04 3550600
052 7036860
info@techsouq.com
Power Inverter
EATON Tripp Lite Series 1250W Ambulance/EMS Inverter/Charger 12VDC 120VAC 14/55A 2 Out
- 12V DC or 120VAC input; 120V AC output; 2 NEMA 5-15R hospital-grade outlets
- 1250 watts continuous, 1875 watts OverPower™ and 2500 watts DoubleBoost™ inverter output
- 3 stage, 14/55 amp selectable wet/dry cell battery charger
- Auto Transfer Switching option for battery backup / UPS operation – includes wired APSRM4 remote control switch
- Tested to vehicular inverter standards UL458 (USA) and CSA-C22.2 No. 107.1-01 (Canada). Meets GSA Ambulance Specification KKK-A-1822
- Hospital-grade AC plug and GFCI outlets; Anderson quick connect DC wiring terminals
- Meets OSHA requirements
AED15,299.00
The PowerVerter EMS1250UL DC-to-AC Power Inverter with integrated charging system provides automatic, uninterruptible DC-to-AC power for critical on-board equipment. Ideal for installation by ambulance/EMS vehicles. When AC cable is connected to a shore power source, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 14/55 amp selectable charging system. This unit can also function as a UPS system, responding to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Included wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information.
| Category | Attribute | Value |
|---|---|---|
| General Information | Product Name | Tripp Lite Series 1250W Ambulance/EMS Inverter/Charger 12VDC 120VAC 14/55A 2 Out |
| Product Line | PowerVerter | |
| Product Model | EMS1250UL | |
| Product Type | Power Inverter | |
| Technical Information | Plug / Connector Type | NEMA 5-15P |
| Receptacles | 2 x NEMA 5-15R | |
| Power Description | Input Voltage | 12 V DC, 120 V AC |
| Output Voltage | 120 V AC | |
| Maximum Frequency | 60 Hz | |
| Peak Power Load | 2500 W | |
| Continuous Power Load | 1250 W | |
| Waveform Type | Pulse-width Modulated Sine Wave | |
| Physical Characteristics | Height | 7″ |
| Width | 8.8″ | |
| Depth | 9″ | |
| Miscellaneous | Country of Origin | China |
| Environmentally Friendly | Yes | |
| Environmental Compliance | Restriction of Hazardous Substances (RoHS) |
Based on 0 reviews
Be the first to review “EATON Tripp Lite Series 1250W Ambulance/EMS Inverter/Charger 12VDC 120VAC 14/55A 2 Out”
Related products
-
Power Inverter
EATON Tripp Lite Series Industrial Inverter 1250W 12V DC to AC 120V RJ45 5-15R 2Outlet
Power InverterEATON Tripp Lite Series Industrial Inverter 1250W 12V DC to AC 120V RJ45 5-15R 2Outlet
- Allows users to run large, motorized AC appliances from any 12V battery or automotive DC system
- Converts 12V DC battery power to 120V AC power
- 1,250 watts continuous output power
- Peak output power: OverPower (up to 1 hour) – 1875 watts, Double-Boost (up to 10 seconds) – 2500 watts
- 2 outlets; DC input terminals for 12V battery connection
- Frequency control for operating stability
- High-efficiency operation conserves batteries to prolong run time
- Diagnostic LEDs indicate load level (high, medium, and low) and battery charge (high, medium, and low)
- DC fusing protects inverter against overload
- RJ45 port allows connection of APS/PowerVerter Remote Switch (APSRM4)
- Automatic overload shutdown
- Ignition interlock jack
SKU: PV1250FC -
Power Inverter
EATON Tripp Lite Series 2400W Power Inverter/Charger, 24VDC, Auto-Transfer Switching
- Functions as an extended run UPS system, standalone power source and automotive inverter
- Includes hardwire AC input and auto-transfer to enable battery charging and automatic UPS support for blackouts and brownouts
- 2400 watts continuous output power; provides up to twice this rating for momentary startup of inductive loads
- Battery runtime is dependent upon the size and number of user-supplied batteries in 24V configuration
- Hardwire input and output connections supported, DC input terminals for 24V battery connection
- Converts 24V DC to 120V AC
- Frequency control for operating stability
- Advanced 30 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
- Resettable circuit breaker protects APS against system overload
- Switch allows user to select between off, auto-invert and charge-only settings
- 6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
- Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery backup
- Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
- RJ45 port allows connection of APS remote switch (part# APSRM4)
- Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
SKU: APS2424 -
Power Inverter
EATON Tripp Lite Series Compact Power Inverter 3000W 2x 5-15/20R USB Charging w Remote
Power InverterEATON Tripp Lite Series Compact Power Inverter 3000W 2x 5-15/20R USB Charging w Remote
- Provides pure sine wave power for appliances, power tools and other electronics
- Ideal for areas without power outlets, such as construction sites or mobile offices
- NEMA 5-15/20R GFCI outlets + hardwire terminals deliver 3000W continuous output
- USB charging ports keep smartphones, tablets and laptops at full capacity
- Wired remote module extends power control to cab of utility or work truck
SKU: PINV3000SWL-120 -
Power Inverter
EATON Tripp Lite Series 750W Power Inverter/Charger, 12VDC, Auto-Transfer Switching
- Delivers clean 120V AC power from AC or DC power source
- 750W continuous output power; 1500W peak power
- Auto-transfer switching option for UPS operation
- Protects against blackouts, surges and EMI/RFI line noise
- Rugged polycarbonate housing resists moisture and impact
SKU: APS750
There are no reviews yet.