04 3550600 052 7036860

Contemporary Research ICC1-IRX 1-Way RF Coax IR TV Controller

Add to Wishlist

د.إ3,999.00

Add to Wishlist

Contemporary Research ICC1-IRX Overview

The Contemporary Research ICC1-IRX IR TV Controller provides one-way control over power, volume, and NTSC/HDTV channel tuning on your IR format TVs, LCDs, and Plasma displays. It receives iCC-Net network commands over the same broadband coax that carries the CATV channels. This compact unit can be networked with up to 4,000 displays using the Contemporary Research head end units.

 

The ICC1-IRX IR TV controller features power current sensing using the Xantech CSM1 sensor (not included). It is suitable for applications that include signage and video distribution for schools, colleges, sports venues, corporates, places of worship, and entertainment spaces.

  • Controls most brands of IR-controlled TVs
  • Sends IR commands for discrete power, on and off, analog and HD tuning, and volume
  • Manages channel access by changing the TV’s internal available channel list
  • Delivers power control using the optional Xantech CSM1 power current sensor, or optional CC-HSD scan sensor for older tube TVs
  • Networks up to 4,000 TVs through the ICE-HE Ethernet Head-End (not included)
  • Receives one-way individual and zone commands from a single RS-232 port on the Head-End
  • Operates over same RF coax cable as CATV channels
  • SmartZone architecture controls hundreds of controllers with a single command
  • Low-loss internal RF tap saves amplification and installation costs
  • Provides LED feedback for network, IR control, and power status
  • Restores all power and channel status after loss of power from the on-board database
  • Mounts on the back of the TV for simplified control and RF installation
  • Operates with Contemporary Research Display Express software as well as from RS-232 protocol from a custom-programmed PC or control system
SKU: 5101-001 Category: Tag:
Control Options
Discrete IR control
Power, channels, inputs
Database
Control Database:
On-board commands for most display makes and models, network selectable
Tuning
NTSC and HDTV channels
Data
Data Receive:
Mid-band VHF, 74.7 MHz, sent from ICC-HE Ethernet Head End
Signal Level: -25 to +35 dBmV
Connectors
RF In:
‘F’, female, RF from CATV system, iCC-Net control
Impedance: 75 Ohms

RF Out:
‘F’, female, RF to TV, less than -1.5 dbmV loss
Impedance: 75 Ohms

IR Out:
3.5 mm jack for CC-IRE IR Emitter cable or compatible CC-IRS serial cable
Supports carrier frequencies up to 62 kHz

Power Sensor:
3.5 mm jack for optional CC-HSD scan sensor
Logic level input, switch to GND to signal power on

CSM1:
3.5 mm jack for power and data from Xantech CSM1 power current sensor

Power In:
2.1 mm coaxial jack (inside center conductor positive), 75 mA maximum
Switch
DIP Switches: S1 and S2, located on base, sets IR code operation and device number
Indicator LEDs
Net:
Green LED for iC-Net bus and DC power, flashes once per second if active

IR Out:
Red LED lights when sending IR commands

Power Sensor:
Red LED lights when sensor indicates power on
Enclosure
All aluminum with durable black powder coat paint
Mounting
Mounts to rear of the TV
Power
11.5 to 16.5 VDC, 12 VDC typical (may be unregulated)
Dimensions
5.5 x 1.1 x 3.4″ (140 x 28 x 3.4 mm)
Weight
8 oz (226 g)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Contemporary Research ICC1-IRX 1-Way RF Coax IR TV Controller”

There are no reviews yet.

Related products