Features
Software Features |
Router And Gateway |
|
Topology |
Infrastructure |
Operation Mode |
AP / Router / WDS |
LAN |
– DHCP Server – Static Routing Table |
WAN |
– PPTP – PPPoE – Static IP – DHCP Client – Clone MAC |
Router |
– NAT/ NAPT – Static Routing – Dynamic Route – Virtual server mapping – IP address mapping – Port Forwarding – Port Triggering – Special application – ALG(Application Layer Gateway) support (RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP) – DNS Relay – DDNS – Time Zone(NTP client) |
Firewall |
– Blocking Ping – DoS(Blocking Ping, Port scan, Sync Flood) – MAC / IP Filtering – ICMP Blocking – SPI (Stateful Packet Inspection) – DMZ (Demilitarized Zone) Host – Policy Based Parental Controls – Port Range / Service Filtering – Internet Domain Restriction – URL Filtering |
VPN |
VPN pass-through (PPTP, L2TP, IPSEC) |
Wireless |
– Power saving(Green technology) – Multiple SSID – 64/128 bit WEP Encryption – WPA Personal (WPA-PSK using TKIP or AES) – WPA Enterprise (WPA-EAP using TKIP) – 802.1x Authenticator – Hide SSID in beacons – Wi-Fi Protection Setup (WPS) – WDS – ACL control – Best channel selection – Speed/Bandwidth monitor |
QoS |
– WMM – Application base – Priority Queue – Bandwidth Allocation |
Ā |
Ā |
Management |
|
Configuration |
Web-based configuration (HTTP) |
Firmware Upgrade |
– Via webpage upgrade – Auto recovery once firmware upgrade fail |
Administrator Setting |
Administrator password change |
Reset Setting |
– Reboot – Reset to Factory Default |
System monitoring |
Speed and Bandwidth monitoring |
Scheduling |
– Enable Firewall – Enable power saving |
Easy access |
User can type model name and access the main page. |
Install wizard |
Guide user to set-up Router smoothly |
Technical Specifications |
Hardware Specifications |
|
Memory |
32MB SDRAM |
Flash |
4MB |
Physical Interface |
WAN: 1 * 10/100 Fast Ethernet RJ-45 |
LAN: 2 * 10/100 Fast Ethernet RJ-45 |
|
Rest button |
|
Power Jack |
|
WPS (WiFi Protected Setup) |
|
USB (for 3G data card) |
|
LEDs Status |
Power Status |
WAN (Internet connection) |
|
10/100Mbps LAN1 & LAN2 |
|
WLAN(Wireless connection) |
|
3GĀ networks |
|
Power Requirements |
Power Supply: 200 to 240 VDC ± 10ļ¼ Ā (ETSI) 100 to 120 VDC ± 10ļ¼ Ā (FCC) |
Device: 12V/1.25A |
Note:
1.Ā Ā Ā Ā Ā WAN can either be USB port or WAN port. USB is the default WAN.
2.Ā Ā Ā Ā Ā RAM and Flash design should be flexible to cover SOHO and ISP purpose.
Top Panel (LED status) |
|
Power |
1 ( On-> orange Test/reset default->blink)Ā Ā Ā Ā |
3G |
1 ( Link-> blue on) |
WAN |
1 ( Link-> blue on, traffic->blink) |
Internet |
1 ( Link-> blue on) |
There are no reviews yet.