04 3550600 052 7036860

Gefen 4K Multi-Format 2×1 HDBaseT Sender with Scaler, Auto-Switching, and PoH

Add to Wishlist
  • Transmit UHD/DCI 4K 130′ / 1080p 230′
  • Manual/Auto-Switchable HDMI / VGA Inputs
  • Independent 3.5mm Audio Input
  • VGA Upscaling to Widescreen WUXGA
  • RS-232 and Two-Way IR Signal Extension
  • Bidirectional PoH (Power-over-HDBaseT)
  • HDCP 2.2 and 1.4
  • Advanced EDID Management
  • LPCM 7.1, Dolby, DTS:X, and DTS-HD Audio
  • 3DTV / CEC / Lip Sync Pass-Through

2,199.00 د.إ

Add to Wishlist

The Gefen 4K Multi-Format 2×1 HDBaseT Sender allows you to transmit UHD or DCI 4K 30 Hz signals up to 130′ and 1080p60 signals up to 230′ to an optional receiver over a single CAT5e cable, sold separately. It features individual HDMI and VGA inputs and lets you switch between them manually via the front panel or RS-232 or set up automatic switching. An independent 3.5mm audio input is available for running L/R audio with the VGA signal. VGA signals with lower resolutions than WUXGA and a legacy aspect ratio can be scaled to widescreen WUXGA. This allows for higher-resolution output as well as more seamless transitions when switching between HDMI and VGA inputs.

RS-232 and two-way IR signals can also be extended, and 3rd-party RS-232 controllers can be used for switching, scaling, EDID management, and volume and other controls. The transmitter and optional receiver can be powered from only one of the units via bidirectional PoH (Power-over-HDBaseT), over the same CAT5e cable used for signal extension. The transmitter has a compact design and can be surface-mounted or hidden away under a desk via the included mounting brackets. The device uses Gefen’s implementation of HDBaseT technology, with enhancements including advanced EDID management.

Note:

A shielded (STP) CAT5e or better cable is recommended. An unshielded (UTP) cable may be acceptable depending on cable quality.
Key Features
  • Transmit HDMI, VGA with analog audio, and RS-232 signals over a single CAT5e cable
  • Compatible receiver: EXT-UHDA-HBTL-RX
  • Send UHD 4K (at 30 Hz, 8-bit, 4:4:4) up to 130′
  • DCI 4K transmission (at 24/30 Hz, 8-bit, 4:4:4) up to 130′
  • 1080p60 or WUXGA 60 Hz transmission (up to 12-bit) up to 230′
  • HDMI input: up to 18 Gb/s data throughput and 600 MHz TMDS clock
  • HDBaseT input: up to 10.2 Gb/s data throughput and 300 MHz TMDS clock
  • Automatic switching of 4K HDMI and VGA
  • Manual switching of 4K HDMI and VGA via front-panel button or RS-232
  • VGA scaling up to 1920 x 1200 with picture adjustments
  • HDMI 2.0
  • HDCP 2.2 and 1.4
  • 12-bit deep color (at 1080p)
  • LPCM 7.1, Dolby Atmos, Dolby TrueHD, DTS:X, and DTS-HD Master Audio pass-through
  • 3DTV pass-through
  • CEC pass-through
  • Lip Sync pass-through
  • Analog L/R audio input for VGA
  • RS-232 control of switching, scaler, and EDID management functions
  • Bidirectional RS-232 extension / two-way IR extension when used with a compatible receiver
  • Bidirectional Power-over-HDBaseT (PoH)
  • HDBaseT technology with Gefen-enhanced features
  • Advanced EDID management for rapid integration of source and display
  • Field-updateable firmware via mini-USB port, using the Gefen Syner-G software
  • Locking power connector
  • Compact, ultra-low-profile enclosure (can be surface-mounted or installed hidden away)
  • 3-pin Phoenix connector (installed)
  • LED indicators
SKU: EXT-UHDV-HBTLS-TX Category: Tag:
TMDS Clock Frequency
HDMI Input: 600 MHz
Extension System: 300 MHz
Bandwidth
HDMI Input: 18 Gb/s
Extension System: 10.2 Gb/s
Video Inputs
1 x HDMI Type A
1 x VGA HD-15
Audio Input
1 x 1/8″ / 3.5 mm TRS
Link Connector
1 x RJ-45, Shielded
RS-232
1 x 3-Pin Phoenix
IR Input
1 x 1/8″ / 3.5 mm TRS
IR Output
1 x 1/8″ / 3.5 mm TS
Transmission Distance
DCI 4K (at 24/30 Hz, 8-Bit, 4:4:4) up to 130′ / 40 m
UHD 4K (at 30 Hz, 8-Bit, 4:4:4) up to 130′ / 40 m
1080p (at 60 Hz, up to 12-Bit) up to 230′ / 70 m
WUXGA (at 60 Hz, up to 12-Bit) up to 230′ / 70 m
Firmware Update Port
Mini-USB Type B
Power Connector
5.5 mm Barrel/2.1 mm Pin, Locking
Power Supply Input
12 VDC
Power Consumption
9 W Maximum without Receiver
22 W Maximum with Receiver
Operating Temperature
32 to 122°F / 0 to 50°C
Storage Temperature
-4 to 185°F / -20 to 85°C
Operating Humidity
5 to 90%, Non-Condensing
Storage Humidity
0 to 95%, Non-Condensing
MTBF
50,000 Hours
Dimensions
7.7 x 0.93 x 4″ / 19.5 x 2.4 x 10 cm (without Mounting Brackets or Connectors)
8.7 x 0.93 x 4″ / 22 x 2.4 x 10 cm (with Mounting Brackets, No Connectors)
Weight
0.8 lb / 350 g
Packaging Info
Package Weight
1.875 lb
Box Dimensions (LxWxH)
10.4 x 9.2 x 3.1″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Gefen 4K Multi-Format 2×1 HDBaseT Sender with Scaler, Auto-Switching, and PoH”

There are no reviews yet.

Related products