04 3550600 052 7036860

OWI Inc. HP-AMP-250BT Rackmount 250W Bluetooth-Enabled Multizone Amplifier

Add to Wishlist
  • 250W at 4 to 16 Ohms or 70/100V Usage
  • 6 Sources plus Bluetooth and MP3
  • Single- or 6-Zone Operation
  • 5 Mic Inputs and 3 Stereo Aux Inputs
  • Mic Priority with Mute Function
  • Multiple Built-In Protections
  • Toroidal Output Transformers
  • Power-Up Muting and Soft Clip Limiter
  • Temperature-Controlled Fan Cooling
  • AC Powered with DC Backup Supply

AED3,299.00

Add to Wishlist

With its six input sources and six zone outputs, the OWI Inc. HP-AMP-250BT rackmount 250W Bluetooth-enabled amplifier offers the flexibility and connectivity to serve as the centerpiece of a sound system in commercial installation applications such as restaurants, retail stores, hotels, clubs, and more.

The rear panel provides inputs to connect microphones, line-level sources, and stereo music players while the front panel features an onboard MP3 player that supports an SD card and USB media. Plus, the integrated Bluetooth receiver allows wireless streaming of audio from your Bluetooth-enabled mobile device. The outputs on the HP-AMP-250BT enable it to deliver 250W at 4 to 16 ohms or properly drive 70/100V speakers. The built-in mixer boasts 2-band EQ, master volume, and independent level controls for all sources and zone outputs.

2 RU amplifier/mixer capable of single- or 6-zone operation
250W at 4 to 16 ohms or 70/100V usage
Six sources—one XLR-1/4″ mic input, two XLR-1/4″ mic/line inputs, two 1/4″ mic inputs, three stereo aux inputs—plus an onboard MP3 player (via SD card or USB media) and a Bluetooth input
Main volume control, 2-band EQ, and independent level controls for all sources and zone outputs
Mic 1 priority with mute function
Mono RCA coaxial send and return jacks
4- to 16-ohm, 70V, and 100V outputs mounted on binding posts, zone outputs on screw terminals, and an XLR mixed-level preamp output (pre-fader to the main volume)
Power, signal, peak, and fault indication
5-segment signal-level indication
Short-circuit, overheating, DC offset, and limit protection
Soft clip limiter protection
Toroidal output transformers provide extended high-frequency response and effectively lower the electrical interference
Power-up muting
AC powered with a 24 VDC backup power supply
Temperature-controlled, high-efficiency fan cooling
SKU: HP-AMP-250BT Category: Tag:
Number of Channels
2
Amplifier Power Rating
4 Ohms / 8 Ohms / 16 Ohms:
250 W
70 V / 100 V:
250 W
Audio I/O
1x Combo XLR-1/4″ TRS Balanced Mic Input (Locking)
2x Combo XLR-1/4″ TRS Balanced Mic/Line Input (Locking)
2x 1/4″ TS Unbalanced Mic Input
3x Stereo RCA Coaxial Unbalanced Aux Input
1x RCA Coaxial Unbalanced Send
1x RCA Coaxial Unbalanced Return
1x XLR 3-Pin Balanced Preamp Output
USB I/O
1x USB-A
Rackmount Size
2 RU
Amplifier
Form Factor/Type
Rackmount
Number of Channels
2
Number of Zones
6
Amplifier Power Rating
4 Ohms / 8 Ohms / 16 Ohms:
250 W
70 V / 100 V:
250 W
Connectivity
Audio I/O
1x Combo XLR-1/4″ TRS Balanced Mic Input (Locking)
2x Combo XLR-1/4″ TRS Balanced Mic/Line Input (Locking)
2x 1/4″ TS Unbalanced Mic Input
3x Stereo RCA Coaxial Unbalanced Aux Input
1x RCA Coaxial Unbalanced Send
1x RCA Coaxial Unbalanced Return
1x XLR 3-Pin Balanced Preamp Output
Other I/O
1x BNC Bluetooth Antenna Input
Speaker Outputs
6x Screw Terminal 70 V Zone
1x Binding Post Pair 100 V
1x Binding Post Pair 70 V
1x Binding Post Pair Low-Z
USB I/O
1x USB-A
Media/Memory Card Slot
Single Slot: SD/SDHC
Power
AC Input Power
110 VAC, 60 Hz
AC Power Connector
1x IEC
DC Input Power
24 VDC
Physical
Rackmount Size
2 RU
Dimensions
19.0 x 3.9 x 15.7″ / 48.3 x 9.9 x 39.9 cm
Weight
24 lb / 10.9 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “OWI Inc. HP-AMP-250BT Rackmount 250W Bluetooth-Enabled Multizone Amplifier”

There are no reviews yet.

Related products