30 in stock
49,929.00 د.إ
30 in stock
WS-X6816-10G-2T is 16-port 10 Gigabit Ethernet Fiber Module for Cisco Catalyst 6500 E-series switch with exclusively supported by Supervisor Engine 2T. WS-X6816-10G-2T equipped with WS-F6K-DFC4-E daughter card to deliver optimal performance up to a sustained 60 Mpps for L2, IPv4 and MPLS forwarding and 30 Mpps for IPv6 forwarding, and makes this module ideally suited for deployment in access and aggregation network in campus and data center.
| Model info: | WS-X6816-10G-2T | Ā |
| Product Description | Cisco Catalyst 6500 Series 10 Gigabit Ethernet interface module WS-X6816-10G-2T | Ā |
| Devide Tyde | 10 Gigabit Ethernet interface Fiber module | Ā |
| Ports | 16 * 10G X2 ports | Ā |
| Switch fabric connection | 2 * 20 Gbps (40 Gbps total ) | Ā |
| Forwarding Engine | WS-F6K-DFC4-E | Ā |
| ACL entries | 64,000 | Ā |
| Netflow entries | 512,000 | Ā |
| Routing entries | 256,000 | Ā |
| Bridge Domains | 16,000 | Ā |
| MAC address | 128,000 | Ā |
| Multicast routing | 256,000 | Ā |
| IPv4 forwarding speed | 60 Mpps | Ā |
| Queues | Oversubscription mode ā Receive: 1 priority queue, 7 round robin queues, 2 threshold per port ā Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group |
Performance mode: ā Receive: 8 priority queue, 4 threshold per port ā Transmit: 1 priority queue, 7 round robin queues, 4 threshold per port group
|
| Scheduler | Oversubscription mode: ā DWRR ā WRED |
Performance mode: ā DWRR ā WRED ā SRR at egress |
| Virtual Switch Link (VSL) | Oversubscription mode: No | Performance mode: Yes (Up to 4 10 Gigabit Ethernet ports can be used for virtual switch link) |
| Port buffers | Oversubscription mode: ā 90 MB per port group |
Performance mode: ā 256 MB per port (128 MB for ingress and 128 MB for egress) |
| Queuing Mechanisms | ā CoS-based queue mapping ā DSCP-based queue mapping |
Ā |
| Hardware-based Multicast replication | ā Ingress and egress ā Approximately 20 GB per replication engine ā 2 replication engines per module |
Ā |
| Jumbo frame support for bridged and routed packets | Up to 9216 bytes | Ā |
| Maximum port density per chassis | ā 176 ports (6513-E chassis) ā 128 ports (6509-E chassis) |
Ā |
| Maximum port density per VSS | 352 ports | Ā |
| Supervisor engines supported | Cisco Catalyst 6500 Series Supervisor Engine VS-S2T-10G | Ā |
| Chassis supported | ā Any Cisco Catalyst 6500 E-Series chassis, including 6503-E, 6504-E, 6506-E, 6509-E, 6509-V-E (NEBS compliant) and 6513-E chassis | ā Not supported in non-E Series chassis |
| Slot requirements | ā Can occupy any slot in any Cisco Catalyst 6503-E, 6504-E, 6506, 6506-E, 6509, 6509-E, 6509-V-E | ā Can occupy slots 1-6 and 9-13 in a Cisco Catalyst 6513-E chassis |
| Onboard memory | 1 GB default | Ā |
| Power requirement | 488.5 Watts | Ā |
| X2 Pluggable Optics part number | ā X2-10GB-LRM(multimode fiber): 1310 nm serial, 220m over multimode fiber ā X2-10GB-LR(single-mode fiber): 1310 nm serial, 10 km over single-mode fiber ā X2-10GB-ER(single-mode fiber): 1550 nm serial, 40 km over single-mode fiber |
ā X2-10GB-SR(multimode fiber): 850 nm serial, up to 300m over multimode fiber ā X2-10GB-LX4(multimode fiber): WWDM 1310 nm, up to 300m over multimode fiber ā X2-10GB-ZR: 1550 nm serial, 80 Km over single-mode fiber |
| Weight | 6.4 kg |
|---|
HP Universal Notebook Stand (NL514AA) 
Dell Hard Drive : 146GB 2.5inch SAS (15.000 Rpm) Hard Drive 
04 3550600
052 7036860
There are no reviews yet.