Broadcom NetXtreme E-Series N225P – network adapter – OCP 3.0 – 10Gb Ethernet/25Gb Ethernet x 2


Broadcom NetXtreme E-Series N225P – Network adapter – OCP 3.0 – 10Gb Ethernet/25Gb Ethernet x 2

AED2,099.00

The BroadcomĀ® BCM957414N4140C is a dual-port 25 Gb/s PCI Express 3.0 x8 network adapter designed to the Open Compute Project (OCP) 3.0 Design Specification in small form factor with two SFP28 network connectors. The adapter supports SFP28 optical modules and copper direct-attach cables. The network adapter uses the Broadcom BCM57414 25GbE MAC controller with an integrated dual-channel 25GbE SFI transceiver.

Broadcom’s NetXtreme E-series network controller delivers best-in-class performance and hardware acceleration and offload capabilities that result in higher throughput, higher CPU efficiency, and lower workload latency for TCP/IP as well as RoCE traffic.

Broadcom OCP NIC 3.0 Ethernet adapters utilize the NetXtreme marketleading 25G NRZ, 50G PAM-4, and PCIe 4.0 SerDes technology, ensuring seamless interoperability with Broadcom’s market-leading Top-of-Rack switch and PCIe Express switch solutions which also use the same SerDes technology

SKU: BCM957414N4140C Category: Tag:
Category Description
General
Device Type Network adapter
Form Factor Plug-in card
Interface (Bus) Type Open Compute Project mezzanine (OCP) 3.0
Networking
Ports 10Gb Ethernet/25Gb Ethernet x 2
Connectivity Technology Wired
Data Link Protocol 10 Gigabit Ethernet, 25 Gigabit Ethernet
Features WOL, IPv6 support, DCBX support, IPv4 support, PXE support, LSO, LRO, RSS, UEFI support, SR-IOV, DCB, TSO, MSI-X, GRE, iSCSI boot, PFC, NC-SI, VXLAN, NVGRE, FLR, MSI, Jumbo Frames support (up to 9000 bytes), MCTP over SMBus, TruFlow, Interrupt coalescing, VMMQ, ETS, QCN, GENEVE support, Low Latency RDMA over RoCE, OCP 3.0 support, vSwitch Acceleration, tunnel-aware stateless offloads, SMBus 2.0, NetQueue
Compliant Standards IEEE 802.3ap, IEEE 802.3az
Processor / Memory Processor: Broadcom BCM57414
Expansion / Connectivity
Interfaces 2 x 10Gb Ethernet/25Gb Ethernet – SFP28
Miscellaneous
Compliant Standards EMC
Dimensions & Weight
Weight 3.21 oz
Environmental Parameters
Min Operating Temperature 32 °F
Max Operating Temperature 131 °F

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Broadcom NetXtreme E-Series N225P – network adapter – OCP 3.0 – 10Gb Ethernet/25Gb Ethernet x 2”

There are no reviews yet.