QNAP TR-002 – Hard drive array


2 bays (SATA-600) – USB 3.1 Gen 2 (external)

د.إ999.00

The TR-002 USB 3.1 Gen. 2 RAID expansion enclosure allows you to expand the capacity of your QNAP NAS and PC. The TR-002 can also be utilized as a DAS (Direct-attached Storage) device, allowing you to directly access its content just by connecting it via USB. The TR-002 features two 3.5-inch SATA drive bays with USB 3.1 Gen. 2 Type-C connectivity to bring you a highly-reliable and secure storage capacity expansion solution.

Effective storage expansion with RAID Support

The TR-002 is an ideal storage expansion solution for PCs, especially for laptops which lack the ability to install higher-capacity drives. Featuring two 3.5-inch SATA drive bays and supporting RAID configuration, the TR-002 provides the ability to store a vast number of files and data and to ensure protection against potential drive failure.

Supports various RAID levels

The TR-002 supports various RAID configurations. Depending on your requirements, you can switch between hardware- or software-controlled RAID modes. Move the DIP switches to corresponding positions for your ideal RAID mode: Individual, JBOD, RAID 0 or RAID 1. You can also configure the RAID settings from your QNAP NAS, or by using the QNAP External RAID Manager utility on your computer.

Flexible storage configuration and management

Compared with other RAID enclosures, the TR-002 provides software-controlled configurations for greater management flexibility. Users can configure RAID and monitor disk health using Storage & Snapshots Manager on a QNAP NAS, or by using the QNAP External RAID Manager utility on their computer.

Product Description QNAP TR-002 – hard drive array
Device Type Hard drive array
Interface USB 3.1 Gen 2
Installed Devices / Modules Qty 0 (installed) / 2 (max)
Supported Drives SATA-600
Storage Controller RAID (SATA 6Gb/s) – RAID RAID 0, 1, JBOD
Storage Controller Quantity 1
Hard Drive No HDD
Power AC 120/230 V
Dimensions (WxDxH) 10.2 cm x 21.9 cm x 16.85 cm
Weight 1.37 kg
General
Device Type Hard drive array
Chassis
Installed Devices / Modules Qty 0
Supported Devices / Modules Qty 2
Supported Drives SATA-600
Storage
HDD Array External Interface USB 3.1 Gen 2
Storage Controller
Type RAID
Installed Qty 1
Interface Type SATA 6Gb/s
RAID Level RAID 0, RAID 1, JBOD
Storage Controller (2nd)
Installed Qty 1
Hard Drive
Type No HDD
Expansion / Connectivity
Expansion Bays 2 (total) / 2 (free) x hot-swap – 2.5″ / 3.5″ shared
Interfaces 1 x USB 3.1 Gen 2 – 24 pin USB-C
Miscellaneous
Features Security lock slot (cable lock sold separately), built-in cooling fan
Cables Included 1 x USB-C to USB-A cable
Included Accessories 2 x keys, cable clip, 6 x screws (for 2.5″ HDD), 8 x screws (for 3.5″ HDD), power cable
Power
Power Device External power adapter
Voltage Required AC 120/230 V
Power Consumption Operational 10.15 Watt
Power Provided 36 Watt
Power Consumption Stand by 2.98 Watt
Dimensions & Weight
Width 10.2 cm
Depth 21.9 cm
Height 16.85 cm
Weight 1.37 kg
Environmental Parameters
Min Operating Temperature 0 °C
Max Operating Temperature 40 °C
Humidity Range Operating 5 – 95% (non-condensing)
Sound Emission 17.8 dBA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “QNAP TR-002 – Hard drive array”

There are no reviews yet.