04 3550600 052 7036860

ClearOne Converge Pro 2 128VTD Advanced Multichannel Mic Auto Mixer with Dante, VoIP, Telco, and DSP

Add to Wishlist
Key Features
  • 12 Mic/Line Inputs + 8 Mic/Line Outputs
  • 16 Dante Inputs + 16 Dante Outputs
  • Analog Telco Interface
  • Built-In USB Audio
  • DARE Dynamic Feedback Elimination
  • SIP Conferencing 5 Lines & 5 Calls
  • Daisy-Chain with BMA CT, DIALOG
  • VoIP & POTS Conferencing

31,199.00 د.إ

Add to Wishlist

ClearOne 128VT Overview

System integrators looking for a powerful digital signal processor that supports VoIP via SIP or MS Teams and Dante will be impressed with the ClearOne Converge Pro 2 128VTD, an advanced multichannel microphone automixer with 12 configurable mic/line audio inputs, 8 configurable mic/line audio outputs, built-in USB audio, and a Telco interface for POTS calls.

The Converge Pro 2 128VTD is well suited for VoIP conferencing, audio recording, pre-recorded digital audio, audio networking over a LAN, web conferencing, UC audio conferencing, sound reinforcement with DARE feedback elimination, bridge web conferences with VoIP or Skype for business and is a great choice for conference rooms, training centers, lecture halls, courtrooms, telemedicine theaters, and houses of worship.

Benefits
  • Daisy-chain the CONVERGE Pro 2 with the BMA CT, DIALOG 20 2-Channel Wireless Microphone System, and other peripheral devices through P-Link
  • 12 mic/line inputs and 8 mic/line outputs
  • Support for SIP based conferencing up to 5 lines and 5 calls based on line configuration
  • 16 Dante inputs and 16 Dante outputs for audio networking
  • Analog Telco interface
  • Built-in Skype for Business client
  • Built-in USB audio
  • Built-in DARE algorithm for dynamic feedback elimination
  • C-Link and P-Link enable easy addition of DSPs and peripherals
  • Configure an entire system of C-linked DSPs with CONSOLE AI software
  • Flexible control options include Touch-Panel Controller, BYOD dialer apps, or third-party control modules
  • Reduced foot-print and power consumption
SKU: 910-3200-009 D Category:

ClearOne 128VT Specs

Mic/Line Inputs and Outputs
Inputs Balanced Audio Inputs: 0.15″ / 3.81 mm Orange Color Phoenix/Euroblock Male Header, Push-On Mini-Terminal Block
Outputs Balanced Audio Outputs: 0.15″ / 3.81 mm Black Color Phoenix/Euroblock Male Header, Push-On Mini-Terminal Block
Frequency Response 20 Hz to 22 kHz at +4 dBu, ±0.5 dBu
Equivalent Input Noise 20 kHz BW, Max Gain, Rs = 150 Ohms, -126 dBu
Total Harmonic Distortion (THD) + N 20 Hz to 22 kHz at +4 dBu, Line Level, 0.006%
20 Hz to 22 kHz at -56 dBu, Mic Level, < 0.04%
Dynamic Range 20 Hz to 20 kHz at 0 dB, > 105 dB
Crosstalk Mic/Line: Channel to Channel, Stimulus at 20 dBu to Receptor at -56 dBu, 1 kHz, < -98 dB
Input Impedance Balanced (Line to Ground), 2.2 Kilohms, 1%
Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB Step Coarse Gain
Maximum Input Level -65 dBu to 20 dBu
Phantom Power 48 V, 6.81 Kilohms
Output Impedance Balanced (Line to Ground), 95 Ohms, 1%
Output Level Nominal: 0 dBu
Maximum: 20 dBu
Selectable: -40 dBu
USB Audio
Port Type USB-B Connector
Audio Digital Audio, 2 x 2 Bidirectional Channels
Sample Rate 48 kHz
Bit Depth Sample: 24-Bit
Compatible USB 2.0
USB 3.0
Telephone Specifications
Port Type RJ11
Frequency Response Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, ±2 dB, 4 dBu
Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, ±2 dB, -15 dBu
Total Harmonic Distortion (THD) + N Mic/Line Input to Telephone Out: < 0.1% at 4 dBu
Telephone In to Mic/Line Out: < 0.3% at -15 dBu
Dynamic Range Mic/Line Input to Telephone Out: >67 dBu
Telephone In to Mic/Line Out: >87 dBu
REN Ringer Equivalent Number: 0.2
Transhybrid Balance 30 dB (1 kHz, All AC Terminations)
VoIP
Port Type RJ45, 10/100 Mb/s Ethernet Network, Auto Negotiation
Audio 5 Lines
Codec G.711 uLaw, G.711 ALaw, G.722
Skype Skype for Business (S4B):
Microsoft Skype for Business Support (1 Client)
Choose Either Regular VoIP or S4B Through Configuration
Ethernet
Port Type RJ45, 10/100 Mb/s Ethernet Network, Auto Negotiation
IP Address Assignment IPv4 (IPv6 Upgradeable Through Future Software, Firmware Upgrade)
Dante Network
Port Type RJ45 Gigabit Ethernet Connectors for Primary and Secondary Ports
Audio Digital Audio, 16 x 16 Bidirectional Channels
Sample Rate: 48/96 kHz
Sample Bit Depth: 24-Bit
C-Link Expansion Bus
Port Types RJ45 (Cat 5e or Cat 6)
C-Link In & Out: Proprietary Expansion Bus
Audio: 64 Expansion Channels
Cable: Solid Core, Factory Terminated Cat 5e or 6 Cable
Distance: Up to 150′ / 45 m
P-Link Peripheral Bus
Port Types RJ45 (Cat 5e or 6)
P-Link Connector In and Out: Proprietary Peripheral Bus
PoE In: P-Link In Port
PoE 802.3 af Mode B, Midspan
Power On “Spare Pairs” 4, 5, 7, and 8
Input Voltage Range: 48 to 56 V
Audio Up to 3 Beamforming Microphone Array 2 Units + up to 3 DIALOG 20 Wireless Receiver Units + up to 3 USB Expander Units + up to 3 GPIO Expander Units
Cable Solid Core, Factory Terminated Cat 5e or 6 Cable
Distance Up to 200′ / 60 m
Long Distance P-Link Increases P-Link Distance from 200 x 650′ / 61 x 198.1 m
650′ / 200 m Maximum Cable Distance between any Two Units
Cat 6, 550 MHz, 23 AWG, Solid Conductor Cable
Do Not Use Copper Clad Aluminum (CCA) Cable
Available Only for BFM2 Peripheral Units
48 V PoE Midspan Mode B Power Injector for 1 BFM2 Unit
56 V PoE Midspan Mode B Power Injector for 3 BFM2 Units
RS232 Parameters
Port Type DB9 female
Settings 9600/19200/38400/57600/115200 Baud; Serial Echo; Flow Control
Support Serial Commands
GPIO
Port Type 0.2″ / 0.5 cm Green Color Phoenix/Euroblock Type Male Header
Support Control, Status, Variable Voltage Control
Power Pin Assignment 5 VDC at 350 mA Power Source
Pin Assignments Pin 1 to 4:
Open Collector Outputs: 40 VDC at 250 mA
Active Outputs (Source/Sink): 5 VDC at 25 mA
Logic Inputs: 40.2 kilohms pull up
Variable Voltage Control Inputs: 5 VDC Max
Ground Pin: GND
USB Control
Port Type USB-B Connector
Location Front Panel
Compatible USB 2.0, USB 3.0
LEDs
Location Front Panel
Status LEDs Off: Unit Still Initializing
Blue – Fast Blinking: Stack Syncing in Progress
Blue – Slow Blinking: Unit Not Configured
Blue – Solid: Configured Unit
Red – Fast Blinking: Stack Sync Error
LED Locate LED: Blue – Blinking: Unit “Locate” Command Received
Power LED: Blue – Solid: Unit Is Powered On
Touch Sensor
Sensor Type Capacitive Touch Button
Location Front Panel
Power
Port Type AC Inlet
Mains Voltage 100 to 240 VAC, 50/60 Hz
Power Consumption 50 W Typical
Thermal 170 BTU/Hr Typical
Operating Temperature 14 to 104°F / -10 to 40°C
Dimensions & Weight
Rack Units 1 RU
Dimensions Without Rack Ears: 17 x 10.7 x 1.7″ / 43.2 x 27.3 x 4.4 cm
With Rack Ears: 19 x 10.7 x 1.7″ / 48.3 x 27.3 x 4.4 cm
Weight 9.3 lb / 4.2 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ClearOne Converge Pro 2 128VTD Advanced Multichannel Mic Auto Mixer with Dante, VoIP, Telco, and DSP”

There are no reviews yet.

Related products