NTI HDMI Over Gigabit IP Extender Local Unit up to 333 feet

This is the local unit for the NTI ST-IPHDMI-2G

The NTI ST-IPHDMI-L-2G HDMI Over Gigabit IP Extender multicasts digital video and audio signals to one or more receivers up to 333 feet away over a Second-Generation (2G) 1000BASE-T Gigabit Network connected with CAT5e/6/7 cable.

The NTI ST-IPHDMI-2G Gigabit IP Extender consists of the ST-IPHDMI-L-2G local unit that connects to an HDMI source, and the ST-IPHDMI-R-2G (not included) remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CATx or a Point-to-Many connection via a network switch. Support for multiple transmitters requires a managed network switch.

NTI ST-IPHDMI-L-2G Features and Benefits:

• Supports HDTV resolutions to 1080p.
• Ideal solution for digital signage applications.
• Broadcast real-time HDMI video/audio to multiple display locations.
• Transmits an HDMI signal over one CAT5e/6/7 cable.
• Supports video wall installations from 1×2 to 8×8 screens.
• Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required for Managed network switch.)
• Easily expandable. Add remote units as you add monitors.
• No image scaling, the original video signal that is input will be output at the source resolution.
• Supports 2-way RS232 commands (control software on a PC, or other automated control system hardware such as Control4 or Crestron) to control any devices attached to the matrix using RS232.
• Integrated mounting wings for ease of installation.
• Inexpensive CAT5e/6/7 cable replaces bulky video cables.
• Support for multiple transmitters requires a Managed network switch with VLAN/IGMP support. Standard LAN switches can only support one transmitter.
  • Each VLAN acts as a separate HDMI Over IP Channel on the network.
  • One transmitter can connect up to 200 receivers using cascaded managed network switches.
• If a non-managed network switch is used for a point-to-many connection, it is not recommended to use other network devices on the same switch as it may cause a degradation in performance.
• Use a PC to access the built-in HTTP Interface of the managed network switch to control what signal is being watched at each location.
• Use a Telnet client to access any receiver on the VLAN or network.
• Customizable EDID table on local unit.
• HDCP compliant.
• Local and remote units must be in the same LAN. The units do not support WAN connections.

NTI HDMI over Gigabit IP Extender Diagram
(ST-IPHDMI-L-2G / ST-IPHDMI-R-2G depicted here)

NTI HDMI over Gigabit IP Extender Point-to-Many Connections Diagram

NTI ST-IPHDMI-L-2G Specifications: