Modular Ethernet Switches

HP 5406-44G-PoE+-4G-SFP v2 zl Switch with Premium Software(J9539A)

The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion.

With 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE; integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.        

Features

Software-defined networking

OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths

Quality of Service (QoS)

Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis

Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers

Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues

Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.

Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ

Management

Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch located anywhere on the network

RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events

IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications

Uni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops

Management simplicity: provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl switches)

Connectivity

IEEE 802.3az Energy Efficient Ethernet: lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)

IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras

IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras

Prestandard PoE support: detects and provides power to prestandard PoE devices; see the list of supported devices in the product FAQ at www.hp.com/networking

High-density port connectivity: provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per system

Address table size 64000 entries Form Factor 4U height Input Frequency 50/60 Hz Input Voltage 110 – 127 / 200 – 240 VAC Management features HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C) Manufacturer Warranty Lifetime, advance replacement, next business day Ports 44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);Media Type: Auto-MDIX;Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only; 4 open mini-GBIC slots; 4 open module slots; Supports a maximum of 32 10GbE ports or 140 autosensing 10/100/1000 ports or 100 mini-GBICs, or a combination; Included Power consumption 215 W (standby) Power features One J9306A product is installed. One open power supply slot is available; three different power supplies are available. See power supply products for additional specifications.; Heat dissipation does not include heat dissipated by the PoE-powered devices themselves. Product dimensions (W x D x H) 17.5 x 17.75 x 6.9 in Technical Notes When using mini-GBICs with this product, mini-GBICs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C) are required. Warranty Lifetime, advance replacement, next business day Weight ( Imperial ) 45.58 lb Weight ( Metric ) 20.68 kg

 

Extended specifications

 

I/O Expansions

Number of Total Expansion Slots 6

 

Network & Communication

Layer Supported 3

 

Management & Protocols

Manageable Yes Management HP ProCurve Manager PCM+ Web-based Management VLAN QoS DHCP SNMP v1, v2c, v3 RMON 1, 2, 3, 9 Telnet CLI

 

Memory

Standard Memory 256 MB Memory Technology DDR SDRAM Flash Memory 4 MB

 

Power Description

PoE (RJ-45) Port Yes Input Voltage 110 V AC 220 V AC Power Source Power Supply Redundant Power Supply Yes

 

Physical Characteristics

Compatible Rack Unit 4U Form Factor Rack-mountable Desktop Height 6.9″ Width 17.5″ Weight (Approximate) 45.59 lb Depth 17.8″

 

Miscellaneous

Green Compliant Yes Green Compliance Certificate/Authority RoHS