Hewlett Packard 18GB 10K U160 80pin SCA-2 SCSI Hard Drive 5064-2454 – Refurbished
The Hewlett Packard 5064-2454 has the following standard features:
⢠Integrated Ultra/Ultra2 SCSI controller (ST318203 and ST39103 models)
⢠Integrated Ultra160 SCSI controller (ST318233 and ST39133 models)
⢠Multimode SCSI drivers and receiversāsingle-ended (SE) and low voltage differential (LVD)
⢠16 bit I/O data bus
⢠Asynchronous and synchronous data transfer protocol
⢠Firmware downloadable via SCSI interface
⢠Selectable even byte sector sizes from 512 to 4,096 bytes/sector
⢠Programmable sector reallocation scheme
⢠Flawed sector reallocation at format time
⢠Programmable auto write and read reallocation
⢠Reallocation of defects on command (post format)
⢠Enhanced ECC correction capability up to 185 bits
⢠Sealed head and disc assembly
⢠No preventative maintenance or adjustment required
⢠Dedicated head landing zone
⢠Embedded servo design
⢠Self diagnostics performed when power is applied to the drive
⢠1:1 Interleave
⢠Zoned bit recording (ZBR)
⢠Vertical, horizontal, or top down mounting
⢠Dynamic spindle brake
⢠1,024 kbyte data buffer (4,096 kbytes on LWV/LCV models)
⢠Hot plug compatibility (Section 9.6.4.2 lists proper host connector needed) for āLCā and āLCVā model drives
⢠SCAM (SCSI Configured Automatically) plug-n-play level 2 compliant, factory set to level 1
Media characteristics
⢠The media used on the drive has a diameter of approximately 3.3 inches (84 mm).
⢠The aluminum substrate is coated with a thin film magnetic material, overcoated with a proprietary protective layer for improved durability and environmental protection.
Performance
⢠Programmable multi-segmentable cache buffer (see Section 3.1)
⢠10,016 RPM spindle. Average latency = 2.99 ms
⢠Command queuing of up to 64 commands
⢠Background processing of queue
⢠Supports start and stop commands (spindle stops spinning)
Reliability
⢠1,000,000 hour MTBF
⢠LSI circuitry
⢠Balanced low mass rotary voice coil actuator
⢠Incorporates industry-standard Self-Monitoring, Analysis and Reporting Technology (S.M.A.R.T.)
There are no reviews yet.