Fujitsu MAX3073RC SAS Hard Disk

Capacity: 73GB
Spindle Speed: 15,000RPM
Interface Type: SAS / Serial Attached SCSI
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 147
Average Seek Time (read/write ms): 3.3 /3.8
Electrical Interface Speed: SAS / Serial Attached SCSI – 3.0Gbps
On-Board Cache: 8MB

Form Factor	3.5-inch x 1-inch high
	Mounting screws	6#32UNC
	Seek time (track to track)	Read 0.2 / Write 0.4 milliseconds
	Seek time (average)	3.3/3.8 milliseconds (read/write)
	Seek time (full track)	8.0/9.0 milliseconds (read/write)
	Average latency time	2.00 milliseconds
	Rotational speed	15,000 RPM
	Data Buffer Size	8 MB
	Recording code	32/34 MEEPRML
	Interface	SAS (3Gbps)
	Head positioning method	ROTARY VCM
	Spindle start time	30 seconds typical
	Spindle stop time	30 seconds typical
	Power requirement Idle (ready)	11.5 W (typical)
	Height	25.4 millimetres
	Width	101.6 millimetres
	Depth	146.0 millimetres
	Weight	0.75 kg
	Ambient temperature (operating)	5 to 55 degrees C
	Ambient temperature (non-operating)	-40 to 70 degrees C
	Maximum DE surface temperature (operating)	55 max deg. C
	Gradient	15 degrees C per hour
	Relative humidity (operating)	5 to 95 % RH (non-condensing)
	Relative humidity (non-operating)	5 to 95 % RH (non-condensing)
	Maximum wet bulb	29 degrees C (non-condensing)
	Vibration (operating)	0.6mm (5 to 20 Hz)/ 1.0G (20 to 300 Hz)
	Vibration (non-operating)	3.1mm (5 to 20 Hz)/ 5.0G (20 to 300Hz)
	Shock (operating)	65G Max (2ms)
	Shock (non-operating)	250G Max (2ms)
	Altitude (operating)	3,000 metres
	Altitude (non-operating)	12,000 metres
	Acoustic noise (at 1 metre idle)	3.6 bels
	MTBF (Mean Time Between Failures)	1,200,000 power on hours
	Component life (years) Design life used to calculate MTBF. NOT Warranty	5 years
	Unrecoverable errors	1 per 10^15 bits read
	Seek errors	10 per 10^8 seeks