10 in stock
د.إ399.00
10 in stock
EAP150 is a High-power wireless-n Access Point/ WDS Bridge/ WDS AP/ Repeater operates seamlessly in the 2.4GHz frequency spectrum supporting 802.11 b/g/n standard high-speed feature. The smoke detector appearance is designed to blend into various environments, making this model ideal for hotels, schools, or public common areas.
With up to 26dBm wireless transmit power and 150Mpbs data speed rate, EAP150 delivers up to 3x faster speed and 6x extended coverage than 802.11g. Wireless performance is fine-tuned by engineers, so it delivers the best wireless range and speed for clients. EAP150 provides wireless network with superior throughput, performance and unparalleled Wi-Fi coverage.
To protect wireless transmissions, EAP150 encrypts all wireless transmissions through WEP data encryption and supports WPA/WPA2. MAC address filter allows users to setup select or deny stations with access to the network. EAP150 thus is the best product to ensure superior wireless performance.
| User Type | Business |
| Technology | Wireless N |
| Application | Super Long Range ā¢ Indoor |
| Model Number | EAP150 |
KEY DIFFERENTITORS:
HIGH-POWER, LONG-RANGE WI-FI
Up to 26dBm RF Tx power provides greater Wi-Fi coverage over mainstream competitors
WIRELESS-N 3X SPEED OVER 802.11G NETWORKS
Maximum date rate up to 150Mpbs
Backward compatible with 802.11 b/g
AESTHETIC DESIGN
āSmoke Detectorā Design ā Unobtrusive design supports easy mountable to wall and ceiling (accessories included)
Multiple BSSID
Supports up to 4 BSSIDs with blocking SSID broadcast and wireless encryption 64/128-bit WEP, WPA/WPA2
SSID TO VLAN MAPPING
Supports 802.1q mapping of SSIDs up to 4 VLANs
802.3af PoE Compatible
Supports Power over Ethernet (IEEE 802.3af) and allows deployment in areas where power outlets are not available
INTEGRATED ANTENNA
Internal 5dBi antenna with optimized configuration and RF performance
Hardware Specifications
MCU/RF: RTL8196C + RTL8188RE
Memory: 32MB
Flash: 4MB
Physical Interface:
LAN: 1 x 10/100 Fast Ethernet RJ-45
Reset Button
Power Jack
LEDs Status
Power/Status
LAN (10/100Mpbs)
WLAN (Wireless connection)
Power Requirement:
Power Supply: 90 to 240 VDC Ā± 10%, 50/60 Hz
Active Ethernet (Power over Ethernet, IEEE802.3af)
48 VDC/0.375A
Device: 12V/1A
RF Specifications
Wireless Standard: IEEE802.11 b/g/n
Frequency: 2.400 ~ 2.484GHz (b/g/n)
Modulation Technologies:
OFDM: BPSK, QPSK, 16-QAM, 64-QAM
DBPSK, DQPSK, CCK
Operating Channels: 11 channels
Transmit Power:
802.11b(2.412 ~ 2.472 GHz)
|
26 dBm @ 1Mbps |
|
26 dBm @ 2Mpbs |
|
26 dBm @ 5.5Mbps |
|
26 dBm @ 11Mbps |
802.11g(2.412 ~ 2.472 GHz)
|
26 dBm @ 6Mbps |
|
26 dBm @ 9Mbps |
|
25 dBm @ 12Mbps |
|
25 dBm @ 18Mbps |
|
24 dBm @ 24Mbps |
|
24 dBm @ 36Mbps |
|
23 dBm @ 48Mbps |
|
23 dBm @ 54Mbps |
802.11n(2.412 ~ 2.472 GHz)
|
26 dBm @ MCS0/MCS8 |
|
26 dBm @ MCS1/MCS9 |
|
25 dBm @ MCS2/MCS10 |
|
25 dBm @ MCS3/MCS11 |
|
24 dBm @ MCS4/MCS12 |
|
24 dBm @ MCS5/MCS13 |
|
23 dBm @ MCS6/MCS14 |
|
23 dBm @ MCS7/MCS15 |
Receive Sensitivity:
802.11b (2.412 ~ 2.472 GHz) best ā¤ -90 dBm
802.11g (2.412 ~ 2.472 GHz) best ā¤ -88 dBm
802.11n (2.412 ~ 2.472 GHz) best ā¤ -85 dBm
Antenna:
Embedded omnidirectional antenna (Diversity support)
Antenna Gain = 5 dBi
Software Specifications
Topology:Ā Infrastructure/Ad-Hoc
Operation Mode: Access Point/WDS Bridge/WDS AP/Repeater
Multiple BSSID:Ā Supports up to 4 BSSIDs
LAN Settings:
IP (check validity and DHCP server IP range)
MAC
DHCP range, lease time, client list
VLANs:Ā Supports 802.1q (up to 4 VLANs)
SSID to VLAN mapping
Spanning Tree:Ā Supports 802.1d Spanning Tree Protocol
Wireless mode: 11b/11g/11n
Channel selection (setting varies by country)
Channel bandwidth (Auto, 20MHz, 40MHz)
Transmission rate: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only
VPN:Ā VPN pass-through (PPTP, L2TP, IPSEC)
QoS:Ā WMM
WPS:Ā Software only
Security:Ā WEP Encryption – 64/128 bit
WPA Personal (WPA-PSK using TKIP or AES)
WPA Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
SSID broadcast enable/disable
MAC Address Filter (AP mode)
WLAN L2 isolation (AP mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)
Management
Tx Power Control:Ā Adjust transmit power by dBm
Configuration:Ā Web-based configuration (HTTP)/Telnet
Telnet Server:Ā CLI
Firmware Upgrade:Ā Upgrade firmware via web browser
Administrator Setting:Ā Administrator Username & Password change
Reset Setting
Reboot (press 1 second). Reset to Factory Default (press 10 second)
System Monitoring:Ā Status Statistic and Event log
SNMP:Ā V1 , V2c
MIB:Ā MIB I , MIB II(RFC1213) and Private MIB
Traffic Measurement:Ā Per interface
Auto-channel Selection:
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
Backup & Restore:
Save & restore settings through Web interface
Diagnosis:Ā IP pinging statistics
Environment & Physical
Temperature Range:
Operating: 0 to 50Ā° C (32Ā° to 122Ā° F)
Storage: -20 to 60Ā° C (-4Ā° to 140Ā° F)
Humidity (non-condensing):
Operating: 90% or less
Storage: 90% of less
Dimensions:Ā Diameter: 4.73ā (120mm)
Height: 1.97ā (50mm)
Weight:Ā 0.62 lb. (280g)
Certifications: FCC, CE, IC
Behringer Xenyx X1204USB Premium 12-Input 2/2-Bus Mixer with USB 
Blackmagic Design Fairlight HDMI Monitor Interface 
04 3550600
052 7036860
There are no reviews yet.