04 3550600 052 7036860
EnGenius M2000
EnGenius M2000

EnGenius M2000

Availability:

4 in stock
Add to Wishlist

د.إ419.00

4 in stock

Add to Wishlist

MESH2000 is a long range outdoor wireless Access Point / Client Bridge with mesh function thatĀ operates seamlessly in the 2.4GHz frequency and provides high bandwidth up to 108Mbps withĀ Turbo G. It features high transmitted output power and high receivable sensitivity. High outputĀ power and high sensitivity can extend range Ā and coverage to reduce the roaming betweenĀ Access Points to get a more stable wireless connection. Based on mesh function, it can be usedĀ to establish mesh network, reduces the expense of equipment and risk of disconnection.

It supports distance control and RSSI indicator which enables the best transmission and
receives signals for traffic communication. This product comes with PoE injector for building in
outdoor environment easily.Ā To protect your wireless connectivity, it can encrypt all wireless transmissions through 64/128-bit
WEP data encryption and also supports WPA/WPA2. The MAC address filter lets you selectĀ exactly which stations should have access to your network. In addition, the User Isolation functionĀ can protect the private network between client users.Ā The attractive design, high performance, and array of features make MESH2000 a suitableĀ wireless solution for your residence or office.

FEATURES

Wireless

– Ā  2.4GHz Ā  It works in 2.4GHz frequency spectrum.
– Ā  MESH Ā  Ā It is designed to establish a network with best link reliability under harsh outdoor environment.Ā There is not any limitation on transmission and network communication. In this mode for better performance,recommended 1 GatewayĀ with 4 Relay in linear and radiative deployment scenario.
– Ā  High output power Ā  Ā Transmit high output power programmable for different country selections.
– Ā  High Data Rate Ā  Ā High speed transmitting rate up to 108Mbps with Super G, support large payload such as MEPG video streaming.
– Ā  Multifunction application Ā  Ā Access Point/Client Bridge/Client Router/WDS Function/MESH.
– Ā  Long range transmitting Ā  Ā Transmit power control and distance control (ACK timeout).
– Ā  Narrow Bandwidth Ā  Ā Provide 5MHz/10MHz/20MHz bandwidth selection.
– Ā  Signal Strength Display Ā  Ā RF signal strength status shown LEDs of 3 colors, making network build-up easier. LED indicators have
the best transmit and receive signal for traffic communication.
– Ā  Multiple SSID Ā  Ā 4 SSID supported. Each SSID can set itself wireless or WAN access setting.
– Ā  QoS(WMM) Ā  Ā Enhance performance and density.

Networking

– Ā  PPPoE & PPTP Ā  Ā Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed orĀ disconnected. Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks.
– Ā  Traffic Shaping Ā  Ā Traffic shaping is the control of network traffic in order to optimize or guarantee performance.
– Ā  VPN Pass Through

Security

– Ā  802.11i Ā WEP, WPA, WPA2 (Encryption support TKIP/AES)
– Ā  MAC address functions Ā MAC address filter (AP mode)
– Ā  802.1x Ā IEEE802.1x Authenticator
– Ā  Station isolation

Management

– Ā  802.11i Ā & 802.1x Ā  Ā WEP, WPA, WPA2 (Encryption support TKIP/AES), IEEE802.1x Authenticator
– Ā  MAC address functions Ā MAC address filter (AP mode) up to 50
– Ā  AP Detection Ā  Ā Scan all neighboring APs with their channels and signal strengths
automatically for best operated channel selection onĀ installing
– Ā  Firmware Upgrade Ā Upgrading firmware via web browser, setting are reserved after upgrade
– Ā  Reset & Backup Ā Reset to factory default. User can export all setting into a file via WEB
– Ā  Ping & Trace Route Ā Built-in PING function & Trace Route function in Web GUI
– Ā  MIB Ā MIB I, MIB II(RFC1213) and Private MIB
– Ā  SNMP Ā V1, V2

TECHNICAL SPECIFICATION

> Hardware specification

MCU/RF Atheros AR2316 Single Chip
Memory 32MB SDRAM
Flash 8MB
Physical Interface One 10/100 Fast Ethernet RJ-45
One Reset Button
One SMA Connector
One switch (external and internal antenna switching)
LED indicators Power/ Status
LAN (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
ļ‚— Green: Good Quality
ļ‚— Yellow: Marginally Acceptable Quality
ļ‚— Red: Bad Quality
Power Requirements Active Ethernet (Power over Ethernet) Proprietary PoE design
Power Adapter 24V / 0.6A DC

> RF Specification

Frequency Band Ā 802.11b/g
2.412~2.472GHz
Modulation Technology OFDM = BPSK, QPSK, 16-QAM, 64-QAM
DSSS = DBPSK, DQPSK, CCK
Operating Channels Ā 802.11b/g
11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical) Ā  802.11g
-92 dBm @ 6Mbps
-74 dBm @ 54Mbp
802.11b
-97 dBm @ 1Mbps
-89 dBm @ 11Mbps

SOFTWARE FEATURES

> GENERAL

Topology Infrastructure
Protocol / Standard IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
Operation Mode Ā 802.11 b/g
Access Point
Client Bridge
Client Router
WDS AP/CB
Mesh Function
LAN DHCP Server
DHCP Client
VPN VPN ā€“ pass through

Wireless

channel Selection (Setting varies by countries)
Transmission Rate
11 b/gļ¼š54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Super G : 108 Mbps
Long distance transmission : 1km to 30km
Transmit power table
Antenna Diversity with Dual Polarization
Signal Strength indication using LEDs
Auto Channel Selection
AP Detection
Traffic Shaping
PPPoE(CR mode) and PPTP
Narrow Bandwidth 5MHz/10MHz/20MHz Support
PING function and Trace Route function
MSSID Support
VLAN Support

Security

WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS WMM

> MANAGEMENT

Configuration Web-based configuration (HTTP)
Firmware Upgrade
– Upgrade firmware via web-browser
– Keep latest setting when f/w update
Administrator Setting Administrator password change
Reset Setting
– Reboot (Press 1 second)
– Reset to Factory Default (Press 5 seconds)
System monitoring Status, Event Log
SNMP V1, V2c
MIB MIB I, MIB II (RFC1213) and Private MIB
Backup & Restore Settings through Web
Time setting
NTP (Auto-setting of time)
Time setting manually
SKU: M2000 Category: Tags: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EnGenius M2000”

There are no reviews yet.

Related products