04 3550600 052 7036860
Huawei S2300 Series Switch LS-S2309TP-EI-DC
Huawei S2300 Series Switch LS-S2309TP-EI-DC
,

Huawei S2300 Series Switch LS-S2309TP-EI-DC

Availability:

30 in stock
Add to Wishlist

AED1,299.00

30 in stock

Add to Wishlist

Huawei S2300 Series Switch LS-S2309TP-EI-DC

 

LS-S2309TP-EI-DC Overview

  • Huanetwork Lab has Huawei X300 series switch ready for customer remote login test
  • DC Power
  • Non-POE Switch
  • Layer 2 Ethernet Switch
  • Gross Weight: 3kgs
  • 8*10/100Base-TX ports, 1*10/100/1000Base-T or 100/1000Base-X port
  • Software: Enhanced Version
  • LS-S2309TP-EI-DC doesn’t come with mounting kit

Huawei Quidway S2300 series switches are intelligent access switches for telecom customers. The S2300 is mainly deployed on the intranets and IP Metropolitan Area Network, carrying various Ethernet services. Huawei S2300 supports powerful lightning protection, ACLs, QinQ, 1:1 VLAN switching and N:1 VLAN switching etc. Huanetwork keeps almost all Huawei S2300 series switches in stock and can ship to worldwide customers.

LS-S2309TP-EI-DC Specification and Datasheet

Specification
Fixed port 8*10/100Base-TX ports, 1*10/100/1000Base-T or 100/1000Base-X port
Processor Dominant frequency: 200 MHz
Switching capacity 3.6 Gbit/s
Forwarding performance 2.68 Mpps
DDR memory 64 MB
Flash Memory 16 MB
Forwarding performance 2.7 Mpps
Port switching capacity 3.6 Gbit/s
Backplane switching capacity 32 Gbit/s
MAC address table Supports 8 K MAC address entries.
Supports manual addition and deletion of a MAC address table.
Supports conļ¬guration of MAC address aging time.
Supports disabling of MAC address learning based on port or aggregation group.
Supports limit on the number of MAC addresses to be learned on a port.
Supports blackhole MAC addresses.
VLAN features Supports IEEE 802.1Q (VLAN) and 4096 VLANs.
Supports port-based VLAN.
Supports MAC-based VLAN.
Supports basic QinQ.
Supports 1:1 VLAN switching.
Supports N:1 VLAN switching.
QoS Supports port rate limit and trafļ¬c rate limit.
Supports four queues with different priorities on each port.
Supports mapping of packets to different queues based on 802.1p.
Supports multiple algorithms including SP, WRR, and SP+WRR.
Supports trafļ¬c classiļ¬cation based on source MAC address, destination MAC address, source IP address, destination IP address, Layer-4 port number,protocol type, VLAN ID, Ethernet frame protocol type, and CoS.protocol type, and CoS.
Supports trafļ¬c-based priority marking and packet redirection.
IPv6 features Supports IPv6 host functions.
Supports static route conļ¬guration.
Supports IPv6 ACL.
Supports MLD v1/v2 snooping
Multicast Supports IGMP v1/v2/v3 snooping.
Supports multicast load sharing among bundled ports.
Supports port-based multicast rate limit and trafļ¬c statistics.
Port mirroring Supports 1:1 or N:1 port mirroring.
Supports Remote Switched Port
Analyzer (RSPAN) and trafļ¬c-based mirroring.
Supports packet forwarding on an observing port.
Security Supports IEEE 802.1X authentication and the limit on the maximum number of users on a port.
Supports dynamic ARP detection.
Supports IP Source Guard.
Supports multiple authentication methods including AAA, RADIUS, HWTACACS+, and NAC.
Supports binding of the IP address,MAC address, port number, and VLAN ID.
Support port rate limit.
Supports port isolation, port security, and sticky MAC.
Supports packet ļ¬ltering.
Supports packet ļ¬ltering based on MAC addresses.
Supports suppression of multicast, broadcast, and unknown single-cast packets.
Supports limit on the number of MAC addresses to be learned.
Supports CPU protection.
Surge protection Each port has a surge protection capability of 6 KV. Each port has a surge
protection capability of 15 KV after an extra surge protection device is added.
Management Supports iStack.
Supports automatic conļ¬guration.
Supports CLI conļ¬guration.
Supports remote conļ¬guration and maintenance by using Telnet.
Supports SNMP v1/v2/v3.
Supports RMON.
Supports HGMP v2.
Supports SSH v2.
Supports Web management.
Supports GVRP.
Operating environment Operating temperature: 0Ā°C to 50Ā°C (long term); ā€“5Ā°C to 55Ā°C (short term);
relative humidity: 10% to 90% (non-condensing)
Power supply DC:
Rated voltage: ā€“48 V to ā€“60 V
Maximum voltage: ā€“36 V to ā€“72 V
Dimensions: width x depth
x height		 250 mm x 180 mm x 43.6 mm
Weight < 1.4 kg
Power consumption < 12.8 W

 

SKU: LS-S2309TP-EI-DC Categories: , Tags: , ,
Weight 1.4 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Huawei S2300 Series Switch LS-S2309TP-EI-DC”

There are no reviews yet.

Related products