Evertz Microsystems Single-Fiber DVI Extension Kit


Evertz Microsystems DVI-EXTNDĀ Overview

TheĀ Single-Fiber DVI Extension KitĀ fromĀ EvertzĀ MicrosystemsĀ consists of a transmitter module and a receiver module, each with one SC-type connector for the fiber input and a DVI-D single-link plug for the video interface. The modules support a single-fiber extended transport of DVI signal to up to 3280’ over single-mode fiber, or 1640’ over multi-mode fiber, which allows users the flexibility to customize the cable length to their specific application.

Signals can be extended over 50/125µm on single-mode, and 62.5/125µm on multi-mode fiber cable. The link supports up to WUXGA (1920 x 1200) at 60 Hz resolutions, and includes support for all resolutions supported by the VIP, VIP Advanced, and VIP-X products. The transmitter module can be powered by either the VIP module via +5V pin on the DVI connector, or by an AC/DC power adapter on the transmitter fiber module. The receiver module is powered from an AC/DC power adapter.

  • Extends digital video signals up to 3280’ using single-mode fiber, or 1640’ over multi-mode fiber
  • Secure data without RFI/EMI emission or loss of video quality
  • DVI-D single-link support
  • Support resolutions up to 1920 x 1200 at 50 and 60 Hz
  • Detachable modules allow for easy assembly without the need to string connectors through conduit, walls, or ceilings
  • Self-EDID programming

Evertz Microsystems DVI-EXTNDĀ Specs

Input and Output Connectors DVI Standard Compliant: Supports DVI 1.0, fully implemented by fiber optic and DDC2B by virtual DDC
Graphic Transmission Bandwidth: 1.65 Gb/s per graphic channel
DVI-D single-link
Optical Minimum: 10.5 dB
Optical Rise/Fall Time: 200 ps
Connector Type SC type (both mating ends)
Fiber Cable Supported 50/125 µm multi-mode or single-mode fiber
62.5/125 µm multi-mode or single-mode fiber
Optical Power Peak Optical Power per Channel: -2.0 dBm
Amplitude Optical Modulation Amplitude: 300 µW (per channel)
Wavelength Range 850 nm nominal
Voltage +5 V, 2 A
Operating Temperature 32 to 122°F / 0 to +50°C
Humidity 5 to 85%
Dimensions 1.5 x 0.6 x 2.6″ / 3.9 x 1.5 x 6.8 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Evertz Microsystems Single-Fiber DVI Extension Kit”

There are no reviews yet.