04 3550600 052 7036860
Awaiting product image
Placeholder

Brocade BR-1860-1P 16Gb Single Port HBA

Add to Wishlist

AED899.00

Add to Wishlist

Brocade BR-1860-1P 16Gb Single Port Fibre Channel PCIe HBA w/ one 10 GbE SR SFP+ included – Brand New

Brocade BR-1860-1P 16Gb Single Port Fibre Channel PCIe / PCI Express HBA / Host Buss Adapter with one (1) 10 GbE / Gigabit Ehernet SR SFP+ (plus) included – Brand New

The Brocade 1860 Fabric Adapter is a new class of adapter that meets all the connectivity needs of cloud-enabled data centers while providing unmatched performance, application-aware services, unified management, and reduced cost and complexity. It is the simplest, most flexible, and most powerful server connectivity adapter designed to extend fabric services to Virtual Machines (VMs) and applications in highly demanding virtualized environments.

The BR-1860 stand-up Fabric Adapters are low-profile MD2 form factor PCI Express (PCIe) cards, measuring 16.751 cm by 6.878 cm (6.595 in. by 2.708 in.). One and two-port models are available. Ports support 10 GbE, 8 Gbps FC, or 16 FC small form factor pluggable (SFP+) transceiver optics. With the appropriate optic installed, ports can be configured for HBA, CNA, or NIC operation using the AnyIO feature.

FCC Warning (US Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or locate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
SKU: BR-1860-1P Category: Tag:
Weight 0.680 kg
BROCADE 1860 FABRIC ADAPTER SPECIFICATIONS
Model Numbers BR-1860-1P
Alternate Model Numbers 00Y7028
00Y7026
00Y7027
Product Description Single port, one 10 GbE SR SFP+ included
Fibre Channel Specifications
Data rate
  • 14.025 Gbps (1600 MB/sec)
  • 8.5 Gbps (800 MB/sec)
  • 4.25 Gbps (400 MB/sec)
  • 2.125 Gbps (200 MB/sec) auto-sensing (per port)
  • full duplex
Performance Over 500,000 IOPS per port

(1,000,000 IOPS per dual-port adapter)
Protocols
  • SCSI-FCP
  • FCP-2
  • FCP-3
  • FC-SP

(See Documentation) for full list of supported protocols.
Topology Point-to-point (N_Port), switched fabric (N_Port), FC-AL, FC-AL2
Dynamic Fabric Provisioning (DFP) DFP for Fibre Channel Fabric Assigned Worldwide Name (FA-WWN)
Diagnostic Port (D_Port) P Port type enabling rapid isolation of optics or cable problems
Credit recovery Buffer credit loss detection and automatic recovery. Supported on Brocade 1860 when operating at 16 Gbps link speed.
Forward Error Correction (FEC) Error recovery mechanism to correct bit errors without referring back to the originator of the frame. Supported on Brocade 1860 when operating at 16 Gbps link speed.
Distance support
  • 15 meters (m) at 16 Gbps on 62.5/125 Ī¼m (OM1) Multi-Mode Fiber (MMF)
  • 35 m at 16 Gbps on 50/125 Ī¼m OM2 MMF
  • 100 m at 16 Gbps on 50/125 Ī¼m OM3 MMF
  • 125 m at 16 Gbps on 50/125 Ī¼m OM4 MMF
  • 10 km at 16 Gbps on 9/125 Ī¼m Single-Mode Fiber (SMF)
Brocade Server Application Optimization (SAO)
  • Extends Quality of Service (QoS) to VMs and applications
  • N_Port Trunking of 2Ɨ16 Gbps links into a single logical 32 Gbps link
Boot options
  • Boot from SAN (including DAS point-to-point topology)
  • Fabric-based Boot LUN Discovery
  • Boot-up delay in 1-, 2-, 5-, and 10-minute intervals
Ethernet Specifications
Data rate 10.3125 Gbps
Performance 10 Gbps full-duplex line rate
Distance support
  • 33 meters at 10 Gbps on 62.5/125 Ī¼m (OM1) Multi-Mode Fiber (MMF)
  • 82 m at 10 Gbps on 50/125 Ī¼m OM2 MMF
  • 300 m at 10 Gbps on 50/125 Ī¼m OM3 MMF
  • 10 km at 10 Gbps on 9/125 Ī¼m Single-Mode Fiber (SMF)
Frame sizes All standard Ethernet frame sizes supported, including 9600 byte jumbo frames and mini-jumbo frames
DCB support
  • ā€¢ 802.1Qaz: Enhanced Transmission Selection (ETS) and Data Center Bridging Exchange (DBCX) protocol
  • 802.1Qbb: Priority-based Flow Control (PFC)
  • iSCSI Type-Length Value (TLV) support
Ethernet accelertion
  • IPv4/IPv6, TCP, and UDP checksum offload
  • IPv4 header checksum offload
  • TCP Segmentation Offload (TSO)
  • Receive Side Scaling (RSS)
  • Header Data Split (HDS)
  • VLAN insertion/stripping and filtering
  • Large Receive Offload (LRO)
Virtual switching offloads Virtual Machine Optimized Ports (VMOPs)

  • VMware NetQueue (Tx and Rx)
  • Microsoft VMQ (Rx)
  • Edge Virtual Bridging (EVB) 802.1Qbg-ready hardware
  • Virtual Ethernet Bridging (VEB)
  • Virtual Ethernet Port Aggregator (VEPA)
Boot options Pre-boot eXecution Environment (PXE and gPXE)
FCoE Specifications
Protocols
  • FC-SP
  • FC-LS
  • FC-GS
  • FC-FS2
  • FC-FDMI
  • FC-CT
  • FCP
  • FCP-2
  • FCP-3
  • FC-BB-5
Performance Over 500,000 IOPS per port
(1,000,000 IOPS per dual-port adapter)
Logins Support for 2048 logins and 4096 exchanges
Class of service Class 3, Class 2 control frames supported
Boot options
  • Boot from SAN (including DAS point-to-point topology)
  • Fabric-based Boot LUN Discovery
  • Boot-up delay in 1-, 2-, 5-, and 10-minute intervals
Host Specifications
Server platform Intel (IA32, IEM64T), AMD (x86, 64), and Sun (x86, SPARC)
Server chipset Intel, nVidia, ServerWorks/Broadcom, AMD/ATI, and SPARC
Bus interface PCI Express Gen 2.0 Compatible (x8), with MSI-X and INTx
Software
Management
  • Brocade Host Connectivity Manager (HCM)
  • Brocade Configuration Utility (BCU) Command Line Interface (CLI)
  • Brocade Network Advisor
Driver-and HCM-supported operating systems (check the Brocade Server Adapters Interoperability Matrix for a complete list)
  • Windows Server 2003/2008/2008 R2/2012 (Hyper-V)
  • RHEL 4/5/6
  • SLES 9/10/11
  • Solaris 10/11 (x86 and SPARC)
  • and VMware ESX 3.5, ESX/ESXi 4.0/4.1/5.0/5.1
APIs SNIA-HBA-API 2.0 and FDMI-I
I/O Virtualization
Brocade vFLink Up to four Physical Functions (PFs) per port (eight PFs per dual-port adapter) with configurable minimum and maximum bandwidth assignment allocated in 100 Mbps increments
SR-IOV Up to 255 Virtual Functions (VFs) per adapter
Physical Specifications
Supported media
  • Brocade 16 Gbps Fibre Channel LC-style pluggable (SFP+), SWL (850 nm) and LWL 10 km (1310 nm), hot-swappable
  • Brocade 8 Gbps Fibre Channel LC-style pluggable (SFP+), SWL (850 nm) and LWL 10 km (1310 nm), hot-swappable
  • Brocade 10 Gbps Ethernet LC-style pluggable (SFP+), SR (850 nm) and LR 10 km (1310 nm), hot-swappable
  • Brocade 10 Gbps Ethernet LC-style pluggable (SFP+), USR (100 m), hot-swappable
  • Brocade 10 Gbps Ethernet direct-attached active Twinax SFP+ copper cable (1 m, 3 m, 5 m), hot-swappable
  • Non-Brocade 10 Gbps Ethernet directattached active Twinax SFP+ copper cable (1 m, 3 m, 5 m, 7 m, 10 m), hotswappable (requires software driver version 3.0.3 or later)
Form factor PCI Express low-profile form factor
16.77 cmƗ6.89 cm
(6.60 in.Ɨ2.71 in.)
Bracket size
  • Standard:
    1.84 cmƗ12.08 cm
    (0.73 in.Ɨ4.76 in.)
  • Low profile:
    1.84 cmƗ8.01 cm
    (0.73 in.Ɨ3.15 in.)
Environmental and Power Requirements
Airflow 45 LFM
Temperature
  • Operating temperature
    0ĀŗC to 55ĀŗC
    32ĀŗF to 131ĀŗF (dry bulb)
  • Non-operating temperature
    āˆ’43ĀŗC to 73ĀŗC
    āˆ’40ĀŗF to 163ĀŗF (dry bulb)
Humidity
  • Operating humidity
    5% to 93%
    (relative, non-condensing)
  • Non-operating humidity
    5% to 95%
    (relative, non-condensing)
Power dissipation 9 W (typical)
Operating voltage 12 V
Agency Approvals
United States 45 LFM
Canada 45 LFM
Japan 45 LFM
European Union 45 LFM
Australia, New Zealand 45 LFM
Russia 45 LFM
Korea 45 LFM
Taiwan CNS 13438(95) Class A; BSMI Mark

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Brocade BR-1860-1P 16Gb Single Port HBA”

There are no reviews yet.

Related products