04 3550600 052 7036860

JoeCo Blackbox BBR64-Dante Rack 64-Channel Recorder

Add to Wishlist
Key Features
  • Connect to Dante Consoles And Converters
  • Record and Replay Up to 64 Channels
  • Record up to 8 Channels Via Analog In
  • Record Broadcast WAV 24-bit 44.1/48 KHz
  • Record to USB2 Disk, Flash, SDHC Card
  • Import Audio From Hard Drives To DAW
  • Lock To or Generate Word Clock
  • Playback Lockout and Record Recovery
  • Polyphonic WAV File Support with iXML

22,699.00 د.إ

Add to Wishlist

The JoeCo Blackbox BBR64-Dante 64-Channel Rack Recorder (Digital/Analog) is a single space 19″ rack mountable recorder designed for attaching to a Dante-capable audio over Ethernet console or converter. The device can then receive up to 64 channels of audio simultaneously and record them as 44.1 or 48 kHz 24-bit Broadcast WAV files directly to a USB 2.0 disk drive, USB 2.0 flash drive, or SDHC card with a USB 2.0 adaptor. Higher sample rates are also available but at reduced track counts. You can also record up to 8 channels directly into the recorder via the analog inputs, such as when you want ambient and audience sounds to accommodate a performance.

The front of the device features a bicolor LED array to indicate the status of each recording channel. Two high-resolution LED meters show you the levels on the pre-fader listen bus which you can listen to using the headphone output on the back of the device. You choose which channels to route to the monitor using a data wheel and back control button on the front of the device. The front panel also features a bank of touch-sensitive control buttons and record, stop, and play transport controls. A display on the front right of the unit indicates time code, recording status, and remaining disk space.

The back of the device features input ports for power, synchronization, controls, SPDIF clocks, word clock, USB 2.0 disk drive, headphones, an 8-channel analog D-sub connector, and the Dante RJ-45 Ethernet I/O port.

Connect to Devices Via Dante Ethernet
The recorder connects to Dante-capable consoles and converters that can transmit up to 64 channels of audio data over a standard Ethernet network via Cat 5 cable
Record up to Eight Channels Via Analog Input
You can record up to eight channels of audio directly into the recorder via the analog input for capturing ambient and audience sounds along with the production. Using the eight analog inputs, the recorder has 56 channels left for audio transmitted through Dante
Record Broadcast WAV 24-bit 44.1/48 KHz
The device can record 16-bit or 24-bit Broadcast WAV files at 44.1 or 48 kHz. Higher sample rates are also possible through an iXML software upgrade, but require a reduced overall channel count
Record to USB 2.0 Disk, Flash, SDHC Card
The device records directly to a removable USB 2.0 disk drive, FAT32-formatted USB 2.0 Flash drive, or an SDHC Card in a USB 2.0 adaptor. Using removable media makes it easy to load and edit recordings in your preferred DAW
Headphone Monitoring on Pre-Fader Listen Bus
You can create headphone mixes of individual channels or pairs through a pre fader listening bus for metering and monitoring
Lock To or Generate Word Clock
The recorder can sync with external word clock or generate its own for time-stamping recordings
Playback Lockout and Record Recovery
The recorder is equipped with fail safe systems such as playback lock-out, that prevents you from playing back a file while recording and recording recovery so that you can regain what was recorded if power is lost to the device
Polyphonic Support With iXML
With an optional software upgrade, the device can support iXML, allowing you to embed metadata such as scene, take, location, and notes into Broadcast WAV files using a standard QWERTY keyboard. Installation of iXML also allows the recorder to capture PolyWAV files for use in television and film post production
SKU: BBR64-DANTE Category: Tag:

JoeCo BBR64 Specs

Form Factor
Rackmount
Number of Tracks
64
Maximum Sampling Rate
96 kHz / 24-Bit
Connectivity
Analog Audio I/O
1x 1/4″ TRS Headphone Output
8x DB-25 25-Pin Balanced 8-Channel Input (AES 59/Tascam Pinout)
USB (Non-Host)
1x USB-A (USB 2.0)
Sync I/O
1x 1/4″ TRS LTC Input
1x RCA Coaxial AES/S/PDIF Input
1x RCA Coaxial AES/S/PDIF Output
1x BNC Word Clock Input or Output
Network I/O
1x RJ45 Dante / Ethernet
MIDI I/O
1x DIN 5-Pin MTC/MMC/Open Loop Input
Other I/O
1x DE-9/DB-9 Sony P2/Control
1x Mini-DIN 6-Pin Keyboard / PS/2 Input
Performance
Maximum Input Level
Analog Inputs:
+22 dBu for 0 dBFS
Maximum Output Level
+22 dBu at 0 dBFS
SNR
Analog Inputs:
106 dB
Analog Outputs:
106 dB
THD+N
Inputs:
96 dB (A-Weighted)
Outputs:
94 dB (A-Weighted)
Digital Audio
Audio File Formats
BWF, WAV
Sample Rates
44.1 / 48 / 88.2 / 96 kHz
Bit Depths
16 / 24-Bit (Recording)
24-Bit (AD/DA Conversion)
Frame Rates Supported
23.98 / 24 / 25 / 29.97 / 29.97 DF / 30
Audio Storage & Playback
Supported Media
SDHC Card, USB Flash Drive, USB Hard Disk Drive
File System Support
FAT32
Power
Power Requirements
AC/DC Power Adapter (Included)
AC/DC Power Adapter
9 to 16 VDC (Included)
Power Consumption
25 W (Maximum)
Physical
Rackmount Size
1 RU
Dimensions
16.7 x 5.9 x 1.73″ / 425 x 150 x 44 mm
Weight
5.3 lb / 2.4 kg
Packaging Info
Package Weight
7.25 lb
Box Dimensions (LxWxH)
22.6 x 15.7 x 2.8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “JoeCo Blackbox BBR64-Dante Rack 64-Channel Recorder”

There are no reviews yet.

Related products