04 3550600
052 7036860
info@techsouq.com
Hitachi 0F12460 / HDS5C3030ALA630 3TB 3.5in 6Gbps 5.7K RPM Deskstar 5K3000 SATA HDD – Brand New
Hitachi 0F12460 / HDS5C3030ALA630 3000GB 3.5″ 6.0 Gbps 5700 RPM Deskstar 5K3000 Serial Advanced Technology Attachment Hard Disk Drive – Brand New
Alt MPN: HDS5C3030ALA630
General features
- Data capacities of 3TB
- Spindle speeds of 5700 RPM
- Fluid Dynamic Bearing motor
- Dual Stage Actuator
- Serial ATA interface
- Sector format of 512 bytes/sector
- Closed-loop actuator servo
- Load/Unload mechanism, non head disk contact start/stop
- Automatic Actuator lock
- Sector Buffer size of 32MB
- Ring buffer implementation
- Write Cache
- Native command queuing support
- Automatic Error Recovery procedures for read and write commands
- Self Diagnostics on Power on and resident diagnostics
- Serial ATA Data Transfer 6 Gbps
- CHS and LBA mode
- Power saving modes/Low RPM idle mode (APM)
- S.M.A.R.T. (Self Monitoring and Analysis Reporting Technology)
- Support security feature
- 48 bit addressing feature
- Adaptive zone formatting
- RVS(Rotational Vibration Safeguard)
- SATA-2.6 compliant
- Support TCG Opal SSC (specific model only)
| Weight | 0.690 kg |
|---|
| SPECIFICATIONS | |
|---|---|
| Model number | 0F12460 |
| Alt Model Number | HDS5C3030ALA630 |
| Model type | Deskstar |
| PHYSICAL LAYOUT | |
| Label capacity | 3TB/3000GB |
| Bytes per Sector | 512 |
| LOGICAL LAYOUT | |
| Number of Heads | 16 |
| Number of Sectors/Track | 63 |
| Number of Cylinders | 16,383 |
| Number of Sectors | 5,860,533,168 |
| Total Logical Data Bytes | 3,000,592,982,016 |
| DATA SHEET | |
| Max Data transfer rate (Mbps) | 1319 |
| Interface transfer rate (MB/s) | 600 |
| Typ Sustained transfer rate (MB/s) | 119 |
| Data buffer size (MB) | 32 |
| Rotational speed (RPM) | 5700 |
| Number of buffer segments (read) | 128 |
| Number of buffer segments (write) | 70 |
| Recording density – max (Kbpi) | 1452 |
| Track density (Kbpi) | 255 |
| Areal density – max (Gbits/in) | 370 |
| COMAND OVERHEAD | |
| Read (Cache not hit) Typical time (ms) Typical time for command (ms) |
0.5 0.5 |
| Read (Cache hit) Typical time (ms) Typical time for command (ms) |
0.1 0.2 |
| Write Typical time (ms) Typical time for command (ms) |
0.015 0.2 |
| Seek Typical time (ms) Typical time for command (ms) |
0.5 Not applicable |
| AVERAGE SEEK TIME | |
| Read Typical (ms) Max (ms) |
14.0 15.0 |
| Write Typical (ms) Max (ms) |
15.0 16.0 |
| SINGLE TRACK SEEK TIME | |
| Read Typical (ms) Max (ms) |
0.8 1.5 |
| Write Typical (ms) Max (ms) |
1.3 2.0 |
| AVERAGE LATENCY | |
| Rotational speed | 5700 RPM |
| Time for a recolution (ms) | 10.5 |
| Average latency (ms) | 5.26 |
| DRIVE READY TIME | |
| Power on to ready 5 Disk model Typical (sec) Madimum (sec) |
20 30 |
| TEMPERATURE AND HUMIDITY | |
| Operating conditions Temperature Relative humidity Maximum wet bulb temperature Maximum temperature gradient Altitude |
5 to 60Ā°C 8 to 90% non-condensing 29.4Ā°C non-condensing 20Ā°C/Hour -300 to 3,048 m |
| Non-Operating conditions Temperature Relative humidity Maximum wet bulb temperature Maximum temperature gradient Altitude |
-40 to 70Ā°C 5 to 95% non-condensing 35Ā°C non-condensing 30Ā°C/Hour -300 to 12,000 m |
| INPUT VOLTAGE | |
| +5 Volts Supply During run and spin up Absolute max spike voltage Supply rise time |
5V Ā± 5% -0.3 to 5.5V 0 to 5sec |
| +12 Volts Supply During run and spin up Absolute max spike voltage Supply rise time |
12V +10% -8% -0.3 to 15.0V 0 to 5sec |
| PHYSICAL | |
| Height (mm/in) | 26.1/1.0276 |
| Width (mm/in) | 101.85/4.0098 |
| Length (mm/in, max) | 147/5.7874 |
| Weight (lb/g, max) | 1.5212/690 |
| ACOUSTICS | |
| Idle | 2.5/3.0 |
| Operating Performance seek mode Quiet seek mode |
N/A> 2.6/3.1 |
There are no reviews yet.