjustment Range: +35 to +42 dBmV (Ā±1 dB increment)
    • Frequency Tolerance: Ā± 0.5 kHz @ 77 Ā°F (25 Ā°C)
    • Frequency Stability: Ā± 5 kHz over 32 to 122 Ā°F (0 to 50 Ā°C)
    • Amplitude Flatness: Ā± 0.25 dB (over 6 MHz channel)
    • Phase Noise: -98 dBc (@ 10 kHz)
    • Spurious: -60 dBc
    • Broadband Noise :-70 dBc (@ +40 dBmV output level, 5.5 MHz bandwidth)
    • Impedance: 75 Ī©
    • Spectral Inversion: Auto Recognition
    • Carrier Suppression: 45 dB
    • Return Loss: 14 dB typical
    • Signal to Noise Ratio: 40 dB typical
    • MER: 39 dB typical
    • I/Q Phase Error: Less than 1 degree
    • I/Q Amplitude Imbalance: Less than 1%
    • IP
      Connector 1x RJ45 (Rear Panel)
      Standard 1000Base-T Ethernet (GigE)
      UDP/RTP Supported (User-Selectable)
      Address Assignment IPv4 addresses & port numbers (User-Selectable)
    • ASI
      Connector 1x BNC Female
      Standard DVB-ASI; EN 50083-9

      Alarms & Monitoring

    • Local Monitoring: 1x Power LED, 1x Status LED
    • Local Control: 1x IP Reset Button
    • Remote Device Monitoring/Control: 1x RJ45 (10/100Base-T), GUI-Based Menu via Web Browser

      General

    • Dimensions (W x H x D): 8.69 x 1.97 x 12.70 in (220.7 x 50.0 x 322.6 mm)
    • Weight: 3.0 lbs (1.36 kg)
    • Power: 12 VDC External Power Supply
    • Power Dissipation: 20 W
    • Operating Temp: 32 to 122 Ā°F (0 to 50 Ā°C)
    • Storage Temp: -13 to 158 Ā°F (-25 to 70 Ā°C)
    • Operating/Storage Humidity: 0 to 95% RH @

  • Item Includes:

    • 1x Blonder Tongue CLEARVIEW FLEX QAM Flexible Transmodulator – 32 IP/ASI In/Cherry Pick/IP/ASI/4 QAM Out

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Blonder Tongue Clearview Flex QAM Flexible Transmodulator – 32 IP/ASI In/Cherry Pick/IP/ASI/4 QAM Out”

There are no reviews yet.

Related products