Fujitsu Mobile MHW2080BJ SATA Hard Drive
Capacity: 80GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 2.5″x9mm (Fits in ALL laptops)
Sustained Throughput (MBps):Ā
Average Seek Time (read/write ms): 10.5 / 12.5
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 8MB
Fujitsu raises the bar on mobile computing performance with the introduction of its first 7,200RPM, 2.5-inch hard disk drives using PMR technology. High-end notebook manufacturers have been experiencing demand for faster data access and higher disk drive capacities. The new Fujitsu 7,200RPM models satisfy both requirements, allowing manufacturers to offer true high performance mobile computing solutions.
Engineered to deliver high performance and high capacity in a small form factor, the mobile series retains the outstanding level of quality and reliability for which Fujitsu is renowned. These 7,200 RPM mobile HDDs deliver a low typical average read seek time of 10.5ms and a low average latency of 4.17ms. Featuring up to 160GB of storage space, low power consumption and acoustic noise, these 2.5-inch SATA hard disk drives are an excellent choice for todayās ultra-fast, high-capacity notebook computers.
Drive specification | MHW2080BJ |
Formatted Gbytes (512 bytes/sector) | 80 |
Bytes per sector | 512 |
Spindle speed (RPM) | 7,200 |
I/O data transfer rate (Gb/sec max) | 3.0 |
Cache buffer | 8 Mbytes |
Height (max) | 9.5 mm (0.37 inches) |
Width (max) | 70 mm (2.8 inches) |
Length (max) | 100 mm (3.9 inches) |
Weight (max) grams | 116 |
Track-to-track seek time (msec typical) | 1.5 |
Average seek, read (msec typical) | 10.5 |
Average seek, write (msec typical) | 12.5 |
Startup current (typical) 12V (peak) | 1.1 amps |
Operating power (typical) watts | 2.3 |
Idle mode (typical) watts | .8 |
Standby mode (typical) watts | .13 |
Sleep mode | .13 |
Ambient temperature | 5° to 55 °C (op.)
ā40° to 65 °C (nonop.) |
There are no reviews yet.