Specifications |
I/O |
Dual I/O supports failover/failback and active/ active drive access |
Drives Included |
No drives included |
Drive Support |
Up to sixteen 3.5ā x 1ā hard drives SAS 3Gb/s, SATA II 3Gb/s and 1.5Gb/s
Supports any mix of SAS and SATA drives simultaneously in the same enclosure |
External I/O Ports (per controller) |
Each I/O module has two SAS ports using industry standard Mini SAS 4x wide-port-SAS connectors (SFF-8088), one IN and one OUT for cascading JBODs |
Management Functionā With Expander Embedded |
SMP ā SAS Management Protocol In-band access to Expander and PHY information Statistic counters and performance monitors SES EM ā SES
Enclosure Management (ANSI T10 SES 2 Compliant) SCSI SES command set over virtual SSP device |
Supported Operating Systems |
Windows 2003, Linux (Red Hat, SuSE) |
Management Tools/Interface |
LED status indicator support for drives, FRU and enclosure environmentals In-band SES enclosure management alerts user to out of spec operation: thermal condition, voltage condition or component failures, protecting data and hardware
Full subsystem management CLI through out-of-band RS232 serial port |
Enclosure Management Protocols |
SES over in-band SAS |
Voltage |
100-240 Vac Auto-Ranging |
Current (Maximum) |
8 A @ 100 Vac; 4 A @ 240 Vac (current rating with two power cords) |
Power Supply |
Dual 500W, 100-240 Vac auto-ranging, 50-60 Hz, dual hot swap and redundant with PFC, N+1 design |
Power Consumption |
108.38 Watts (under load w/o HDD), 523.91 Watts (under load with SAS HDD) |
Operating Temperature/ Humidity |
5°~40°C (-40°~60°C non operational) / Maximum 95% |
Vibration |
Random, 0.21 grms, 5-500Hz, X, Y, Z axis |
Dimensions |
13.1x 44.65x 56.1 cm (5.2 x 17.6 x 22.1in) |
Weight |
Net weight: 30.5 kg (67.2 lbs) without drives, 38.5 kg (84.9 lbs) with 16 drives
Gross weight: 37.5kg (82.7 lbs) without drives |
Safety |
CE, FCC ClassA, VCCI, cUL, TUV, CB, BSMI, C-Tick, MIC |
There are no reviews yet.