04 3550600 052 7036860

Crown Audio DCI8300N 8-Channel DriveCore Install Series Network Amplifier (300W)

Add to Wishlist
Key Features
  • DriveCore Technology
  • Remarkable Performance & Reliability
  • Supports HiQnet Audio Architect Software
  • Monitor & Control over Standard TCP/IP
  • Advanced DSP on Inputs & Outputs
  • Works with 70 & 100V Speakers
  • Universal Power Supply
  • Included Power Cord

د.إ33,999.00

Add to Wishlist

The 300W, high-performanceĀ Crown Audio DCI8300N 8-Channel DriveCore Install Series Network AmplifierĀ is designed for system integrators looking for 21st century advanced features for installed sound applications. The amplifier utilizes Harman DriveCore technology, featuring a patented integrated circuit that combines hundreds of discrete circuits into a single chip for lower power, better performance, and improved reliability.

The Class-D amplifier works with impedance loads from 2 to 16 ohms plus 70/100V speakers. The rear panel sports two BLU link connectors capable of delivering 256 channels of digital audio over a standard Cat 5e cable. Additionally, a standard Ethernet connector provides HiQnet Audio Architect control via a Cat 5e port, while the programmable GPIO control port allows for control from analog components such as volume dials.

The onboard digital signal processor provides input/output EQ filters, crossovers, time-alignment delay, and LevelMAX limiters for outstanding protection. Additional protection circuits include shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high-frequency overload. The DCI8300N ships with a power cord.

  • Exclusive multi-patented DriveCore Technology: the patented DriveCore integrated circuit combines hundreds ofĀ discrete circuits into one chip for better performance, lower power consumption, and improved reliability
  • BLU link Digital Audio Transport: up to 256 channels of digital audio over Category 5e cabling
  • Configuration in HiQnet Audio Architect
  • Programmable general purpose input/output (GPIO) control port
  • Digital Signal Processing
    • Input/output EQ filters
    • Crossover
    • Input/output delay
    • LevelMAX limiters
  • Priority input router
  • PFC power supply: universal PFC power supply for reduced current draw and provides industry leading efficiency
  • Monitoring and control over TCP/IP
  • Real time continuous loading monitoring
  • Power saving modes: power consumption in sleep mode is less than 1W
  • Adjustable auto standby
  • Remote power off: Sleep mode activated via AUX port
  • 70 Vrms/100 Vrms direct drive: each channel individually selectable for low-Z or high-Z operation
  • Advanced protection circuits: amplifier and loads are protected against shorted outputs, DC, mismatchedĀ loads, overheating, over- or under-voltage, and high-frequency overload
  • 3-year, no-fault transferable warranty
  • Complies with GreenEdge by HARMAN: environmentally friendly practices in design, manufacturing, and packaging complement energy-efficient operation
SKU: DCI8X300N-U-USFX Category: Tag:
Key Specs
Number of Channels
8
Amplifier Power Rating
2 Ohms:
150 W per Channel (Full Range)
4 Ohms / 8 Ohms:
300 W per Channel (Full Range)
16 Ohms:
150 W per Channel (Full Range)
70 V / 100 V:
300 W per Channel (Full Range)
4 Ohms:
300 W Bridged (Full Range)
8 Ohms / 16 Ohms / 140 V / 200 V:
600 W Bridged (Full Range)
Load Impedance / Voltage
Parallel/Stereo:
2 / 4 / 8 / 16 Ohms per Channel
70 / 100 V per Channel
Bridged/Mono:
4 / 8 / 16 Ohms
140 / 200 V
DSP
Yes
Analog Audio I/O
4x Block 6-Pin Balanced Line Input
4x Screw Terminal 4-Pin Speaker Output
Digital I/O
1x RJ45 Ethernet Input (Control)
2x RJ45 BLU-Link Input/Output (I/O)
Rackmount Size
2 RU
Amplifier Power Rating
2 Ohms:
150 W per Channel (Full Range)
4 Ohms / 8 Ohms:
300 W per Channel (Full Range)
16 Ohms:
150 W per Channel (Full Range)
70 V / 100 V:
300 W per Channel (Full Range)
4 Ohms:
300 W Bridged (Full Range)
8 Ohms / 16 Ohms / 140 V / 200 V:
600 W Bridged (Full Range)
Amplifier Class
Class-D
Load Impedance / Voltage
Parallel/Stereo:
2 / 4 / 8 / 16 Ohms per Channel
70 / 100 V per Channel
Bridged/Mono:
4 / 8 / 16 Ohms
140 / 200 V
Performance
Protections
DC Fault, Low Impedance, Overvoltage, Short Circuit, Thermal, Ultrasonic, Undervoltage
Frequency Response
20 Hz to 20 kHz Ā±0.25 dB (8 Ohms)
Damping Factor
> 1000
Input Sensitivity
1 Vrms (at 8 Ohms)
1.4 Vrms (at 70 V)
2 Vrms (at 100 V)
Input Impedance
10 Kilohms (Balanced)
5 Kilohms (Unbalanced)
Max Gain
34 dB (at 4 Ohms, at 8 Ohms, at 70 V, at 100 V)
Max Input Level
+20 dBu
SNR
> 104 dB
THD
0.35% (Full Range, at Rated Power)
Intermodulation Distortion
ā‰¤ 0.35%
Crosstalk
> 80 dB (Below Rated Power, 20 Hz to 1 kHz)
Common Mode Rejection Ratio (CMRR)
> 70 dB
Signal Processing
DSP
Yes
Crossover
Yes
Compressor
Yes
Limiting
Yes
Connectivity
Analog Audio I/O
4x Block 6-Pin Balanced Line Input
4x Screw Terminal 4-Pin Speaker Output
Digital I/O
1x RJ45 Ethernet Input (Control)
2x RJ45 BLU-Link Input/Output (I/O)
USB I/O
No
Power
AC Input Power
100 to 240 VAC, 50 / 60 Hz
AC Power Connector
1x IEC 15 A / NEMA 5-15
Current Consumption
120 VAC:
3.5 to 4.9 A (1/8 Power)
6.5 to 10 A (1/3 Power)
230 VAC:
1.8 to 2.5 A (1/8 Power)
3.3 to 5.2 A (1/3 Power)
Power Consumption
120 VAC:
222 to 277 W (1/8 Power)
287 to 377 (1/3 Power)
230 VAC:
216 to 267 W (1/8 Power)
270 to 369 (1/3 Power)
Physical
Display & Indicators
10x LED (Bridged Mode/Clip/Comm/Fault/Level/Power/Signal/Thermal)
Rackmount Size
2 RU
Cooling
1x Fan (Variable Speed)
Thermal Dissipation
1287 BTU/hr (Maximum)
Dimensions
19.0 x 3.5 x 14.2″ / 48.3 x 8.9 x 36.1Ā cm
Weight
23.5Ā lb / 10.7Ā kg
Packaging Info
Package Weight
32.8 lb

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Crown Audio DCI8300N 8-Channel DriveCore Install Series Network Amplifier (300W)”

There are no reviews yet.

Related products