04 3550600
052 7036860
The IW-PWRINJ-60RGDMG= power injector is powered by a single-phase AC voltage input in the range of 90VAC to 264VAC, providing a maximum output of power at a nominal DC Voltage on the appropriate four data pairs of the output RJ45 connector. The power injector meets the requirements of IEEE 802.3bt as a PSE. It can accept 10/100/1000/2500/ 5000/10000 Base-T traffic on the input and output RJ45 connectors and pass through these signals between the network and the access point.
| General Information | |
| Product Name | Power Injector, 60W, Outdoor mGig |
| Product Model | IW-PWRINJ-60RGDMG= |
| Product Type | PoE Injector |
| Interfaces/Ports | |
| Input Ports | RJ-45 |
| Output Ports | RJ-45 |
| Power Description | |
| Input Voltage | 120 V AC230 V AC |
| Maximum Output Current | 670 mA |
| Maximum Output Power | 60 W |
| Physical Characteristics | |
| Form Factor | Surface/Pole Mountable |
| Height | 2.3″ |
| Width | 6.7″ |
| Length | 9.7″ |
Based on 0 reviews
Be the first to review “Cisco Systems Power Injector, 60W, Outdoor mGig”
Related products
-
Power Adapter
Altronix IP Access Facp Adapters. Facil itates
- IEEE 802.3af (15W) and IEEE 802.3at (30W).
- Single PoE+ input powers up to two (2) locks and one (1) access controller.
- Fire Alarm input trigger allows to disconnect lock power without dropping power to the IP/PoE Access Control Panel.
- Supervised Fire Alarm Disconnect is selectable for
- Normally Open (N.O.) or Normally Closed (N.C.) trigger input.
- UL Listed in the U.S. and Canada.
- CE Approved.
- CSFM Approved.
SKU: ENTRADA2DMK -
There are no reviews yet.